Where To Buy Concert Septic Tank? (Solution)

What is the best way to cover a septic tank?

  • Mulch can be added to the area covering the septic tank and drainfield if snow cover is inconsistent – especially if grass or other vegetation cover is not available. It is always best to limit any traffic on top of the drainfield (vehicular, human or animal).

How much does a 1000 gallon concrete tank cost?

How much does a 1000 gallon concrete septic tank cost? Answer: The average retail cost for a 1000 gallon concrete septic tank is $1062.50.

Which is better cement or plastic septic tank?

Cement Septic tanks are very durable than plastic tanks and, if kept properly, can have extended longevity. With regular draining and proper maintenance, a cement septic tank can last for up to 40 years. Cement septic tanks are resistant to environmental changes such as tree roots or changing soil conditions.

What size is a concrete septic tank?

What sizes do concrete septic tanks come in? Standard tank sizes are 1000 gallon, 1250 gallon, and 1500 gallons nationwide.

How long do cement septic tanks last?

Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.

What is the cheapest septic system?

Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

Do concrete septic tanks leak?

The most common problem with concrete septic tanks is that they crack, which causes leaks and problems with soil contamination. If the leaks are only minor, usually they can be repaired and sealed; allowing you to get more life out of your tank.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How deep should a septic tank be?

Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.

What are the dimensions of a 500 gallon concrete septic tank?

500 Gallon Siphon Tank Package Overall Length: 79” Overall Width: 48” Height to center line of inlet: 48” Height to center line of outlet: 48”

Does heavy rain affect septic tank?

It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.

How do concrete septic tanks work?

The septic tank is a buried, water-tight container usually made of concrete, fiberglass, or polyethylene. Compartments and a T-shaped outlet prevent the sludge and scum from leaving the tank and traveling into the drainfield area. The liquid wastewater (effluent) then exits the tank into the drainfield.

Will a concrete septic tank float?

A precast concrete septic tank will never “float” to the surface as some lighter weight tanks can do in certain situations. With a specific gravity of 2.40, precast concrete septic tanks resist buoyant forces better than other septic tank materials.

Septic Tanks

The residential septic tanks we manufacture are made of precast concrete, providing homeowners in New England with a dependable wastewater management system. Shea’s precast concrete septic tanks are sturdy, waterproof, and ecologically friendly, making them an excellent choice for any home waste management system in the world. These precast septic tanks are manufactured to your specifications and are also simple to install in your house or business. For more information about our precast concrete residential septic tanks, please contact Shea Concrete Products at (800) 696-SHEA.

Take a look at the Case Study

Septic Tank 1000 Gallon

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.

Single Compartment Septic Tanks

A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


600 Gallon Single Septic Tank

Specifications:

  • Overall height is 62 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of outflow is 49 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Single Septic Tank

Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Septic tank with a single compartment made of steel reinforced concrete A single piece is used for the lower area so there are no seams to come into touch with effluent. Specifications:
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Single Septic Tank

A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 68 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,400 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Single Septic Tank

Approximately 60″ in height, 117″ in length, 68″ in width; 52″ in height to center line of intake, 49″ in height to center line of outflow; 10,400 lbs in weight; 117″ in length, 68″ in width.

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


25003500Gallon Single Septic Holding Tanks

Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:

  • Overall height is 68 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 61 inches
  • Height to center line of outflow is 61 inches
  • Weight is 16,000 pounds.

Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:

  • Overall height is 98 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 91 inches
  • Height to center line of exit is 91 inches
  • Weight is 20,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


Dual Compartment Septic Tanks

Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Dual Septic Tank

Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Dual Septic Tank

Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


Triple Compartment Septic Tanks

Description:Three-compartment system with a solids separator between the first and second compartments.

Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 12,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.


