Becoming a licensed or certified septic tank installer generally involves completing an application detailing your background and professional experience, paying an annually renewable fee and passing an exam covering installation, operational details and safety procedures.
What is the process for getting a septic tank?
- Next – Test the soil quality. The quality of the soil is important when determining where to install your septic tank.
- Apply for Septic Permit. Once you have applied for a permit the authorities will come out,look over the property and tell you what type (s) of system can be
- Contact a Licensed Septic System Installer.
Do I need a certificate for a septic tank?
The General Binding Rules were designed to simplify the regulation of small sewage discharges. Septic tanks and small sewage treatment plants no longer need to be registered and there is no legal requirement to keep records of maintenance (although this is advisable).
How do you get a septic tank license in Ontario?
How to Become a Licensed Sewage System Installer in Ontario
- Step 1: Obtain Your Building Code Identification Number (BCIN)
- Step 2: Prepare for the OBC Part 8 Licensing Exam.
- Step 3: Book Your Exam Date and Location.
- Step 4: Register with MMAH and Pay Registration Fees.
Do you need a license to install septic tanks in Florida?
License Requirements for Septic Tank Contractors Anyone practicing septic tank contracting in Florida must be registered and approved by the State of Florida. This provides statewide training for any new installations or repairs of septic systems in Florida.
Are septic companies licensed in Georgia?
According to Title 31, section 31-2-7 of the Georgia Health Code, all contractors and companies who install septic tanks must be certified.
Are septic tanks still legal?
Septic Tanks Explained… Septic tanks cannot discharge to surface water drains, rivers, canals, ditches, streams or any other type of waterway. you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.
Is it illegal to sell a house with a septic tank?
If you’re selling a property with a septic tank, then you must be transparent with buyers about the fact the property uses a one and provide a detailed specification of the system. In fact, You are required by law to inform a buyer in writing about the presence of a septic tank.
Can I install my own septic system in Ontario?
All residential septic systems in Ontario must be built according to the Ontario Building Code, notwithstanding how the home will be used. The septic system is engineered the same, whether the residence is full-time or seasonal, or, whether only one person is occupying the house or four of them.
Who can design septic system Ontario?
The Municipality / Health Unit Officials regulate the design, construction and approval of on-site private sewage systems with a design capacity of less than 10 000 litres per day.
How do I become a septic inspector in Ontario?
In order to become a qualified and licensed installer in the province of Ontario the following must be completed: Ministry of Municipal Affairs and Housing On-site Sewage Systems – 2006 Exam. Participants must register for their own exam at least 21 days before their preferred examination date.
How far is septic tank from house?
Local codes and regulations that stipulate the distance of the septic tank from the house vary depending on the locale, but the typical minimum distance is 10 feet.
How much does it cost to install a septic tank in Florida?
Purchasing and installing a septic systems can cost anywhere from $1,500 – $15,000. The price varies based on the size of the system and the type of soil. Homes with more than two bathrooms will need a larger tank, which increases the material costs.
What size septic tank do I need in Florida?
Size of Tanks A septic tank in Florida must have a minimum 900 gallon capacity for up to 300 gallons of sewage flow per day. This gallon capacity increases on a sliding scale by household size and whether or not the building is intended for commercial use.
How do I get certified to install septic tank in GA?
Certified Lists:
- Review the certification requirements for individuals and companies.
- Study for the exam(s).
- Contact your County Environmental Health Office to schedule your exam.
- Complete the application(s) and bring them to your county.
- If starting a new company, pay your company certification fee.
Can I install my own septic tank in Georgia?
Septic tanks installed after February 20, 2000 are required to have two compartments and an effluent filter. The minimum size septic tank approved for use in the State of Georgia is a 1000 gallon tank, which will serve a 3 or 4 bedroom house.
Who regulates septic systems in Georgia?
Environmental Health is responsible for regulating individual residential and smaller commercial septic systems (<10,000 gal of water per day). Large systems (>10,000 gpd) are regulated by the GA Environmental Protection Division (EPD).
