Sprinkle the drain with baking soda, then dump vinegar into the pipe. Leave the mixture to sit in the pipe for an hour or two. Finally, flush the drain with hot water. If the clog is small, this could be enough to clear the pipe.
What can I use to unclog my septic tank?
Dump a couple of teaspoons of baking soda into your clogged drain, followed by one half cup of vinegar. This will create a fizzing action that may cause a fizz-like eruption. This is normal. This fizzing action may help to break the clog up and get things moving in your drain once again.
How do I know if my septic line is clogged?
Signs of Septic System Clogging: Water and sewage from toilets, drains and sinks backing up into your home. Bathtubs, showers, and sinks draining slowly. Gurgling sounds present in the plumbing system. Bad odors coming from the septic tank or drain field.
Can I use Drano if I have a septic tank?
Will Drano® products harm my septic system? No, all Drano® products are septic safe drain cleaners and will not upset the bacterial action in septic systems. Use Drano® Max Build-Up Remover on a monthly basis to replenish the bacteria in the septic system that help break down toilet paper and organic matter in pipes.
Can I shower if my septic tank is full?
Unless the toilet’s overflowing or the bath spigot is filling the tub with blood, plumbers and exorcists aren’t usually on our minds. When the waste water from your toilet, shower, sinks and washing machine leave your house, it’s combined. When it hits the septic tank, however, it begins to separate.
What will ruin a septic system?
Substances like motor oil, paints, varnishes, and floor wax will damage organisms in your tank. This bacterium is necessary to keep your soil and groundwater free from pathogens. Instead of putting these oils down the drain, refer to your city’s waste management for recommended guidelines to dispose of these chemicals.
What is the average life of a septic system?
Age of the System It’s pretty common for a septic system to last 40 years or longer, which means if you buy a new home, you might never need to replace it. However, you might have an older home whose septic system has been in place for nearly half a century.
Can you use Liquid Plumr in a septic system?
Yes. It’s safe to use Liquid-Plumr ® products if you have a septic system. The ingredients degrade rapidly and will not harm the bacteria in your tank.
How do you dissolve sludge in a septic tank?
How to Reduce Sludge in a Septic Tank Without Pumping
- Install an aeration system with diffused air in your septic tank.
- Break up any compacted sludge.
- Add a bio-activator or microbe blend.
- Maintain the aeration system.
- Add additional Microbes as required.
Are dead animals good for septic tanks?
This is false. Rotting meat just adds unnecessary and foreign bacteria to your septic tank. At best, this will do nothing. At worst, bones and fur from a dead animal will clog up your system.
What are the do’s and don’ts of a septic tank?
DON’T flush material that will not easily decompose, such as hair, diapers, cigarette butts, matches, or feminine hygiene products. DO conserve water to avoid overloading the system. They kill the bacteria needed to decompose wastes in the septic tank and drain field. DO use substitutes for household hazardous waste.
How to Unclog Your Septic Tank
Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.
Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!
- 1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.
- Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
- However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.
- Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.
- If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.
- Advertisement
- s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.
- Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.
- 4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.
- If at all possible, take a shower or bath as soon as possible after working on your septic tank
- When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.
- 5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.
- Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.
- 6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.
- Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.
- In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.
- If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.
- 2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.
- It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price
- 3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.
- It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.
- 4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it
- If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.
- Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.
- It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.
- 6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished
- Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.
- 7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement
- 1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
- Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.
- Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.
- As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank
- 2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.
- It will also save you money on your utility bills if you keep your water consumption to a minimum.
- 3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.
- Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.
- 4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping
- Not every septic system will have an effluent filter
- Check your filter any time you have your tank pumped or inspected so it’s less likely to clog
- 5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement
Create a new question
- Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
- Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty
- Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
- They are available.
Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement
- Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.
Advertisement
Things You’ll Need
- Hose
- Paper towel
- Mechanical auger
- Safety glasses
- Work gloves
About This Article
The writers of this page have together authored a page that has been read 314,219 times.