Chlorine Contact Tanks

Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.500_gallon_chlorine_contact_or_grease_interceptor.pdfDownload File


Siphon Dose Tank Packages

Specifications:

  • It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1250 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
See also:  How Time Does It Take To Pump 750 Gallon Septic Tank? (Best solution)
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1500 Gallon Siphon Tank Package

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of intake is 52 inches
  • Height to center line of exit is 52 inches
  • Weight is 13,000 pounds
  • Includes indoor alarm and alarm float
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1000 Gallon Septic Tanks

Our 1000 gallon septic tank, which is constructed of precast concrete, has a capacity of 1000 gallons of liquid capacity. With this mid-seam design concrete septic tank, you may connect the pipe from the home to either one of the tank’s side or center inlets, depending on your preference. The same choice is accessible at the tank’s outlet, whether it is exiting to the leach field from the tank’s side or exiting from the tank’s central outlet. To connect the pipe entering and exiting the precast construction, Polylok IV closed-end boots are utilized.

ASTM C 1227NPCA is fully compliant with all best-practice criteria.

1000 Gallon Septic Tank DimensionsDetails
Tank dimensions 8’ x 5’8” x 5’2”
Number of bedrooms supported Formerly 2 Now used as a pump station, holding tank, or adding to an existing system
Pre-assembled Yes
Ideal for high water table No, but our 1000 gallon monolithic septic tank is.
Average retail cost $1062.50
Number of covers (lids) 2
Can come in traffic rated (H20) capacity Yes
Concrete strength 5,000 PSI
What are its gallons per vertical inch 21
Weight 8,600 lbs.
Fiber re-enforced Yes
Number of inlets boots (Up to schedule 40pipe can slide through) 3
Height of inlet from bottom of tank to bottom of pipe 51”
Number of outlets boots (Up to schedule 40 pipe can slide through) 3
Height of outlet from bottom of tank to bottom of pipe 48”
Required height of inlet baffle (20% of liquid level) 9”
Required height of outlet baffle (40% of liquid level) 18”

Frequently Asked Questions

In response to your question, the typical retail price for a 1000-gallon concrete septic tank is $1062.55.

What is the most common septic tank size?

Answer:It is a 1000 gallon septic tank across the United States, however it is rarely utilized as a septic tank in New Hampshire. By updating the state standards in 2012, the Department of Subsurface (DES) effectively rendered it no longer applicable as a stated tank size in New Hampshire. They are currently being utilized as a pump station, holding tank, or to increase the capacity of an existing septic system, among other things.

Is it ideal for high water table properties?

A monolithic septic tank is recommended for locations with high water tables since the seam is located at the very top of the septic tank, rather than at the bottom. Mid-seam and monolithic types of 1000 gallon septic tanks are both available from Septic Tanks Direct.

How much does a 1000 gallon concrete septic tank weigh?

Answer:Our 1000 gallon tanks weigh around 8,600 lbs, although the weight of precast tanks varies significantly across manufacturers based on the specifications, wall thickness, floortop thickness, and rebar reinforcement used in the construction.

How deep is a 1000 gallon septic tank?

Septic tanks made of concrete are generally 4′ 8″ deep and hold 1,000 gallons of water.

How many bedrooms does a 1000 gallon septic tank support?

Answer:In New Hampshire, the minimum need used to be many, then two, and currently a 1250 gallon septic tank is the bare essential. In New Hampshire, a 1000-gallon tank is currently often utilized as a holding tank or pump station, or to increase the capacity of an existing septic system.

Can you drive over a 1000 gallon septic tank?

It is determined by the design rating. We make it in three different configurations: H-10 is designed for pedestrian activity and has a live load of 300 pounds per square foot plus a burial depth of 3 feet. HD is intended for burial depths up to 5 feet. H-20 is designed for drive-over traffic and burial depths up to 6 feet.

1000 Gallon Septic Tank Dimensions, Features/Details*

  • In two-bedroom installations, a 1000-gallon septic tank is utilized. This structure is frequently used as a pump station. For many years, the standard size in New Hampshire was the same as the standard size in Maine. This is the smallest size that may be used as a grease trap and is suggested for this application. It is shipped pre-assembled to make installation as simple as possible

* Standards for the state of New Hampshire are displayed; click here for information on other states’ specifications. You might also be interested in these widely used precast concrete septic tanks if you like what you see.