Permits, Licenses and Reports
If you pick an accelerated alternative, please tell the office with your selection of options as soon as possible. Fee for application: $150
- Step 1: Read and completely complete the Onsite Wastewater System Applicationand send it to your local Environmental Affairs Office. Step 2: An original plat or deed of the land will also be required to be submitted. If you do not have a copy of the plat or deed, you may learn more about how to get one by clicking here. The office will contact you as soon as your application has been received to confirm receipt of your application and to discuss electronic payment alternatives with you. We do not take cash as a form of payment. Please see this sample application, Onsite Wastewater System Application, for a reference guide on how to complete the application. Step 2: Your application will be examined to ensure that all required material has been submitted and is in order. If everything is in order, your application fee will be accepted
- Otherwise, it will be rejected. Step 3:If a site visit is necessary, the inspector will assess the appropriateness of the property for the installation of a septic system. If the inspector finds that your site is suitable for a typical septic system, he or she will give you with a Permit to Construct document. The inspector will discuss possible solutions with you if the permit is not approved by the inspection team. A request for test pits may be made by the Department in circumstances where the evaluator meets a barrier during the first site evaluation or in cases where it is recognized that an area would require test pits owing to the soil characteristics of the region. The midlands and upstate parts of the state are the most typical locations where soil characteristics necessitate the use of test pits. It is important to note that test pits may not be an option in coastal and sandy locations around the state. Consult with your local office staff for more detailed information on your individual situation. As soon as you have received your Permit to Construct, you should call a professional onsite wastewater system contractor to complete the installation of your septic tank. In Step 5, the installer must call DHEC in order to schedule a time for the septic system to be inspected before it is covered, before completing the septic system installation. After waiting 30 minutes over the scheduled time for a DHEC inspector, a licensed installer has the option to conduct a self-inspection of the installation to ensure that everything is in working order. The installation is required to provide documentation to the Department on the DHEC-approved formD-3978, Contractor Approval to Operate
Expires and modifications to permits: Permits to Construct are valid for five years. If you want to renew your permission after five years, or if you want to make modifications to it after it has been authorized, you must submit a new application and pay the price once again. These regulations authorize the charge and permission in the following ways:
- Regulation 61-56, Onsite Wastewater Systems
- Regulation 61-55, Septic Tank Site Evaluation Fees
- And Regulation 61-56, Onsite Wastewater Systems
Because improperly designed septic systems can degrade water quality and cause illness, South Carolina law mandates that all septic systems have site approvals and permits before they can be installed. If you want to construct a home or relocate a prefabricated home on land that is not served by a public or municipal sewer system, you must first seek clearance from the Department of Health and Human Services and a permit to install a septic system. You will be unable to obtain a building permit until you obtain this permit from your local government.
- Depending on how saturated the soil is, we may not be able to conduct a thorough examination.
- This is analogous to farmers being forced to postpone the planting or harvesting of their crops.
- To submit an application for a septic system, you must first download and complete anonsite wastewater application, which you must then submit to your local Environmental Affairs Office.
- If you have any questions, please contact the Environmental Affairs Office in your area for assistance.
Application Form
Complete the application for a License to Construct or Clean Onsite Wastewater Systems and Self-Contained Toilets by downloading and completing the form. Please contact your local Department of Health and Human Services Environmental Affairs office to make preparations for testing if you are interested in becoming a septic system installation.
License Fees
Complete the application for a License to Construct or Clean Onsite Wastewater Systems and Self-Contained Toilets by downloading and completing the application form.
Please contact your local Department of Health and Human Services Environmental Affairs office to make arrangements for testing if you are interested in becoming a licensed septic system installation.
- Licensing fees for construction are $100, cleaning fees are $100, and a combined construction and cleaning fee is $150
- A Master Contractor license is $200.
You must pay these costs on an annual basis in order to keep your license active. An additional late fee will be levied if we do not receive payment by the due date on your invoice. Unless you pay your renewal costs and late fees within 90 days of the due date for your license to operate on septic systems or truck sewage, your license to do so will automatically expire.
Installer and Master Contractor Exams
In order to be approved to construct work with septic systems and/or wastewater disposal, as well as for a Master Contractor license, you must first pass an exam that assesses your knowledge of Regulation 61-56, which is available online. To pass, you must have an 80 percent or higher score. If you do not pass this test on the first try, you can repeat it within 30 days of failing. If you fail the test a second time, you can repeat it after 60 days if you have not passed the first time. You will not be required to repeat the exam once you have been granted a license, provided that you continue to pay the yearly license renewal costs and submit all required paperwork.
Other License Requirements
- In order to be approved to construct work with septic systems and/or wastewater disposal, as well as for a Master Contractor license, you must first pass an examination that assesses your knowledge of Regulation 61-56. Scores of 80 percent or above are required to pass. It is possible to repeat this test within 30 days if you do not pass the first time around. if you fail the second time, you can repeat the test after 60 days if you want to try again. You will not be required to repeat the exam once you have been granted a license, provided that you continue to pay the yearly license renewal costs and submit all required paperwork. If you allow your license to expire, you will be required to start over from the beginning with the new license procedure.
The following regulations permit the issuance of septic system contractor licenses:
- Regulation 61-56, Onsite Wastewater Systems
- Regulation 61-56.1, Permit to Construct or Clean Onsite Sewage Treatment and Disposal Systems and Self-Contained Toilets
- And Regulation 61-56, Onsite Wastewater Systems Licensing of Onsite Wastewater Systems Master Contractors (Regulation 61-56.2)
Tags
Septic Tank Alerts Septic Tank Alerts
Occupational Licenses: On-Site Sewage Facilities (Septic Systems)
Obtaining an on-site sewage facility license in the capacities of Designated Representative, Site Evaluator, Installer I and II, Apprentice, Maintenance Technician, or a Maintenance Provider is covered in detail in the following documents:
On-Site Sewage System (OSSF) Information and Requirements
View all of the information and requirements for occupational licensing and registration.