Did this article help you?
- Plumbing
- Unclogging
- Septic Tank
- Blocked
- Septic System
- Pipes and Drains
- How to Plumbing
A few methods for unclogging a septic tank drain, as well as suggestions for speeding up a slow drain, difficulties that may arise while unclogging a drain, and preventative steps to avoid blocked septic tanks and drains will be discussed in this article. As well as how to unclog a septic tank and strategies to handle typical septic problems that may arise as a consequence of a full septic tank or clogged septic lines, this article will teach you how to unclog a septic tank. Your kitchen sink drain or bathtub drain is attached to a specific branch line and drains at a slower rate than usual because of this.
Reasons for a clogged bath or kitchen drain:
- Dumping food or solid stuff down the drains is prohibited. Putting oil or other sticky substances into the kitchen sink
- Dumping chemicals or paints down the drains is not acceptable. Hair down the drains of the bathtub and shower
- Ventilation that is improper and/or insufficient Drainage system that is clogged Septic intake or outlet that is clogged
Common Causes of Clogged Drains
Many various things may cause your kitchen sink drain or bathroom drains to get clogged, but the most typical reasons of clogged drains are still leftover food and grease from the kitchen that is poured down the kitchen sink, as well as hair that is flushed down the bathtub and shower drain. Another typical reason of clogged drains is the buildup of paints and other chemicals inside the drain pipe, which solidify and block the line. In many cases, you will be able to unclog a blocked kitchen sink or a clogged bathtub drain on your own.
Ways to unclog a drain:
- Baking soda and vinegar drain unclogging is an alternate and more natural method of unclogging a clog in the drain. Vinegar and baking soda have no negative impact on the environment. A plunger can be used to clear a clogged drain. This method will work for clogs of modest size and will not cost you much money. If the obstruction continues, consult with a professional. Although it is more expensive, unclogging a drain with a cable or auger may be quite successful in removing solid obstructions in the drain and even breaking through thick roots
- Yet, it is also more efficient. Pouring paint or other sticky and oily materials down the drain can produce blockages, and high-pressure water jetting is more successful at clearing them.
Before you begin utilizing high-pressure water jetting to unclog your drain, be sure that your pipes are capable of withstanding the high pressure that will be applied by the high-pressure jet. Otherwise, the high pressure will rip your pipes apart. Hydro jetting is best left to the professionals, such as your local plumbers.
Ways to avoid clogged drains and a full septic tank:
- Avoid blocking your sink drain by pouring solid objects or oily stuff down it. Cover the drains in your toilet and kitchen with filters to protect hair and solid things from entering the drain system. Make certain that suitable numbers of air vents are provided, and that the diameters of the vents are acceptable for all of your fixtures.
Problem II: All of your home’s drainage lines are sluggish to drain, and the drain water from the main drainage line is backed up in a pool.
Possible causes for a slow drain:
- An obstruction has formed in a section of the main drain line
- An obstruction has formed at the drain intake or outflow of the septic tank. A section of the percolation pipes has become jammed
- The septic tank vent has become obstructed. Low temperatures have caused the sewage tank or septic vents to become iced over
- One of the distribution boxes has been blocked off
Ways to unclog a main drain or full septic tank:
- To unclog the main drain line, use a snake or high-pressure water jetting. This is the work of a professional. By virtue of his knowledge and experience, he can snake a sluggish drain, determine if the blockage is caused by solid waste, oily substances, or roots, and apply the most appropriate procedure to unclog the drain. Verify that there is no blockage at the entrance or exit of the septic tank owing to solid wastes or scum, among other things. Check the distribution box, which is placed between the septic tank and the percolators, for easy flow once the block has been removed. If there are any obstacles, they should be removed. Check the region around the percolators for any problems. Check to see whether the area is damp, marshy, or smelly. It indicates that the percolation process is not working properly. Another type of work is where the earth is not absorbing the drain water at the same pace as it is being discharged. It might be because your water use has increased recently as a result of the increased number of guests, or it could be because the soil has been saturated as a result of moisture from other sources such as rainfall (which has been above average), or both. If your septic tank has frozen due to inclement weather, call an expert right away
- If your septic tank has frozen due to inclement weather, call an expert right away. Use the septic tank as a storage tank until the tank has completely thawed on its own if you can’t find a professional or the tools you need to do the job. You will be able to hang on for a longer period of time if you make wise use of water. Winterizing the septic tank before the following winter will help to prevent it from freezing in the future.
