How To Clear Toilet Line Septic Tank? (Solution found)

If a clog is still present, you can mix baking soda and vinegar to form a natural drain cleaner that is safe for a septic system. Pour one cup of baking soda into your toilet, trying to get as much as possible in the hole in the center. After that has settled, pour two cups of white vinegar over the baking soda.

survivaltechshop.com

  • The solution is often as simple as using a plunger or toilet auger to clear the blockage from your toilet. Back-Upped Waste Means Full Tank If you flush the toilet and it comes up in the tub or shower, or into a fixture on a lower floor of the house, your septic tank is most likely full.

How do you unclog a septic tank line?

Sprinkle the drain with baking soda, then dump vinegar into the pipe. Leave the mixture to sit in the pipe for an hour or two. Finally, flush the drain with hot water. If the clog is small, this could be enough to clear the pipe.

How do you unclog a toilet main sewer line?

Mix 1/3 of a cup of vinegar with 1/3 of a cup of baking soda and pour the fizzy mixture into the clogged sewer drain immediately. If you don’t know how to unclog main sewer line, take advantage of vinegar to eliminate the grime, grease, and hair in the pipe. Flush the pipe with hot water after one hour.

Why does my septic keep clogging?

A clogged septic tank or drain is caused by a number of things: An obstruction in the line caused by a buildup of pressure between the object and the inner circumference of the pipe. An example is a diaper stuck in the sewer drain line. There is simply too much diaper to fit through the line at once!

How do you unclog a sewer line without a snake?

How to Unclog a Main Sewer Line Without a Snake

  1. Step 1 – Run Hot Water.
  2. Step 2 – Use a Chemical Drain Cleaner.
  3. Step 3 – Apply the Plunger.
  4. Another Way – High-Pressure Water.
  5. If Water Goes Through It Or To It, We Do It!

What will dissolve toilet paper in a sewer line?

You can break down toilet paper with different methods such as pouring vinegar and baking soda, Epsom salt, dish soap, or RID-X. You can also decompose the clog with tools like toilet snakes or plungers.

How do I unclog my main sewer without a cleanout?

Use a Plunger to Clear a Main Drain Clog

  1. Choose a toilet on the ground floor.
  2. Tape over the tub, sink and shower drains with duct tape.
  3. Get a bellows or force-ball plunger, insert it in the toilet bowl, let it fill with water and then plunge away.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

Will toilet flush if septic tank is full?

Toilets Flush Slowly When your septic tank is excessively full, your toilet may start acting odd. You might find that your toilet doesn’t fully flush or flushes very slowly and odd noises occur when you flush your toilet. These noises usually sound like gurgling or bubbling.

How long does it take to unclog a main sewer line?

The acid in these drains destroys the lining of your sewer pipes. That’s why smart homeowners choose professional drain cleaners to restore their pipes quickly. Drain cleaning from the professionals just takes a couple of hours. You can expect your cleaning company to finish the task in less than three hours.

Does vinegar unclog pipes?

Along with gravity, this pressure helps remove unwanted goop out of the pipes and unclogs drains. Baking soda, vinegar and boiling water can help clean drains naturally, but you may need something stronger, like Liquid-Plumr, to fully unclog those really tough drain clogs.

My Toilet is Overflowing! How Can I Unclog It When I’m Using a Septic System?

It is never recommended to utilize drain cleaners or chemical clog removal solutions when you are dealing with a septic system. It is possible that these chemicals will harm your septic tank by killing enzymes and bacteria that help to break down waste in your tank. However, if your toilet is blocked or overflowing, you may be unsure of what to do if you do not have access to these drain cleaners. Here are a few methods for unclogging your toilet that do not need the use of chemical drain cleaning solutions.

If you have a toilet, you should always have a plunger and/or a snake on available to deal with any emergencies.

A plunger is a tool that employs suction to force air down the toilet and clear clogs from the system.

Used correctly, these two tools will be able to clear the vast majority of blockages that you may encounter in your toilet.