OSSF Licensing and Registration Overview
State Regulations:In order to work as an OSSF installation, apprentice, maintenance provider, or maintenance technician in Texas, you must be licensed or registered with the Texas Commission on Environmental Quality (TCEQ) prior to beginning work.
- DesignatedRepresentative License: This license must be issued by the TCEQ and must be used in conjunction with an authorized agent of the TCEQ. TCEQ-certified site inspectors conduct site evaluations (when it is part of their job duties), complaint investigations, system evaluations, and inspections of operating systems and software facilities that have been issued an authorization to construct in order to ensure that the OSSF’s installation meetsthe criteria established by the TCEQ, or by the Authorized Agent Order that has been approved by the TCEQ, whichever is more stringent
- Site EvaluatorLicense: Must be licensed by the Texas Commission on Environmental Quality (TCEQ) or have a Texas Professional Engineer license. He or she is authorized to conduct preconstruction site evaluations to determine the suitability of an existing or proposed OSSF system and to identify any features within or near the location where an OSSF system is to be installed that could be contaminated by the OSSF or that could interfere with the proper operation of the system. Septic tank installers are permitted to install standardOSSF systems, which include a variety of types of tanks and drainage systems such as absorption drainfields, unlined ET drainfields, leaching chambers, gravel-less pipe, and pumped effluent drainfields. Installer IILicense: a license that allows the holder to install all sorts of OSSF systems. ApprenticeRegistration: Approved to act as a representative of the supervisinginstaller on the project site However, they are only permitted to undertake OSSF installation services under the continual, direct supervision of a qualified installer, either on-site or by radio or other direct communication methods, as determined by the licensing authority. If there is no on-site supervision, the license installer must visit the project site at least once every day to ensure that the apprentice’s work is being completed in compliance with the requirements of the State or Authorized Agent. The maintenance technician registration program authorizes individuals to undertake activities related with OSSF maintenance, but only under the direct supervision and direction of the maintenance provider, either on-site or by direct connection with the maintenance provider
- And Aerobic treatment on-site disposal systems are covered by the Maintenance Providers License, which authorizes the provision of service or maintenance.
Return to the top of the page
OSSF Designated Representative License Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
TEEX is an OSSF-approved training program.
Application and Examination
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
- Applicants who have a Designated Representative application that has been granted or those who need to retest may do the following:
- You can either register for a computer-based test (CBT) or register to take a paper-based test.
Note It is not permissible for Licensed Individuals to conduct any Designated Representative tasks until they have been hired by an authorizedagent. Return to the top of the page
OSSF Site Evaluator License Requirements
- Note It is not permissible for Licensed Individuals to conduct any Designated Representative activities unless they have been hired by an approved agent. Return to the beginning of the page
- Current Installer II license
- Designated Representative license
- Texas Professional Engineer license
- Texas Professional Sanitarian license
- Certified Professional Soil Scientist
- Or Texas Professional Geoscientist license in the soil science discipline
- Texas Professional Soil Scientist certification
- Or Texas Professional Soil Scientist certification
Training Course
TEEX is an OSSF-approved training program.
Application and Examination
Return to the top of the page
OSSF Installer I License Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
TEEX is an OSSF-approved training program.
Application and Examination
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
- The following options are available to applicants who have an approved Installer I application or who need to retest:
- You can either register for a computer-based test (CBT) or register to take a paper-based test.
Return to the top of the page
OSSF Installer II License Requirements
- Education: There are no minimal educational qualifications
- WorkExperience: There are no work experience requirements.
The applicant must be in possession of an OSSF Installer I license for at least one (1) year and present any of the following documents:
- For OSSF I to II, a sworn statement from either a designated representative who approved theinstallations or from three individuals for whom the applicant performed construction services (statements cannot be provided by individuals who are related by blood or marriage to the applicant or applicant’s spouse)
- Or, other documentation of the applicant’s work experience approved by the executive director.
Applicants who hold an Apprentice Registration must have had the registration for a minimum of two (2) years and provide one of the following documents –
- When applying for Apprentice to Installer II, you must submit an asworn statement from either an authorized representative who witnessed theinstallations or the installer for whom the applicant performed construction services, whichever is greater
- Or, alternative documentation of the applicant’s work experience that has been approved by the executivedirector.
Training Course
TEEX is an OSSF-approved training program.
Application and Examination – Registered for the Course on or before December 31, 2020
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
- The following options are available to applicants who have an approved Installer II application or those who need to retest:
- You can either register for a computer-based test (CBT) or register to take a paper-based test.
Return to the top of the page
OSSF Apprentice Registration Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
Return to the top of the page
OSSF Maintenance Technician Registration Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
The Texas On-Site Wastewater Association is a non-profit organization dedicated to the prevention and treatment of on-site wastewater.