Preventive measures to avoid a blocked main or slow drain:
- Please be considerate of your septic tank. It is intended solely for the disposal of organic waste materials. Avoid depositing non-biodegradable and inorganic garbage in landfills. They will very certainly overflow a septic tank and interfere with the regular operation of the septic tank. Use drain filters in your toilet and kitchen to catch hair and solid things that are flowing down the drain. In order to avoid the septic tank from freezing in the winter, it should be winterized. If you are considering a lengthy trip, you should empty your septic tank and seek professional assistance. Winterization is dependent on the area and weather conditions. A simple investment here will spare you from all of the difficulties you may face throughout the winter.
External References
- Natural ways to unclog a drain include the use of vinegar, baking soda, and water (theGoodHuman.com), among others. On eHow.com, you can learn how to unclog a sink naturally.
Related articles:
A septic system is a wastewater treatment system that is self-contained and located underground. This type of system is most commonly used in rural regions since the distance between households is so great that centralized sewer systems are not particularly cost effective in these places. They are used to dispose of domestic garbage on-site, and because of their basic design, they are less expensive to install and maintain than other methods. As a matter of fact, they are typically built in a homeowner’s backyard, and as a result, they do not necessitate the use of sewage lines, resulting in them being less harmful to the environment.
- Wastewater from the residence is sent down the sewage line and into the septic tank, where it remains.
- There are three layers of wastewater that form inside the tank: solids that are lighter than water (e.g.
- The sludge and scum layers stay in the tank, where bacteria that are naturally found in wastewater break down the particles and remove them from the system.
- In this case, the cleared liquid flows from the tank to the drainfield or distribution device, as previously stated.
- This consists of a succession of trenches or a single bed coated with gravel or course sand that is buried one to three feet below the surface of the ground and is connected to the main sewer line.
- Another benefit of having a drainfield is that it treats wastewater by allowing it to flow from the pipes into the gravel and then further down into the ground.
In some worlds, the gravel and dirt act as biological filters to purify the water. Despite the fact that this approach is successful, it is prone to failure (particularly if not much attention is being paid to it). The following are indications that your system is experiencing difficulties:
- Overflowing toilets on a consistent basis
- It is the drains that are making these strange gurgling sounds. When you empty a sink, the water will back up into the shower or bathtub. You will see that there is an overflow where your washing machine is positioned. If foul odors pervade the air or garbage is visible on the ground, it is time to act. Your drains are emitting an unpleasant odor
- Your toilets flush at an inordinately slow rate
- Streams and ditches in the vicinity get contaminated as a result. You’ll see dips in the earth around the soakway drain or the septic tank
- These are called septic tank dips.
How to Solve a Septic Tank Clogging Problem
There will be times when you have septic tank problems, but you will not always have to dig up your tank or drainfield to remedy the problem. When you dig up your septic tank, the last thing you want is for your yard to become a mucky mess that will take days to clean up once you have finished digging. Following that, here are some suggestions to assist you in unclogging your septic tank: 1: Determine what is causing the blockage to occur. As previously said, you do not always have to dig out your tank when you have a clog in your toilet.
- In reality, the problem may just be a buildup of debris that has accumulated through time and has to be removed.
- They can utilize technology to establish whether or not there is a problem with your system in the first instance.
- If your problem is not mechanical in nature, you will not require the use of any of those equipment to resolve it.