  • Septic Tanks: Precast Concrete Septic Tank – 1250 Gallons
  • Precast Concrete Septic Tank – 1250 Gallons Monolithic
  • Precast Concrete Septic Tank – 1500 Gallons Monolithic
  • Precast Concrete Septic Tank – 1600 Gallons
  • Precast Concrete Septic Tank – 1600 Gallons Monolithic
  • Precast Concrete Septic Tank – 2000 Gallons
  • Precast Concrete Septic Tank – 2000 Gallons Monolithic
  • Precast Concrete Septic Tank – 1025

a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.

Together with my brother Matthew, I am now the sole owner of our family-owned precast concrete firm, and we have used all we’ve learned from our father to launch the next generation of our family-owned precast concrete company.

Texas Precast

WeDoNotDeliverWeDoNotInstallAerobic SepticsWeDoNotDeliverWeDoNotInstall

1000 – 1500 GPD Jet Aerobic Tank Package

Per day, it is capable of treating up to 1000 gallons of domestic wastewater. Pump tank with a capacity of 1000 gallons is included. Trash tank, Jet Aerator, Control Box, Water Pump, 3 Sprinklers, and Chlorine Tube are all included in the price.

Inlet Bottom 57″H
Outlet Bottom 54″H
Dimensions 120″L x 60″W x 70″H
Price $6,721.00
ONE COMPLETE JET AEROBIC PACKAGE LEFT
  • Riser extension with lid for the aerator
  • 1,000 gallon pump tank with lid
  • Total weight of 16,000-18,000 pounds
  • Jet aerator with control box. Pump for water
  • Three floats, a chlorine tube with eight to eighteen tabs
  • With lid, aerator riser can be used. Risers (at an additional expense if the garbage tank is deep)
  • Three spray heads
  • Three 4″ clamps

Jet Aerator Tank Lids

For either conventional or aerobic exercise. 12,000 pound

Inlet Bottom 51″H
Outlet Bottom 49″H
Dimensions 115″L x 60″W x 60″H
Price $750.00

500 Gallon Round Septic Tank (High/Low Holes)1

The holes in this tank are both high and low in elevation.

Inlet Bottom 51″H
Outlet Bottom 46″H
Dimensions 64″D x 61″H
Price $395.00

500 Gallon Round Septic Tank (2 Low Holes)2

There are two low holes in this tank.

Inlet Bottom 46″H
Outlet Bottom 46″H
Dimensions 64″D x 61″H
Price $395.00

300 Gallon Square Septic Tank

Applications include septic tank and pump tank construction.

Inlet Bottom 51″H
Dimensions 115″L x 60″W x 60″H
Price $795.00

Concrete Risers

Dimensions 23″OD x 18″W x 9″H
Dimensions 23″OD x 18″W x 12″H
Dimensions 23″OD x 18″W x 15″H
Price $50.00

Water Well Risers (includes Lid)

Lids for 18″ Poly Risers, which are designed to fit inside 18″ Poly Risers

Flat Tank Lids / Stepping Stones

It is also possible to utilize them as stepping stones.

Sprinkler Head Covers

The diagonal slopes are 3″ on both sides when there are two (2) holes on top.

Round Concrete Lids

Dimensions 64″D x 3″H
Dimensions 68″D x 3″H
Price $195.00

A/C Pads

Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years.

  • Waste flow, home size, square footage, number of bedrooms, number of bathrooms, and a few other factors are taken into consideration in septic tank size recommendations and charts.
  • Septic tanks are available in a variety of sizes, and you can even obtain tanks that are smaller than 1000 gallons; however, we recommend that you go with a tank that is at least 1000 square feet in size.
  • Consult with a licensed expert before purchasing or installing any equipment if you’re going to install a new septic tank or septic system for the first time.
  • ” A few of states are now requiring 1000 gallon tanks as the minimum size requirement.

The popularity of the concrete septic tank can be attributed to its strength, weight, and longevity. For more precise information on durability, concrete septic tanks that are correctly constructed have a lesser probability of breaking, cracking, or floating.

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.

Heavy Duty Options

Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.

Installation Requirements

Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different.

Lifespan and Durability

The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.