Application
- Applicants must finish the training with TOWA (409-718-0645) before submitting an application to the Texas Commission on Environmental Quality. Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
Return to the top of the page
OSSF Maintenance Provider License Requirements
- Education: There are no minimal educational requirements
- Work Experience: There are no work experience requirements.
- Be in possession of a Class C or higher Wastewater Treatment Operator license
- And Be in possession of an OSSF Installer II license. possessing three (3) years of experience as a certified Maintenance Technician
- Or possessing previous to September 1, 2009, registration as a Maintenance Provider
Training Courses
The Texas On-Site Wastewater Association is a non-profit organization dedicated to the prevention and treatment of on-site wastewater.
- BasicMaintenance Provider (BMP) Course
- AdvancedAerobic Maintenance Provider (AMP) Course
- BasicMaintenance Provider (BMP) Course
Application and Examination
- Prior to submitting an application with the TCEQ, applicants must have completed the BMP course and be registered for the AMP course with TOWA (409-718-0645). The TCEQ requires that you submit an application and a fee ($111) at least 30 days ahead to the planned AMP course in order to be eligible to test at the completion of that course. The following options are available to applicants who do not intend to test at the completion of the AMP course and who have submitted an approved Maintenance Provider application, as well as those who require a RETEST:
- Take a Computer-Based Test (CBT) or a Paper-Based Test by registering online.
Return to the top of the page
OSSF Licensing Exemptions
For a complete list of exemptions, please see 30 TAC 30.244. Return to the top of the page
Renewal Requirements
Permits and registrations for occupations are valid for a period of three years. A renewal application and criminal background attestation, as well as payment of the renewal cost, must be submitted by candidates who have fulfilled the CErequirements (if applicable). A comprehensive list of details may be obtained on the newal website. In order to be eligible for renewal, all On-Site Sewage Facility licenses, with the exception of the Apprentice and Maintenance Technician registrations, must have completed 24 hours of Continuing Education (CE).
Hours of continuing education (CE) must be earned prior to the expiration of the license, and they may be earned at any time within the license’s active cycle.
Return to the top of the page
Septic System Related Permits
In order to obtain answers to any queries they may have and to negotiate testing schedules, new installation candidates must first contact their local Environmental Field Office. The “Application for Subsurface Sewage Disposal System Installer Permit” (above) and the related permit fee must be completed and submitted by the applicant following the successful completion of the tests. Renewals: Installer permits are valid for one year and expire on December 31st. Invoices for permission renewal are mailed out in the fall, just before the permit’s expiration date.
With the invoices, you will find information on how to make an online payment.
Parks AvenueNashville, TN 37243 if you need to make changes to your company information.
Those installers who did not renew their license the previous year must repeat and pass the installation examination the following year.
How Will My Application Be Processed?
The application is subjected to a thorough evaluation, and the applicant is notified by mail when the review is completed. This procedure is finished within 45 days of the date of the application being submitted. Remember that if an applicant was denied permission to apply the previous year or did not perform well, they will be asked to sit for a written test. To be given a permit, applicants must receive seventy (70) percent of their questions accurate or above. In order to be approved, applicants must successfully build a conventional or alternative subsurface sewage disposal system under the supervision of a person recognized by the Department.
Permits are valid for one year and must be renewed on December 31 of each year. Permits are not transferrable and become null and void when the owner of the vehicle changes.
Rights and Responsibilities?
APPLICANT:
- Is authorized by the Department to proceed with the activities outlined in the approved permit
- Must notify the Department of any changes to application information
- And is responsible for complying with all applicable state statutes and regulations. Is required to display an identifying sticker provided by the Department on any installer vehicle
- Must notify the Division when a system has been installed so that it can be inspected and approved.
- Obtains the authority to inspect each SSDS installation to ensure that it was installed in accordance with permit conditions and regulatory requirements
- The authority to revoke or suspend a permit to any applicant who violates state statutes or departmental regulations
- And the authority to deny issuance of a permit to any applicant who violates state statutes or departmental regulations.
Any individual who violates or fails to comply with state legislation, rules, or regulations may be susceptible to civil fines as a result of their actions.
How to Become a Licensed Septic System Contractor
LauriPatterson/iStock/GettyImages However, while not all states need contractors who work on septic systems to be licensed, the state licensing boards that do require contractors to be licensed differ in their criteria. Various degrees of license are required in Texas, for example, to allow septic system specialists to undertake specified jobs in the state. In addition to obtaining the necessary state and municipal business licenses, state professional licensing boards often demand successful completion of basic training courses, job experience, and the passing of a licensing examination before granting professional licenses.
Minimum Certification Requirements
For septic contractors to be certified in states that demand it, candidates must be at least 18 years old, submit a completed application for certification, complete the appropriate amount of classroom instruction hours, and pass either a written or an oral certification examination. Plumbing services for septic systems are allowed in some areas, such as Florida, if the plumber is licensed by the state. In addition to completing the licensure criteria, mechanical competence, as well as customer service and business abilities, are required for this position.