- It is possible to unblock obstructions using bacteria since it behaves like an acid.
- Sludge will be released by adding chemicals to the mix, but this will also allow the sludge to enter your system, making the situation more worse.
- You may search online for bacteria merchants who are willing to sell to you.
- Why should this be the case?
- 4: Allow bacteria to do its work.
- This is due to the fact that you have no way of knowing how much sludge you have in your tank, as well as in your lines and field.
- It is common for bacteria to be chosen as the remedy of choice because they are organic and will not affect systems in the same manner that chemicals would do.
Reducing the Clogging of Septic Tanks
Maintenance is always essential in ensuring that you do not suffer as a result of a clogged septic tank.
Yes, sludge accumulates over time, but taking proper care of your system now will save you a lot of hassle in the future. Although it is advised that you get your tanks cleaned out once a year, the frequency with which you do so is determined by the following factors:
- The number of people that live in your house
- The size of your home. The quantity of wastewater produced (the amount created is, of course, based on the number of people living in your household)
- And The amount of particles present in the wastewater (for example, the use of a garbage disposal influences the amount of solids present in the wastewater)
It is not necessary to do routine maintenance on your septic tank’s absorption field. Nevertheless, this does not imply that you should take it for granted. Fortunately, there are certain things you can do to ensure that it is always working and protected.
- Do not drive automobiles, trucks, or heavy equipment through the field. Do not grow trees or bushes in a field since the roots of these plants can get into the irrigation system and cause a blockage. Don’t use hard surfaces to cover the playing field (concrete, asphalt, etc). Grass is the most effective ingredient to employ if you want to provide shelter since it prevents erosion and drains excess water. Surface runoff water from roads, rooftops, patios, and other locations should not be diverted back into the fields.
How to Clear a Clogged Septic Line
If you have ever had to deal with a clogged drain, you are aware that the cleanup procedure is anything but enjoyable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.
Symptoms of a Clogged Drain
In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.
2. Water Going the Wrong Way
Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.
It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.
Tips for Clearing a Clogged Drain
Before you call a septic company, there are a few things you may do to try to unclog your drain on your own that may be successful.
1. Avoid cleaners with chemicals
Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.
2. Pour hot water down the drain.
The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.
3. Use baking soda and vinegar.
If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.
Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area.
Septic systems are something we are very familiar with, and we can handle just about any septic problem, including a clogged drain or septic line, thanks to our 40 years of experience. If you have any reason to believe that there is an issue with your system, please contact us.
who should you call for septic issues?
Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.
Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.
How to Get Rid of Septic Tank Clogs
That feeling you get after flushing the toilet and nothing comes out is wonderful, isn’t it? It might be amusing to hear your toilet gurgle or to hear the water flowing continually, but it can also be frightening to hear the water level climb as you watch it. It’s an unpleasant situation, not to mention that it necessitates a great deal of hard effort and elbow grease in the process of plunging and cleaning up the subsequent mess. When anything gets stuck in your pipe or your toilet makes a mistake, you may have blockages and backups.
- Clogs can form inside your septic tank from time to time, causing blockages in the tank and drainage troubles to arise.
- What if we told you that you could fix it yourself?
- While bringing in a professional may be required in certain cases, there are several things you may do to resolve the situation without calling for assistance right immediately.
- In your search for solutions to unclog your septic tank, you may want to try things like slowly pouring hot water down the drain or pouring vinegar down your drains to break up obstructions, to name a few possibilities.
- In order to clear blockages from your drain, you may need to use a professional drain cleaner that you pour down the drain.
- However, although these chemical cleaners will eat away at obstructions, they will also kill off beneficial bacteria in your tank, disrupting the delicate bacterial balance in your tank.
- Yes, the nasty bacteria will die off, but the healthy bacteria will also die off.