  • Bring a big pot of water to about boiling temperature on the stovetop, then pour it into the center of your toilet bowl.
  • Allow the water to make its way through your toilet before flushing the toilet.
  • Never use boiling water because the water may be too hot and can cause cracking in porcelain that is too cold.
  • It is safe to use on a septic system because it is made of natural ingredients.
  • After the baking soda has had time to settle, pour two cups of white vinegar over the top.
  • The fizzing motion will aid in the dislodgmentation of any obstructions within your toilet.
  • The objects you flush down your toilet and down your drains can all have an influence on your septic system’s performance.
  • Items such as toilet paper, shampoo, cleaning supplies, laundry detergent, and dish detergent fall under this classification.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

If you need to get to a clog that is further inside a pipe, you might want to consider utilizing a mechanical auger to cut through it. Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

  1. 1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.
  • Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
  • However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.
  • Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.
  • If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.
  • Advertisement
  • s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.
  • Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.
  • 4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.
  • If at all possible, take a shower or bath as soon as possible after working on your septic tank
  • When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.
  • 5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.
  • Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.
  • 6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.
  • Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.
  1. In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.
  • If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.
  • 2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.
  • It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price
  • 3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.
  • It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.
  • 4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it
  • If you remove the clog, water will start flowing through the pipe again while you have the auger inside it
  • Mechanical augers come in different lengths, so if you aren’t able to reach the clog with the one you’re using, try renting the next longest size
  • Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.
  • It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.
  • 6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished
  • Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.
  1. 7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement
  1. 1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
  2. Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.
  • Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.
  • As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank
  • 2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.
  • It will also save you money on your utility bills if you keep your water consumption to a minimum.
  • 3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.
  • Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.
  • 4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping
  • Not every septic system will be equipped with an effluent filter
  • However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.
  1. 5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement
See also:  What Should I Plant Over Septic Tank? (Solved)

Create a new question

  • Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
  • Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty
  • Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
  • They are available.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Advertisement

Things You’ll Need

  • Advertisement

About This Article

Advertisement

Did this article help you?

If you have ever had to deal with a clogged drain, you are aware that the cleanup procedure is anything but enjoyable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.

Symptoms of a Clogged Drain

In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.

See also:  How To Fix A Clogged Toilet With A Septic Tank? (Perfect answer)

2. Water Going the Wrong Way

Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Before you call a septic company, there are a few things you may do to try to unclog your drain on your own that may be successful.

1. Avoid cleaners with chemicals

Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

2. Pour hot water down the drain.

In many cases, chemical-laden cleansers degrade the enzymes in your septic system, which are designed to assist in the breakdown of waste. Instead, choose a drain cleaner that is suitable for septic systems and does not include any harsh chemical ingredients. A professional cleaner should always be kept on call in the event of an unexpected situation.

3. Use baking soda and vinegar.

If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area.

Septic systems are something we are very familiar with, and we can handle just about any septic problem, including a clogged drain or septic line, thanks to our 40 years of experience. If you have any reason to believe that there is an issue with your system, please contact us.

who should you call for septic issues?

Try dissolving the clog using a baking soda and vinegar reaction if water alone does not clear the blockage. Pour a few spoonfuls of baking soda down the drain, followed by a cup of vinegar, and flush the system. Waste is broken down and the flow of things is restored as a result of the effervescent explosion. The fact that you are unable to unblock the blocked drain by yourself may indicate that the problem has reached a deeper level. Alternatively, there might be a blockage that is greater than merely food clogging a septic system pipe.

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to offering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana region.

“They pump, we clean!” is our company motto.

If you have any reason to believe that your system is experiencing difficulties, please contact us.

How to Unclog a Septic Tank Toilet

Unclogging a toilet that is linked to a septic tank may be a difficult task since you cannot use chemical clog removers such as Green Gobbler or Drano Max Gel because these chemicals would destroy the enzymes and bacteria in your septic system that are necessary for waste breakdown. Some of these chemicals are so potent that they might really cause harm to your septic system if not used properly. When it is not possible to utilize drain cleaners or chemical clog removers, how can you go about unclogging your septic tank toilet without resorting to chemicals?

One of these is quite likely to be successful.

Toilet Plunger

When it comes to unclogging a septic toilet, the first option that has been proven time and time again is the use of a toilet plunger. First and foremost, it is critical to recognize that not all plungers are created equal. Some plungers are designed to be used in sinks, while others are designed to be used just in toilets. A toilet plunger differs from a sink plunger in that it does not have flat bottoms, and it is supplied with a flange that is designed to fit exactly into the curvature of the toilet bowl.