See also:  What Is The Basement Drain To Septic Tank In House Called? (TOP 5 Tips)

1250 Gallon Concrete Septic Tank

Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

In addition, many of these bigger tank sizes are so massive that rebar and wire mesh are required within the walls and between layers to provide additional strength, stability, and durability.

1500 Gallon Concrete Septic Tank

Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:

  • In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflow of effluent might cause problems by mistakenly combining the settled solid waste with oils, scum, and effluent. Make sure no sewage gases are allowed to enter the sewer line. These gases have the potential to infiltrate back into a home or structure, generating a foul odor.

Outlet Baffles

In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflowing effluent might cause problems by mistakenly mixing the settled solid waste with oils, scum, and effluent. Stop the entry of sewage gases into the sewer system. A foul odor might infiltrate back into a home or structure when these gases are released.

  • Preserving the septic tank by keeping scum, oils, and solid waste contained inside
  • It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.

Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.

As a result, it’s important to contact with a septic installation specialist before making a final decision on a certain material. The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.

Float

Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.

If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.

Jensen Precast – Fontana – Septic & Wastewater Systems

Founded in 1968, Jensen Precast has been manufacturing septic tanks. With over 30 years of experience in the septic tank industry, we are the leading producer in Western United States. Septic tanks are the first and most important component of a comprehensive onsite wastewater treatment system. When utilized in conjunction with one of the various treatment and dispersion options available, the septic tank may be considered a comprehensive onsite wastewater treatment system. When you choose a Jensen Precast Septic Tank, you will receive the following benefits: Strength and Structural Integrity – All Jensen Precast septic tanks are engineered by Professional Civil and Structural Engineers to withstand the anticipated loading conditions.

  • In accordance with the National Precast Concrete Association’s Plant Certification Program, our production operations are subjected to extensive and comprehensive quality control methods during the manufacturing process.
  • Acceptance by the Uniform Plumbing Code (UPC)- Jensen Precast septic tanks are listed in the Uniform Plumbing Code (UPC), which was issued by the International Association of Plumbing and Mechanical Officials (IAPMO).
  • Designed and produced in line with the strict and extensive criteria of this national standard, Jensen Precast septic tanks meet or exceed the standards of this standard.
  • We maintain a large inventory of septic tanks on hand, allowing us to provide quick delivery to any location within our service region.
  • Grease interceptors from Jensen Precast are available in any size and capacity that is necessary.
  • The addition of a few simple and cost-effective accessories to your septic tank can allow you to drastically reduce your long-term expenses of ownership.
  • The installation of an effluent filter in a septic tank is a cost-effective and easy way to increase the life and efficacy of any treatment system while also reducing maintenance costs.
  • Carbon filters are good at reducing the smells emitted by sewage gas vents.
  • System for Treatment and Disposal – Jensen Precast is a full-line supplier of a wide range of septic tank treatment systems as well as associated parts, components, and accessories.

Pumps, control panels, sand filters, AdvanTex textile treatment systems, and a variety of other products are available.

Plastic Vs. Concrete Septic Tank

Plastic and concrete septic tank alternatives are available whether you’re installing a new septic tank or replacing an existing one, and you’ve probably seen them before. For the most part, homeowners are not overjoyed at the notion of shelling out a significant sum of money for something that essentially does nothing but handle wastewater. Although this is a significant commitment, it is not one that should be taken carelessly. They both have advantages and disadvantages, and we hope that this list will assist you in making a more informed selection.

Plastic Septic Tanks

Increasingly popular as an alternative to concrete septic tanks are plastic septic tanks. Typically, they are pre-fabricated and have an oblong oval form with ridges running around the exterior walls. They are readily available at most home improvement stores and are ready to be installed as soon as they are delivered to your residence.

Pros

They are rather light in weight due to the fact that they are composed of plastic. They typically weigh a couple hundred pounds and can be handled with relative ease by a standard pickup truck. This means that not only is installation simpler, but it also means that all of the expenditures involved with it are reduced. Simply digging a hole, positioning the tank, and connecting the tank to the rest of your system is all that is necessary. Plastic septic tanks are a more affordable option to concrete septic tanks due to the fact that they are lighter and easier to install.