With regard to drain cleaners, the best option is to select one that has concentrated bacteria and enzymes that will eat away at the dangerous bacteria and materials in your tank while simultaneously boosting the amount of helpful bacteria and enzymes in your tank.
In the case of trying to rehabilitate your septic system, using a product such asSeptic Blastcan be really beneficial.
After that, the product will begin to gently eat away at the obstructions in your tank, therefore it’s vital to be patient throughout this process.
It is possible that you may need to repeat this method every day for several days in a succession before the blockage is completely removed.
Your septic tank has now been cleansed and returned to its original level of functionality.
Fortunately, here at Green Gobbler, we provide excellent alternatives to harsh chemicals and maintenance supplies, allowing you to address your problems while minimizing the impact on the environment and your plumbing system. Choose Septic Blast to do the task right away!
How to unclog your leach field
A SHOCK TREATMENT CAN SAVE YOU UP TO $150. The leach field, also known as a drain field, is the area where effluent from the septic tank is disposed of. In this stage of the septic system, a network of perforated PVC drain pipes, crushed stone, and a layer of unsaturated soil are combined to form a septic system. Gravity is typically responsible for the movement of wastewater from the septic tank to the leaching bed. Nevertheless, when the conditions do not permit the use of gravity to transport the wastewater to the leaching bed, a pumping station can be utilized to transport the wastewater to the leaching bed.
Final filtering is carried out by the presence of bacteria and other microorganisms that further purify the wastewater before it reaches the groundwater table.
It does, however, become clogged from time to time.
How is a leach field made?
It is critical that the leaching bed functions well in the wastewater treatment system, and if it does not, the entire system will be adversely affected. It is also critical to prevent structural problems from occurring in the first place by ensuring that the building is designed correctly. As a result, only fully licensed contractors are permitted to do such a project. But, first and foremost, you will need to conduct a percolation test as well as a comprehensive review by an engineering professional.
A quick percolation rate is seen in sandy soils; whereas, a sluggish percolation rate is found in clay soils.
In order for a soil to be considered excellent, its percolation rate should not be too high or too low.
If, on the other hand, it takes more than an hour for the water to settle, this indicates that the effluent is not infiltrating quickly enough, which might result in backflow difficulties.
Steps followed when building a leach field
- The moment has come to start digging the trenches after all of the testing have been performed and the building plan has been finalized and approved by the project team. The number of trenches that will need to be built depends on the size of the septic tank and the volume of wastewater that will be released into the leaching field throughout the construction process. Each trench should have the same breadth as the others (approximately 3-4 feet). In addition, the ditches should have a modest downhill slope to them. Following the excavation of the trenches, they should be filled with crushed stone. The crushed stone bed should be at least one to one and a half inches thick and evenly distributed throughout the ditches. This procedure is critical because it enables for more effective drainage of the effluent under the perforated pipes
- Nevertheless, it is not required. The perforated pipes are then laid on top of a bed of crushed stone to allow for proper drainage. Crushed stone is then placed on top of the perforated pipes to ensure that they are securely attached — enough to prevent them from moving or getting misaligned over time. A layer of crushed stone between 1 and 3 inches thick should enough.
- Following that, a geotextile membrane is laid over the crushed stones. When the membrane is in place, soil or dirt cannot slip between the crushed stones and cause a blockage in the leaching bed. If you haven’t already, install a drain line from the septic tank to the leach field pipes. Finally, the trenches are filled with dirt to make them more level and to make the surface of the leach field more consistent in appearance. After that, you may cover the area with a covering of grass. And, at all costs, avoid planting anything else in or near this part of the yard.
How long does a septic leach field last?
Weeping beds should last at least 25 years if they are well-maintained, but they may live much longer or shorter depending on a variety of conditions. The majority of leaching fields collapse as a result of biological or hydraulic overstress. Hydraulic overload occurs when an excessive amount of water is discharged into the septic tank. Consequently, it is advised that duties such as washing be spread out throughout the course of the week rather than being completed in a single weekend session.