  1. You must use the proper plunger for the job.
  2. Plungers with a flange that folds into the rubberized plunging cup are common in this category.
  3. Ensure that you have covered the floor of your bathroom with old newspapers before you begin plunging.
  4. Once the plunger is depressed, release it.
  5. Following that, begin repeatedly pressing the plunger down with force to ensure that the seal is not compromised.
  6. After a few seconds, water should begin to flow down the drain, indicating that your toilet has been unclogged.

You should try repeating the procedure a number of more times before going on to the next way if this doesn’t work for you. Sometimes a blockage might be so stubborn that even a few plunges aren’t enough to remove it completely.

Plumbing Snakes/Augers

You should consider utilizing a plumbing snake or auger if using a toilet plunger did not work for you. You may purchase an auger at your local home improvement or hardware shop if you do not already have one. You can get away with using a cheaper snake or auger to get the job done, but you’ll run the danger of scratching your toilet bowl, so make sure you invest in a high-quality item. Start by uncoiling the wire end of the plumbing snake and inserting it into the toilet, if you have one available.

If the toilet does not unclog after several attempts with the plunger, continue to try a couple more times before giving up and calling a plumber.

Dishwashing DetergentHot Water

As previously said, you should avoid using any chemical uncloggers since they have the potential to do significant damage to your septic system. Even if the two previously described ways do not work to unclog your toilet, there are some DIY options that you may experiment with. To begin, measure up a teaspoon of dishwashing soap and pour it into the bowl with the other ingredients. Don’t go crazy with the amount of salt you use. From then, you want to let your toilet bowl in its current state for 10-15 minutes before flushing it.

Please keep in mind that the water should not be heated over the boiling point of water (212°F), since boiling water can actually harm or shatter your toilet bowl if it gets too hot.

If you’re pouring the water, avoid getting too near to the bowl since you’ll need the force of the pouring to be significant in order to drive the clog lower, which is why we recommend pouring at waist height.

There are multiple times that you will need to use this procedure before you will notice any benefits.

Baking SodaAcidic Liquid

Another tried-and-true natural approach for unclogging a toilet is to combine baking soda with any acidic liquid, especially white vinegar because of its exceptional cleaning characteristics. Lemon juice can be used as a substitute to vinegar, although it will not be as effective as vinegar in this situation. Using a spoon, scrape out some of the water in the toilet bowl before adding the baking soda to the bowl. Following that, add an amount of baking soda equal to approximately half a box on the baking soda, and then gently pour an entire bottle of vinegar on top of the baking soda, resulting in a bubbling chemical reaction.

In the meantime, you want to have a couple of gallon of water heated to just below boiling point and then pour it into the toilet while you are waiting.

Final Thoughts

Another tried-and-true natural approach for unclogging your toilet is to combine baking soda with any acidic liquid, particularly white vinegar because of its exceptional cleaning capabilities. Lemon juice can be used as a replacement to vinegar, however it will not be as effective as vinegar in this case. Using a spoon, scoop out some of the water in your toilet bowl before adding the baking soda and flushing. Following that, sprinkle an amount of baking soda equal to approximately half a box onto the baking soda, and then gently pour an entire bottle of vinegar onto the baking soda, causing a bubbling chemical reaction to occur.

Allow it around 30 minutes for the chemical reaction to work its magic. The water should be heated to just below boiling point, and then dumped into the toilet while you’re waiting for the toilet to flush.

SEPTIC PROBLEMS THAT CAN MIMIC DRAIN CLOGS

Your bathroom drains may be running slowly, and you may be thinking pouring some chemical drain cleaner down the drain to clear the clog. However, in these situations, rather than relying on potentially harmful drugs, it is always preferable to consult with medical specialists for a diagnosis. Instead of a simple clogged drain, you may be dealing with a plumbing vent problem, a sewer line problem, or a septic system problem instead. Learn about three septic issues that might manifest themselves in ways that are similar to drain obstructions.

  • An entrance baffle and an output baffle are standard features of a septic tank.
  • The intake baffle assists in the smooth entry of wastewater into the tank.
  • This form of obstruction, like a drain clog, will cause drains to slow down or stop completely.
  • 2.
  • In addition, there is the pipe that runs from your house to the septic system.
  • In addition to blockages, this main line is subject to earthquake damage, damage from huge machinery being driven over the region, and tree root damage, no matter what material it is constructed of.
  • Failure of the Drainfield It is possible that some homeowners are unaware that septic systems have a limited lifespan.