Septic Contractor Exam
A professional license or certification, as opposed to a business license, which permits a person to lawfully run a business, demonstrates that a contractor is informed about the regulations and laws governing his or her field of competence. Where state and local governments require septic system contractors to be licensed, passing the licensing exam demonstrates that a contractor has extensive experience, is proficient, and is qualified in the field of septic system installation and repair. According to state rules and federal regulations controlling private sewage disposal, inquiries in Illinois, for example, are based on these restrictions.
Additional Governmental Requirements
Although some states, such as Minnesota, do not need septic contractors to hold local licenses in addition to their state licenses, other states, such as New York, do require them to. In that situation, a contractor must first get the necessary permissions and become familiar with the local rules before beginning work on a project in that city or town. Contractors are expected to pay all necessary license and permit costs as well as provide proof of general liability insurance to the City of Chicago.
While state licensing boards have the authority to withhold certification if an applicant is found guilty of misbehavior, misrepresenting information, or breaching state laws, it is often the responsibility of local governments to ensure that the standards are followed.
Continuing Education
Although some states, such as Minnesota, do not need septic contractors to hold local licenses in addition to their state licenses, other states, such as New York, do demand this. As a result, before beginning any work in a municipality, a contractor must get the necessary permissions and become familiar with the local legislation and regulations. Contracting firms are expected to pay all appropriate license and permit costs, as well as to provide proof of general liability insurance coverage.
In the event that an applicant is found guilty of misbehavior, misrepresenting information, or breaching state laws, state licensing boards have the authority to reject certification.
Cabinet for Health and Family Services
Amber Ballinger is the point of contact for the company.
How to become a certified septic system installer in Kentucky
Examining installers is conducted by the local health agency. Contact your local health department and ask to talk with an environmentalist about taking the installer test. The Kentucky onsite sewage disposal system requirements are covered in detail in the installation test, which is open book. The exam costs $25, and you must pass with a score of at least 70 percent in order to be certified. You must also present proof of liability insurance to the local health department.
Certified Septic System Installer Training
Classes for Septic System Installers Beginning on April 1, 2021, and concluding on March 31, 2022, the current certification year will be in effect. Installers are required to complete six hours of certified maintenance training throughout this period. The installation professionals who became certified during the first nine months of the certification year (from April 1 to December 31) are also obliged to complete two training courses or the equivalent by March 31, 2022. Installation certificates for those who do not attend training will expire on April 1, 2022, unless they are renewed.
The local health department must also be presented with a copy of the most recent proof of liability insurance.
For further information about certified installation training, please contact Amber Ballinger at (502) 564-4856 or send her an email.
Local Health Department Environmentalist Training Opportunities
Sarah Wilhoite is the point of contact for the staff.
Spring 2022 General Sanitation Core Training
Angela Billings is the point of contact for the staff. TRAIN Course Number 1101472 may be registered for online. Spring Soils I will be held at the University of Kentucky from March 14-17, 2022. Spring Phase I will take place in Frankfort, Kentucky, at the CHR Building, Conference Suite C, on April 11-14, 2022. Phase II of the spring season will take place from June 13-17, 2022 at TBDSummer Soils I will take place from July 18-21, 2022 at the University of Kentucky Summer Phase I will take place in Frankfort, Kentucky, at the CHR Building, Conference Suite C, from July 25 through August 18, 2022.
Fall Phase I will take place in Frankfort, Kentucky, in the CHR Building, Conference Suite C, from October 31 to November 3, 2022.
Agricultural Soils II for Environmentalists: July 13-14, 2022 at Barren River District Health Department, TRAIN Course number 1101449. Fall Phase II: February or March 2023, venue to be determined.
How To Become a Sewage System Installer in WV
The certification of individual sewage system installers is required by legislative rule 64 CSR 9, Sewer Systems, Sewage Treatment Systems, and Sewage Tank Cleaners, which is found in the Code of Virginia. An individual sewer system installer is defined as anybody who is involved in the construction, installation, modification, extension, alteration, and location of an individual or on-site sewer system, sewage tank, or excreta disposal system, as well as any other related activities. A certified installer is not required to oversee the installation of a part or parts of a system, nor is certification required of a driver delivering a part or parts of a system, or an employee of a contractor who has obtained certification, as long as that employee is under the direct supervision of a certified installer on the job site.
The installation of conventional soil absorption systems, soil absorption beds, holding tanks, effluent lift stations, and grey water soil absorption systems is covered by a Class Icertificate.