When an excessive amount of organic material enters the leaching field, this is referred to as biological overloading.
The only solid waste that should be disposed of in your septic system is toilet paper and human waste (feces).
Additional to this, we advocate the frequent use of biochemical additives to improve the overall efficiency and lifetime of the system. Because of the high activity of the bacterial flora in your system, Bio-Sol’sSepti +can help to avoid biological overload in your system.
What is clogging your leach field?
The leaching bed, like the septic tank, is not meant to survive indefinitely. All leaching fields will need to be replaced at some point in the future. However, with careful care and maintenance, your leaching bed should last for many years, if not for a lifetime. The leaching bed utilizes aerobic bacteria on the receiving soil to filter wastewater before it reaches the groundwater table, preventing groundwater contamination. These bacteria decompose organic materials and aid in the elimination of viruses as well as the reduction of nutrients in wastewater.
Clogging in the leaching bed, on the other hand, causes this process to be slowed down, resulting in unavoidable environmental contamination.
Biomat
During the wastewater treatment process, a black, gelatinous layer forms beneath the distribution pipes as the wastewater passes through the leach field. Rather than sludge, this layer is really a biomaterial sludge known as “biomat.” Because the biomat is waterproof, it significantly minimizes the amount of wastewater that percolates into the soil. In most cases, this biomat is formed of organic waste and anaerobic bacteria that have attached themselves to the soil or broken stone. The organic stuff in the effluent provides food for these bacteria.
- Contrary to this, it aids in the further filtering of wastewater by reducing the rate of infiltration and retaining the organic matter before the water is allowed to reach the soil.
- More black gelatinous sludge builds up in the trenches, the more difficult it will be for the wastewater to permeate and subsequently percolate into the soil as a result of the accumulation.
- As soon as sewage begins to back up, it will always flow to the spot that provides the least amount of resistance.
- When this occurs, the objective should not be to entirely remove the biomat from the environment.
- It is important to note that good care and maintenance of the system will assist in preventing such an imbalance, which will save you a great deal of headache (like having to unclog your leach field).
How do you know if your leach field is failing?
It goes without saying that the most visible indicator of a failing leaching bed is when wastewater overflows and reaches the surface. The effluent will rise to the top of the soil or, in certain situations, will pour out the end of the trenches if the receiving soil in the leaching bed is unable to absorb any more water from the receiving soil.
The most common reason for the effluent to stop flowing is due to an excessive amount of biomatis being created. Check out the following indicators to determine if you need to unclog your leach field:.
Sluggish drains and toilets
Prior to the drain field failing altogether, you may notice that water is draining through the home at a slower rate. The drains will continue to function as long as there is enough space for the water to flow. On the other hand, it is possible that the water is draining more slowly. If you neglect this problem, which is caused by the leach field, the situation will deteriorate over time and become more serious. It is possible that the septic tank will become overflowing and that the water will be unable to penetrate into the earth at all.
Septic odors
Septic tank scents might be detected in the vicinity of the leaching area or within the house itself. Another sign that the leaching field is failing is the presence of rust. Due to the fact that it is so uncomfortable, this is perhaps one of the easiest indicators to recognize. To determine if you are experiencing the rotten egg smell, first check to see if there has been a buildup of organic material in the plumbing system. You may either use an ecologically friendly drain cleaner (such as SeptiDrain) or check your septic tank for abnormally high water levels to resolve the problem.
Sewage backing up in the house
In the case of clogged septic fields, water is returned to them, which causes the water level in the septic tank to rise. Water will back up through the hole in the septic tank or into your home if there isn’t enough room left in the tank. The leach field in your septic tank is almost certain to be the source of the problem if you see an excessively high water level in the tank. The water level in the septic tank should always be at or below the level of the drain pipe that connects the tank to the leaching field.
It is thus required to determine whether the soil has been saturated as a result of recent high rainfall or snowmelt, as well as to determine whether there has been a recent hydraulic overload.