For this reason, you must have a reserve leach field site set aside when installing your sewer system, as mandated by federal laws.

One occurs when a large amount of solid waste is introduced into your system, causing them to get clogged to the point where they must be replaced.

Compaction is another issue that can cause a leach field to fail prematurely if it is not addressed.

Due to the fact that the field’s functioning is dependent in part on bacteria that require air in the soil to survive, this might render the region unusable.

Some of the symptoms of these three septic illnesses might be mistaken for those of a normal plugged drain in some cases.

Consequently, if you feel your drains are slowing down, get a professional to come out and take care of the problem.

Contact Upstate Septic Tank, LLC as soon as possible if you are in need of a diagnostic visit, sewer line cleaning, or a septic system cleaning and pumping. We’ll be pleased to assist you in keeping your septic system in the best possible condition.

How to Unclog a Drain and Septic Tank : Tips and Tricks

  • Plumbing
  • Unclogging
  • Septic Tank
  • Blocked
  • Septic System
  • Pipes and Drains
  • How to Plumbing

Pumping out a Septic Tank, Unclogging a Septic System, Pipes and Drains, Plumbing Tips, and more.

Reasons for a clogged bath or kitchen drain:

  • Dumping food or solid stuff down the drains is prohibited. Putting oil or other sticky substances into the kitchen sink
  • Dumping chemicals or paints down the drains is not acceptable. Hair down the drains of the bathtub and shower
  • Ventilation that is improper and/or insufficient Drainage system that is clogged Septic intake or outlet that is clogged

Common Causes of Clogged Drains

Making a mess by pouring food or solid stuff down the drain; Emptying the kitchen sink of grease and other sticky substances. Chemotherapy drugs or paints being poured down the drain; Bathtub and shower drains clogged with hair ventilation that is insufficient and/or improper Main drain tube is clogged; Septic intake or outlet that has become clogged.

Ways to unclog a drain:

  • Baking soda and vinegar drain unclogging is an alternate and more natural method of unclogging a clog in the drain. Vinegar and baking soda have no negative impact on the environment. A plunger can be used to clear a clogged drain. This method will work for clogs of modest size and will not cost you much money. If the obstruction continues, consult with a professional. Although it is more expensive, unclogging a drain with a cable or auger may be quite successful in removing solid obstructions in the drain and even breaking through thick roots
  • Yet, it is also more efficient. Pouring paint or other sticky and oily materials down the drain can produce blockages, and high-pressure water jetting is more successful at clearing them.
See also:  How Much Electricity Does Septic Tank Make? (Question)

Before you begin utilizing high-pressure water jetting to unclog your drain, be sure that your pipes are capable of withstanding the high pressure that will be applied by the high-pressure jet. Otherwise, the high pressure will rip your pipes apart. Hydro jetting is best left to the professionals, such as your local plumbers.

Ways to avoid clogged drains and a full septic tank:

  • Avoid blocking your sink drain by pouring solid objects or oily stuff down it. Cover the drains in your toilet and kitchen with filters to protect hair and solid things from entering the drain system. Make certain that suitable numbers of air vents are provided, and that the diameters of the vents are acceptable for all of your fixtures.

Problem II: All of your home’s drainage lines are sluggish to drain, and the drain water from the main drainage line is backed up in a pool.

Possible causes for a slow drain:

  • An obstruction has formed in a section of the main drain line
  • An obstruction has formed at the drain intake or outflow of the septic tank. A section of the percolation pipes has become jammed
  • The septic tank vent has become obstructed. Low temperatures have caused the sewage tank or septic vents to become iced over
  • One of the distribution boxes has been blocked off

Ways to unclog a main drain or full septic tank:

  • To unclog the main drain line, use a snake or high-pressure water jetting. This is the work of a professional. By virtue of his knowledge and experience, he can snake a sluggish drain, determine if the blockage is caused by solid waste, oily substances, or roots, and apply the most appropriate procedure to unclog the drain. Verify that there is no blockage at the entrance or exit of the septic tank owing to solid wastes or scum, among other things. Check the distribution box, which is placed between the septic tank and the percolators, for easy flow once the block has been removed. If there are any obstacles, they should be removed. Check the region around the percolators for any problems. Check to see whether the area is damp, marshy, or smelly. It indicates that the percolation process is not working properly. Another type of work is where the earth is not absorbing the drain water at the same pace as it is being discharged. It might be because your water use has increased recently as a result of the increased number of guests, or it could be because the soil has been saturated as a result of moisture from other sources such as rainfall (which has been above average), or both. If your septic tank has frozen due to inclement weather, call an expert right away
  • If your septic tank has frozen due to inclement weather, call an expert right away. Use the septic tank as a storage tank until the tank has completely thawed on its own if you can’t find a professional or the tools you need to do the job. You will be able to hang on for a longer period of time if you make wise use of water. Winterizing the septic tank before the following winter will help to prevent it from freezing in the future.