Initial Certification – Class I and Class II
Qualifications and Examinations for Class I Personnel
- Application must be submitted by a person who is at least 18 years old. The applicant must pass a written test with a passing mark of at least 70%. If you require an oral examination, you can schedule one at your convenience. Exams are conducted in the Central Office in Charleston as well as at the District Offices around the state. A $150.00 charge is required for the five-year certification. The sole exception to this rule is tests provided following a classroom training experience in which the examination is included in the course. When you come in for your examination, you must pay the fee in full. Payable to the West Virginia Bureau of Public Health, your check or money order should be made out to them. There is no acceptance of cash, debit, or credit cards
Applicants who fail a test must wait thirty (30) days before being re-examined for the test. If the applicant does not pass the examination and chooses to end the application for certification procedure, the $150.00 money will be reimbursed to him or her. Applicant Who Has Been Accepted Successful candidates will be sent a wallet-size certificate in the mail, and their names will be entered into the Public Health Sanitation Division’s Online Sewage Installers Database, which is accessible online.
- Class II (Secondary) Only a qualified Class I installer is eligible to seek for certification as a Class II installation.
- When a Class I installer passes the Class II examination, his or her Class I certificate will be upgraded to a Class II certificate, with no change in the expiration date of the Class I certificate.
- Except in the case where the expiration date of the Class Icertificate is fewer than sixty (60) days from the day the Class IIexamination was given, a new certificate will be granted, and a $150.00 fee will be charged.
- Applicants who fail a test must wait thirty (30) days before being re-examined for the test.
- The application for certification must be denied if the applicant employs one or more individuals who work in WestVirginia and the applicant is in default with unemployment or workers compensation benefits, as defined byLegislativeRule 96 CSR 1.
Defaulted employers can be found on the Internet at theBureau of EmploymentPrograms’web site.
Renewal of Certification – Class I and Class II
- Class I and Class II installers must submit anApplication for Renewal to the West Virginia Bureau of Public Health – Public Health Sanitation Division in order to renew their licenses. You may download a copy of the form by clicking here. The signature and recommendation for renewal of a Local Health Department Sanitarian in a county who is familiar with the individual’s work is required on the application. It is necessary to pay a $150.00 fee with the application in order to renew the certification for another five (5) year period. Payable to the West Virginia Bureau of Public Health, your check or money order should be made out to them. If you want to pay for your certification renewal online, you may do so by going here. Please keep in mind that you must submit a paper application in addition to completing the online form and making the payment.
Class I and Class II installers must submit an Application for Renewal to the West Virginia Bureau of Public Health – Public Health Sanitation Division in order to maintain their licenses. You may download a copy of the form by visiting this link. According to the application, a Local Health Department Sanitarian in a county who is familiar with the individual’s work must sign and propose the individual’s renewal. It is necessary to pay a $150.00 fee with the application in order to renew the certification for another five (5) years.
Your certification renewal fee can be paid for online by visiting the website listed below.
Homeowners, Landowners Examination
An individual who intends to build their own sewer system is not needed to be certified as a Class I installer; nonetheless, they must pass a written examination proving understanding of the applicable regulations. The homeowner examination can be completed and graded at any local health department location. It is possible that a price will be charged to administer the examination. Make sure to check with your local health department before installing or making changes to any existing onsite sewage disposal system.
How to Obtain a Septic Tank License From the Georgia Department of Health
An individual who intends to build their own sewer system is not needed to be certified as a Class I installer; nonetheless, they must pass a written examination proving awareness of the standards that apply to their situation. The homeowner’s examination can be completed and scored by any local health authority. In some cases, payment for the administration of the examination will be necessary. Before building or changing any existing onsite sewage disposal system, check with your local health department first.
Department of Environmental Quality : Installer and Maintenance Provider Certification : Residential Resources : State of Oregon
A homeowner or landowner who intends to establish their own sewer system is not needed to be certified as a Class I installer, but must pass a written examination proving understanding of the applicable standards. Any local health agency can administer and score the homeowner’s examination. An administrative charge for administering the examination may be needed. Before building or changing any existing onsite sewage disposal system, check with your local health department. Onsite Sewage Return to the Public Health Service (PHS) page
- The following is a list of certified Onsite System Installers provided by Chemeketa Community College:
Maintenance Providers: A maintenance provider who inspects, maintains, or certifies the maintenance of onsite systems that use alternative treatment technologies, recirculating gravel filters, or sand filters must be certified as a maintenance provider and certified by the manufacturer of the system in which the inspection, maintenance, or certification is performed.
- Providers of Onsite Systems: A provider of onsite systems using alternative treatment technologies, recirculating gravel filters, or sand filters who inspects, maintains, or certifies the maintenance of onsite systems must be certified as a maintenance provider and certified by the manufacturer of the system.
Are you a newcomer to the industry? It is intended for those who have a working knowledge of excavation work, basic septic systems, and the overall process of developing, submitting, and maintaining designs and permit applications.
You might want to consider taking some self-study online training programs if you are not yet at this level of proficiency. A variety of seminars are offered by the National Onsite Wastewater Recyclers Association, including Introduction for Installers and Septic Systems A to Z.