Cons

Compared to concrete septic tanks, plastic septic tanks are significantly weaker. In other words, driving anything over the tank may cause it to be crushed or otherwise damaged. Plastic septic tanks are also more susceptible to environmental variables such as soil vibrations and root penetration, which can cause cracking or warping of the tank’s outside. It is possible to fix some of the damage, but depending on how severe it is, the tank may need to be replaced entirely. In order to function correctly, septic tanks must have an adequate balance of sludge (solids), effluent (water), and scum (lightweight solids) in their contents.

If too much waste accumulates inside the tank, it can cause your system to overflow and the tank to “float” to the surface of the earth, causing damage to the plumbing lines in the surrounding area.

You will need to get them cleaned on a more frequent basis in order to prevent accumulation in the system.

Concrete Septic Tanks

Septic tanks made of concrete are a more conventional alternative. You have the option of either having a pre-cast concrete septic tank supplied to your home or having a tank put in place on your property.

As soon as the prepared option is delivered, it is ready to be implemented immediately. In order to use the poured in place method, you must first dig the hole and then create a mold to shape your tank.

Pros

Concrete sewage tanks, in contrast to plastic septic tanks, are extremely long-lasting. Typically, they may be driven over without causing any damage. However, this is not true for your plumbing lines that run to or from the tank, therefore you must use caution when driving in this area of the city. Because concrete septic tanks are massive, they are capable of handling large volumes of sewage without experiencing any issues. This implies that they require less care and cleaning than plastic and can last longer between cleanings.

Cons

One of the most significant disadvantages of a concrete septic tank is the weight of the tank. They can weigh many tons, depending on the size of the house you need to build. With this amount of weight, it is evident that large machinery is required for transportation and installation, increasing the entire cost. Environmental variables such as soil vibrations and root penetration are less likely to cause damage to concrete septic tanks than are other types of septic tanks. They are, on the other hand, more difficult to repair than plastic tanks if they are damaged or broken.

See also:  How Much To.Charge To Empty Septic Tank? (TOP 5 Tips)

There are a variety of criteria that go into selecting which system is the greatest fit for you.

Posts from the recent past

Concrete Septic Tanks

You are currently browsing the archives for the category “Concrete Septic Tanks.” Concrete septic tanks and septic systems, which are utilized in residential, commercial, and industrial applications, are the most widely used form of on-site wastewater treatment system in the United States. In the United States, approximately 20% of all new house building utilizes septic tanks and septic systems for wastewater treatment and disposal. Concrete septic tanks, as opposed to steel or high-density polyethylene septic tanks, gradually strengthen with use and are able to handle harsh load conditions while exhibiting minimal susceptibility to damage during backfilling and excavation.

Ground water and surface water are protected from contamination by our concrete septic tanks and septic systems, which are non-toxic and long-lasting, safeguarding ground water and surface water during application and usage.

This allows for a longer exit flow time, which reduces velocity, allowing for longer exit flow time and reduced velocity.

Preparation of the Excavation SiteOur delivery equipment must be able to access the excavation. The excavation’s bottom must be dry, level, and supported by a base of gravel or other appropriate material that has been compacted to withstand the projected stresses.

1000 Regular

Regular septic tanks (model 1000) are the wastewater standard for the vast majority of residences. Featuring an integrated concrete input baffle as well as a Polylok PL-122 effluent filter with the industry’s first shut-off ball, this unit is a game changer.

Specifications:
  • The design of the septic tank is monolithic
  • The concrete is 4000 psi and set in 28 days
  • The rebar is structural fiber grade-60. Precast concrete with air entrained in it: 6 percent (+-1 percent)
  • Tank penetrations with rubber boots that are integrally cast
  • Designed for non-traffic loading applications. Fill depths range from 0 to 36 inches
  • Vacuum testing is offered for an extra fee.