Preventive measures to avoid a blocked main or slow drain:

  • Please be considerate of your septic tank. It is intended solely for the disposal of organic waste materials. Avoid depositing non-biodegradable and inorganic garbage in landfills. They will very certainly overflow a septic tank and interfere with the regular operation of the septic tank. Use drain filters in your toilet and kitchen to catch hair and solid things that are flowing down the drain. In order to avoid the septic tank from freezing in the winter, it should be winterized. If you are considering a lengthy trip, you should empty your septic tank and seek professional assistance. Winterization is dependent on the area and weather conditions. A simple investment here will spare you from all of the difficulties you may face throughout the winter.

External References

  • Your septic tank deserves respect. Specifically, it is intended for use in the disposal of organic waste. Prevent the disposal of nonbiodegradable and inorganic trash. There is no doubt that they will fill up the septic tank and interfere with the regular operation of the septic tank. Remove hair and solid debris from your drains by placing filters over them in your toilet and kitchen
  • The septic tank should be winterized in order to avoid freezing in the winter
  • If you’re going on a lengthy trip, you should empty your septic tank and get professional assistance. Temperature and weather conditions dictate where winterization should be performed. The winter will be much easier if you make a tiny investment here
  • Else, you will suffer greatly.

Related articles:

That feeling you get after flushing the toilet and nothing comes out is wonderful, isn’t it? It might be amusing to hear your toilet gurgle or to hear the water flowing continually, but it can also be frightening to hear the water level climb as you watch it. It’s an unpleasant situation, not to mention that it necessitates a great deal of hard effort and elbow grease in the process of plunging and cleaning up the subsequent mess. When anything gets stuck in your pipe or your toilet makes a mistake, you may have blockages and backups.

  1. Clogs can form inside your septic tank from time to time, causing blockages in the tank and drainage troubles to arise.
  2. What if we told you that you could fix it yourself?
  3. While bringing in a professional may be required in certain cases, there are several things you may do to resolve the situation without calling for assistance right immediately.
  4. In your search for solutions to unclog your septic tank, you may want to try things like slowly pouring hot water down the drain or pouring vinegar down your drains to break up obstructions, to name a few possibilities.
  5. In order to clear blockages from your drain, you may need to use a professional drain cleaner that you pour down the drain.
  6. However, although these chemical cleaners will eat away at obstructions, they will also kill off beneficial bacteria in your tank, disrupting the delicate bacterial balance in your tank.
  7. Yes, the nasty bacteria will die off, but the healthy bacteria will also die off.

With regard to drain cleaners, the best option is to select one that has concentrated bacteria and enzymes that will eat away at the dangerous bacteria and materials in your tank while simultaneously boosting the amount of helpful bacteria and enzymes in your tank.

In the case of trying to rehabilitate your septic system, using a product such asSeptic Blastcan be really beneficial.

After that, the product will begin to gently eat away at the obstructions in your tank, therefore it’s vital to be patient throughout this process.

It is possible that you may need to repeat this method every day for several days in a succession before the blockage is completely removed.

Your septic tank has now been cleansed and returned to its original level of functionality.

Fortunately, here at Green Gobbler, we provide excellent alternatives to harsh chemicals and maintenance supplies, allowing you to address your problems while minimizing the impact on the environment and your plumbing system. Choose Septic Blast to do the task right away!

Will Septic Tank Cleaner Clear a Clog in a Toilet?

Cleaning products for septic tanks have been shown to reduce the efficacy of the tank. Beneficial bacteria are required by the septic system in order to break down waste. The proper maintenance of a septic system maintains the tank operational and lowers the likelihood of wastewater backing up into the toilet.