Recertification
Following first certification, re-certification is necessary every three years after that. In the following year following their most recent certification, Chemeketa Community College will recertify installation and maintenance providers who have completed 18 hours (1.8 Continuing Education Units, or CEUs) of acceptable continuing education. Courses that have been approved must be completed within six months of the expiration of a current certification. You must present proof of completion of authorized CEUs to Chemeketa, as well as the appropriate price, in order to recertify.
You must have a current certification in order to construct, install, repair, or maintain a septic system; thus, keep your certification up to date.
Apply to the OESAC for courses that you or your organization is hosting, or has held in the past, and for which your organization would want to be considered for recertification credit.
Look for courses that have been approved by installers and/or maintenance providers.
Inspectors
This form should be used if you are a qualified installer or maintenance provider who wishes to identify oneself as a “Existing System Evaluation Inspector.” Please access and complete the form.
Frequently Asked Questions – Onsite Wastewate Arkansas Department of Health
Q: Can you tell me where I can acquire a copy of my septic tank permit? Answer: Contact the local health department in the county where the property is situated and ask to speak with the Onsite Environmental Specialist (on site environmental specialist). Having information on the home’s construction date, the subdivision namelot number, and the name of the original owner or developer will be helpful. Local Health Units (LHUs): Q: What is the smallest lot size that can accommodate a septic system?
When it comes to how much space a sewage system needs, it all comes down to the soil appropriateness of the site, the number of bedrooms in the house, and the distance of 100 feet between the house and water wells.
Q: How do I go about obtaining a septic system permit?
A list of private persons in your region who are licensed to do soil testing and design sewage systems will be provided to you by the authorities.
- Answer: You may do a search of our database of Onsite Wastewater Licensees by visiting this link. For example, if you are searching for someone to design a septic system, you will need to pick the “Designated Representative” licensing type, however if you are looking for someone to build a septic system, you will need to select the “Advanced Septic Installer” license type.
Q: Can you tell me where I can get a list of companies who install septic systems? Answer: Contact the local health department in the county where the property is situated and ask to speak with the Onsite Environmental Specialist (on site environmental specialist). Local Health Units (LHUs): Q: What is the process for obtaining a Designated Representative License? Answer: Designated Representatives are defined and listed in Act 402 of 1977, which establishes and provides the requirements for Designated Representatives.
- Case-by-case consideration is given to those who are similarly competent in terms of education and experience in the field of soil science.
- The dates for the examination tests may be found on the Training and Examination website.
- See On-Site Wastewater Rules and Regulations Q: What is the process for obtaining a Septic Tank Installer License?
- The test is performed 10 times a year, from January to October, at a fixed time and location.
- The dates for the examination tests may be found on the Training and Examination website.
- Answer: Under the terms of Act 402 of 1977, applicants for onsite maintenance provider licenses must pass a licensing examination sponsored by the Department of Transportation.
- The test is performed 10 times a year, from January to October, at a fixed time and location.
The dates for the examination tests may be found on the Training and Examination website.
Answer: Individuals or businesses interested in manufacturing and/or distributing septic tanks in Arkansas can acquire information on the requirements and pre-licensing inspections by calling the Onsite Waste Program at the phone number mentioned below for further information.
Q: How do I go about obtaining a Septic Tank Cleaning Permit?
Act 71 of 1973 mandates that septic tank cleaning candidates must pass a license examination held by the Department before being granted a permit to work in the industry.
The examination is free of charge.
See the Onsite Wastewater Rules for further information.
Refer to the Engineering Subdivision Plan Review Guidelines for further information.
Answer: Refer to the Guidelines for the Submission of Plans for Mobile Home and Recreational Vehicle Parks for further information.
Non-Individual Sewage System is the correct answer.
Answer: Contact the Regional Health Office and ask to speak with the Regional Director.
Answer: The percolation test is simply an approximate measure of a soil’s capacity to flow water through its structure.
As a consequence of this extra knowledge, a sewage system design is developed that overcomes the limits of the soil.
Answer: In order to qualify for the exemption, the home must be located on ten or more acres, and all portions of the sewage system must be more than 200 feet from any property border or road, including any roadways.
The property owner is still responsible for ensuring that the sewage system is installed and operated in a way that complies with state regulations and does not create a nuisance.
A letter from the local Health Unit certifying that the property is exempt from the permit requirement can be acquired by contacting them. This exception does not apply to any other state or federal restrictions that may be in place.
Septic Designer or Installer
I’m looking for a list of people who build septic systems. Can you help me out? In order to contact the Onsite Environmental Specialist, you must contact the health unit in the county in where the property is located and ask for him or her. Units of Health Care in Your Community In order to get a Designated Representative License, please follow the instructions below. Answer: Designated Representatives are defined and listed in Act 402 of 1977, which specifies and provides the requirements for them.
- Case-by-case consideration is given to those who are similarly qualified and have education and expertise in soil science.
- Examination test dates may be found on the Training and Examination portion of this website.
- See Regulations Concerning On-Site Wastewater Q: How can I obtain a license to install septic tanks?