However, if the situation persists, we can conclude that the leaching bed is no longer operating correctly (it is most likely clogged).
Greener and taller grass around the drainfield
A sign that your leach field is not operating correctly is the presence of higher, greener grass in the area where it’s supposed to be placed. When wastewater is unable to penetrate the soil, pressure can force it to rise to the surface, causing it to become visible. Because of the nutrients in the wastewater, the grass might grow more quickly and seem greener as a result of this.
Puddles of water in the yard
Puddles on the field may indicate that a hydraulic overload has forced water to come to the surface. If this is the case, contact the field superintendent immediately. When a leach field becomes blocked, the pressure builds up, forcing the water to rise. Large amounts of wastewater can practically pool on the ground when released into the environment. If the water smells like rotten eggs, avoid touching it and keep your children away from the area until the scent has been eliminated.
There have been instances where perforated pipes in the leach field have either disconnected or broken. If a large car has passed by, it is possible that this is what is causing the sewage to back up. Otherwise, a blockage is more likely to be the source of the problem.
Soil sinking or collapsing over the leachfield
The presence of excessively damp soil where the leaching bed is placed may also be an indicator that the leaching bed is no longer performing effectively, according to the manufacturer.
How to unclog your leach field?
When you find an issue with your leaching bed, you should make an attempt to fix it as quickly as possible. If this is not done, the condition may worsen and result in wastewater overflows. Those spills are potentially hazardous to both you and the environment. Also prohibited is the pollution of the environment, and local authorities may order you to replace your septic system if you fail to comply with the law. In addition to promoting the growth of biomat, as previously described, the discharge of organic particles into the leaching bed generates an imbalance in the natural water filtration system.
- As a consequence, a waterproof biomaterial sludge is formed, and this sludge significantly reduces the rate of infiltration of wastewater into the receiving soil, which is abnormal.
- Because of this, it is necessary to minimize the accumulation of organic matter in leaching fields and to reduce the thickness of the sludge layer that clogs the leaching fields.
- However, the one offered by Bio-Sol is without a doubt the quickest, easiest, safest, and most ECONOMIC method available!
- These shock treatments are 100 percent environmentally friendly (and hence safe), and they are simple to do on your own.
- It is typically necessary to introduce a high concentration of these bacteria and enzymes into the leaching bed in order to break down the organic waste that has collected in the leaching bed and unclog the leach field.
- The result is that your septic system is back in operating order!
- The majority of the time, this occurs when a large truck passes by.
- If this is the case, you should use a camera to evaluate the area to ensure that there is no structural damage.
How much does a new leach field cost?
Choosing to repair your leaching bed will almost certainly necessitate the replacement of your complete septic system as well. You will require a fresh percolation test as well as an appraisal by an engineer with appropriate qualifications. When using a standard septic system, you may expect to pay between $5,000 and $12,500 for the installation and maintenance. However, if you require the installation of a more sophisticated system, the cost of the replacement will be significantly higher (between $15,000 and $30,000).
As a result, we highly recommend you to attempt to resolve the problem first by selecting one of the alternative options that have been provided.
PROMOTION TO ASSIST YOU IN UNCLOGGING YOUR LEACH FIELD: By visiting our monthly specials page, you can receive a discount on a shock treatment. To save even more money, click here: SAVE UP TO 150$ ON A SHOCK TREATMENT WITH THIS PROMOTION.
Conclusion
A blocked leach field will jeopardize the integrity of the entire system. It can result in sewage backups in the house, septic smells, sewage leaking on the yard, and groundwater contamination, among other problems. Unclogging your leachfield with shock treatment can help you to avoid these and other problems associated with leachfield failure in the future. It is the injection of billions of bacteria and enzymes into the sewage system through the use of biological additives that is known as shock treatment.
This septic-safe solution from Bio-Sol is manufactured from bacteria and enzymes, and it will clear your leach field without harming the bacteria or enzymes in your system.