Preventive Maintenance

A septic system must be pumped out on a regular basis since part of the stuff in the tank will not break down. According to Mother Earth News, no device can completely eliminate the need to pump the tank. Allowing a buildup of waste to collect in the tank has the potential to block the system and cause harm to the septic field. An yearly examination, as well as a regular pump out, can assist to avoid costly difficulties in the future. Items such as paper towels, baby wipes, and feminine hygiene products should not be flushed since they might block the plumbing system.

Unclogging the Toilet

A clogged toilet is a different problem from a clogged septic system. If you’re wondering if a septic system product would work to remove a toilet clog in a hurry, the answer is no. Septic system products are not designed to clear blockages and are thus unlikely to be of use. Even chemical drain cleaners – items designed to unclog plumbing – are only effective in clearing small obstructions from the system. When it comes to unclogging a blocked toilet, a plunger or a toilet snake are both preferable options.

When To Empty Your Septic Tanks

When Should Your Septic Tanks Be Emptied? If your septic system is causing you problems, you may want to consult a professional. Is it interfering with your normal activities? If this is the case, you may be dealing with septic failure, and you don’t want to have to deal with this unpleasant situation for a lengthy period of time. Septic tanks may last for more than 50 years if they are properly maintained and cared for. As a result, many septic tanks are not performing up to their full capacity since most homeowners are unaware of the dos and don’ts of tank maintenance.

It starts in your toilet and kitchen appliances such as sinks, bathtubs, and toilets, and then goes via your sewage line and into your septic tank.

The majority of septic issues may be prevented by performing regular inspections and maintenance on the system.

The experience of dealing with them may be quite distressing.

The moment you get the distinct impression that something is not quite right, or you begin to observe any of the indicators listed below, it is essential to seek expert assistance. Here are some things to keep an eye out for:

6 Signs It’s Time to Empty Your Septic Tank

You will notice a foul odor as the first indication that it is time to hire a professional for cleaning services. The waste in your septic tank emits foul-smelling fumes, which you should avoid at all costs. The presence of these gases will be detected in the air around the tank once the waste level reaches a certain level near the top. As a result, the moment you notice anything foul or unusual coming from your septic tank, act quickly to prevent the situation from becoming worse.

Gurgling in the Plumbing

In the event that you don’t smell anything, you may be able to hear something. As you flush the toilet or wash the dishes, you will hear gurgling within the pipes as the septic system begins to back up and backup. This gurgling is caused by a clog in the air flow, which prevents the correct flow of air. Make an appointment with a professional to get the septic tank drained before any other unpleasant indicators begin to appear.

Toilets Flush Slowly

When your septic tank is overflowing, it is possible that your toilet will begin to behave strangely. When you flush your toilet, you may notice that it does not completely flush or that it flushes extremely slowly, as well as that strange noises are made. These sounds are typically described as gurgling or bubbling. In addition, the water in your bathtub or shower drains considerably more slowly than it normally would. There is a possibility that these are signs of a clog or that your septic tank is overflowing.

Pooling Waters

The presence of standing water in your yard is never a good omen. Your septic tank has reached its full capacity if you notice pooled water or moist areas surrounding it, which indicates that it has surpassed its limit. The solid waste begins to clog the system, and the surplus liquid begins to rise to the top of the system’s capacity. This results in squishy spots that, if not addressed immediately, will rapidly turn into pools.

Faster Growing Grass

Because of the backup of waste in your septic tank, your grass may grow at a faster pace than the rest of your lawn when your septic tank is experiencing problems. Keep an eye on the grass near the septic tank during the growing season as you perform your yard care to observe whether the thickness or growth rate has altered over time.

Backup

Sewage backups are one of the most concerning indicators of a failing septic system since it indicates that wastewater is backing up into your sinks, bathtubs, or even your basement. When a septic system fails and creates significant sewage backup, do not attempt to clean up the mess yourself! Wastewater may be toxic, which means it can be detrimental to you and your family if you drink it. If you notice any of these signs, it is vitally critical that you contact a septic consultant and your water provider right once to get the problem resolved.

There is no such thing as being too cautious when it comes to your aquarium.

If you’re in need of assistance, you can always turn to the professionals at Caccia Plumbing for aid.

There are several expert technicians on our team, all of which are highly qualified and experienced. Get in touch with us at (650) 376-6800 to learn more about how we can assist you or to make an appointment as soon as as. Dev 22021-11-18T14:31:58+00:00 Button for Making a Phone Call

Leave a Comment

Your email address will not be published. Required fields are marked *