The 1000 Regular septic tank is the wastewater standard for most residences, and it stores 1000 gallons of wastewater. Featuring an integrated concrete intake baffle as well as a Polylok PL-122/a>u00a0effluent filter with the industry’s first shut-off ball, this system is a must-have.

rn

Specifications:

rn

  • Septic tank design with integrally cast tank penetrations and rubber boots. 4000 psi concrete at 28 days. Reinforced with structural fibersamp
  • Grade-60 rebar. 6 percent (+-1 percent) air-entrained precast concrete. Vacuum testing is offered for an extra fee and may be done at any depth between 0 and 36 inches.rn The following are the attributes of the product:, description short:, available now:, available later:, id product27, out of stock:0, new:0, id product attribute:185, quantity wanted:1, extraContent:, allow oosp:true, category: septic-systems, category name: Septic Systems, link:, attribute price:0, price tax ex pricing parameters: 0
  • Customizations: 0
  • Rate: 0
  • Tax name: 0
  • Ecotax rate: 0
  • Attributes comma lists: 0
  • Attributes simple: 0
  • Unit price: 0
  • Customizations: 0
  • Is customizable: false
  • Show quantities: false
  • Quantity label: Item
  • Customer group discount:0
  • Title, 1000
  • Imagery on a regular basis:] The following are the defaults for the cart and the home page. The following are the defaults for the medium and the big page. The following are the defaults for the cart and the large page. id image: 52, position: 1, associatedVariants:, has discount:false, discount type:null, discount percentage:null, discount percentage absolute:null, price amount:0, regular price amount:0, regular price: $0.00, discount to display: $0.00, unit price full:, show availability:fals

Data sheet

Dimensions: 9 590 pounds; capacity: 1 000 gallon Exterior Dimensions64″ H x 5′-4″ W x 8′-0″ LInvert Out51 1/2″ Exterior Dimensions64″ H x 5′-4″ W x 8′-0″

Specific References

What kind of septic tanks does Winchester Precast offer for purchase?

  • Winchester Precast is a company located just outside of Winchester, Virginia that sells precast concrete septic tanks. Mid-seam tanks are available in capacities of 750, 1000, 1250, and 1500 gallons. Our top-seam tanks are available in capacities of 1000, 1250, and 1500 gallons. As well as alternate tank systems such as EZ-Treat and MicroFAST tanks, we also have distribution boxes, well casings, plastic risers, and plastic lids with an internal diameter of 24″. For more information on our products, please see our septic tanks page. If you have any concerns regarding our tanks or would want to place an order, please contact us at (540) 667-2301.
  • Our septic tanks are vacuum-tested to ensure they meet Loudoun County regulations before being shipped out of the yard. We do not sell fiberglass or metal septic tanks at this time. See the question below for more information on why we recommend that homeowners and consumers use precast concrete septic systems.

What is the expected lifespan of a septic tank system?

  • Septic tanks should survive for many years, if not decades, if they are maintained regularly. Taking note of any bad odors, moist areas in the drain field, or slow-draining toilets can help you catch problems before they become a full-blown septic tank disaster. It is possible that the tank’s life expectancy will be reduced owing to degradation or structural difficulties depending on the quality and kind of material used to construct it (concrete, fiberglass, steel). Acidic soil might also cause septic tanks to fail sooner than expected. Make certain to investigate which form of substance would be the most appropriate for your septic tank requirements. Throughout the country, concrete tanks are the industry norm.

What size septic tank do I need to purchase?

  • The size of your septic tank is determined by the number of bedrooms and people in your home, as well as the number of appliances in use at the time, such as dishwashers, trash disposals, and washing machines, among others. Generally speaking, a minimum of 1000 gallons is required for 1-3 bedrooms, a minimum of 1250 gallons is required for 4 bedrooms, and a minimum of 1500 gallons is required for 5+ bedrooms. The temperature and scenery of your place of residence may also play a role in determining the size and kind of tank that you should install. Check with a septic tank specialist to learn about your alternatives
  • The lowest price upfront may not always be the greatest long-term solution.

What is the cost of a septic tank installation?

  • Concrete septic tanks, without installation and accessories, can cost anywhere from $1200 to $5,000, depending on the size and type needed by county or local regulations, among other factors. Steel or plastic tanks may be less expensive in the short term, but there are extra factors such as anchoring and specific backfill that may raise the cost of the tank during the installation process. Installing a new system should be handled by an experienced professional.

In what manner should my septic tank be checked on a regular basis?

  • It is advised that you get your septic tank examined every 1 to 3 years, depending on how many people reside in the property, to verify that everything is operating correctly. Alternative septic tank systems in the Virginia counties of Loudoun, Prince William, Fauquier, Stafford, Fairfax, and Spotsylvania must be examined on a yearly basis to avoid fines. Every year, the city of Loudoun requires alternative tanks to be examined by the first of July.

What is the proper way to examine a septic tank?

  • It is recommended that you have your septic tank examined by a professional. Most local health departments have this information listed online or available via phone, and you can typically find it at your local health department. Unless your septic tank is equipped with a riser, the inspector will have to dig out the tank in order to inspect it. Winchester Precast provides septic tanks that are built to the specifications of Loudoun County, with designs that incorporate one or two risers, which would allow examination of the tank without the need to dig it out.

How frequently should I pump the septic tank at my home or business?

  • A septic tank that has been properly maintained should be pumped every 3-5 years. Make a point of not flushing oils or extra food waste down the garbage disposal. To avoid clogging pipes and causing a failure of the toilet, do not flush cigarettes, wipes, cat litter, sanitary goods, coffee grounds or cotton swabs down the toilet. Maintenance should be performed on a regular basis. If you are considering purchasing a house that incorporates a septic tank system, make sure to obtain the seller’s septic maintenance information.

Is it safe to use Drano to unclog the pipes in my home?

  • Drano is a harsh chemical that can have a detrimental influence on the beneficial microorganisms that your septic tank need in order to function correctly. When it comes to clogged drains and showers, a solution made up of equal parts baking soda and vinegar and hot water is the most effective option. The use of a plunger or a drain snake after applying the baking soda/vinegar mix may also be beneficial in breaking up the clog. Drano should only be used in extreme circumstances, if at all

What is a distribution box, and how does it work?

  • A distribution box is a box with multiple openings for pipes that allows water from the septic tank to be distributed uniformly onto the drain field. The number of holes in your septic system is determined by the demands of your system. Winchester Precast manufactures narrow and broad distribution boxes with a variety of holes to meet the requirements of the Commonwealth of Virginia. Obtain information from your septic service provider about the number of holes your distribution box requires if you are intending to update or replace your current one. In the case that the distribution box or lid is required, Winchester Precast can offer them separately. Loudoun County requires all distribution boxes to be wide and covered with a specific coating in order to avoid microbially-induced corrosion (MIC). The pre-coated boxes are provided by Winchester Precast, and we also supply spray bottles for treating uncoated boxes that have already been fitted. Despite the fact that Loudoun County is the only one in Virginia that needs this coating at this time, some homeowners and septic service providers are opting to purchase coated d-boxes in other counties in order to avoid MIC
  • However, this is not required by law.

What is a drain field, and how does it work?

  • A drain field is a section of your yard where water from your septic tank is dispersed into the soil through pipes and drainage systems. Drain fields are also referred to as leach fields or absorption beds in some circles. In the septic tank system, the drain field is a very important component. The most expensive septic repairs are those required in the event of a blocked or failing drain field. Have a professional inspect your tank and ask questions about your drain field if your toilet is clogging. This will guarantee that there isn’t a significant problem with your system.

Is it permissible for me to have landscaping or cattle on the drain field?

  • Grasses are an excellent choice for covering the drain field. Plant trees or big bushes at least 30 feet away from the drain field, as the roots of these plants can cause damage to the pipe and drainage system. Away from the drain field, plant vegetable or herb gardens to avoid possible sewage contamination or oversaturation of the soil. Livestock should be kept away from the drain field because they will trample and compact the soil, impairing the soil’s ability to exchange oxygen, which is a necessary part of maintaining a functional drain field. Stormwater runoff and water troughs should be maintained away from the drain field in order to avoid oversaturating the soil.

Leave a Comment

Your email address will not be published. Required fields are marked *