- In the months of January through October, the test is delivered 10 times a year at a fixed time and place.
- What steps do I need to take in order to obtain an On-Site Maintenance Provider License?
- Upon request, a training CD can be obtained by calling the Onsite Waste Program at the phone number provided below.
- Examination test dates may be found on the Training and Examination portion of this website.
Answer: Individuals or businesses interested in manufacturing and/or distributing septic tanks in Arkansas can acquire information on the requirements and pre-licensing inspections by calling the Onsite Waste Program at the phone number mentioned below for further information.
Q: How can I obtain a license to clean septic tanks?
According to Act 71 of 1973, septic tank cleaning candidates must pass a licensing examination held by the Department before being granted a license.
Examination test dates may be found on the Training and Examination portion of this website.
In order to submit plans for a subdivision, please follow these instructions.
In order to submit designs for a mobile home park or recreational vehicle park, please follow the instructions below.
What is the best way to submit plans for a wastewater treatment system that will service more than one building?
I am having a problem with my local Environmental Specialist.
Call the Regional Health Office and ask for the Regional Manager, which is the appropriate response.
Answer: The percolation test is merely an approximate measure of a soil’s capacity to transfer water through the soil structure.
As a consequence of this extra knowledge, a sewage system design is developed that overcomes the limits of the soil.
Answer: In order to qualify for the exemption, the home must be located on ten or more acres, and all portions of the sewage system must be more than 200 feet from any property border or road, including roadways.
The property owner is still responsible for ensuring that the sewage system is installed and operated in a way that complies with state regulations and does not create a hazard to others.
Obtaining a letter from the local Health Unit declaring that the property is exempt from the permit requirement is possible. Any other state or federal obligations are not excluded from this provision.
SSTS individual certification
Q: Can you tell me where I can get a list of people who install septic systems? Answer: Make a phone call to the county health department in where the property is situated and ask to speak with the Onsite Environmental Specialist. Units of Local Health Care Q: What is the process for obtaining a Designated Representative license? Answer: Designated Representatives are defined and listed under Section 402 of the 1977 Act. Registered Professional Engineers, Registered Professional Land Surveyors, Registered Professional Sanitarians, and Licensed Master Plumbers are all examples of professionals who are registered in their field.
- The candidate must pass a license test performed by a committee of Registered Professional Sanitarians hired by the Department four times a year.
- Get in touch with Environmental Health Protection if you need further information.
- Q: What is the process for obtaining a Septic Tank Installer’s License?
- In the months of January through October, the test is performed 10 times a year at a fixed time and location.
- Q: How can I obtain a license as an Onsite Maintenance Provider?
- On request, a training CD can be obtained by calling the Onsite Waste Program at the phone number indicated below.
- The dates for the examination tests are available on the Training and Examination website.
Answer: Individuals or businesses interested in manufacturing and/or distributing septic tanks in Arkansas can acquire information on regulations and pre-licensing inspections by calling the Onsite Waste Program at the phone number indicated below.
Q: How can I obtain a license to clean septic tanks?
Pre-licensing exams offered by the Department of Health and Human Services are mandated under the Septic Tank Cleaner Licensing Act of 1973.
The dates for the examination tests are available on the Training and Examination website.
Q: What is the procedure for submitting plans for a subdivision?
Q: What is the process for submitting designs for a mobile home park or recreational vehicle park?
What is the best way to submit plans for a sewerage system that will service more than one building?
In the event of a disagreement with my local Environmental Specialist, who should I contact?
Units of Local Health Care What is the reason for the Health Department’s requirement for soil pits rather than percolation tests?
The soil pits are used by the Designated Representative and the Environmental Specialist to estimate the depths of rock, the presence of any impermeable soil layers, and the expected level of groundwater during the rainy seasons of the year, among other things.
Q: Is there any kind of exemption from the requirement to obtain a septic system permit?
The exemption applies exclusively to the process of getting a permit.
A letter from the local Health Unit declaring that the property is exempt from the permit requirement can be acquired. Any other state or federal obligations are not excluded from this exception.
To become and maintain certification, the following requirements must be met:
- Training and testing are required. Work experience with SSTS projects
- An application, which includes verification of previous work experience
- Education that is never-ending
- Every three years, certification must be renewed.
The SSTS search tool allows you to locate a record of your particular certification, including the expiration date and number of continuing education credits (click on the Certified individual tab).
Training and certification requirements
Type of work | Training and exams needed | Required certification | Required experience |
---|---|---|---|
Install SSTS | Introduction, installing | Installer |
|
Sewage tank evaluation, cleaning, and repairs; portable toilets and septage management | Introduction, maintaining | Maintainer | 15 pump-outs and disposal with a Maintainer |
SSTS operational assessment, adjustment, sampling, and interpretation of operational performance, repair, groundwater monitoring, and collection system maintenance | Introduction, service provider | Service Provider | None |
Design of Type I – Type III systems ≤ 2,500 gpd for residential strength waste | Introduction, installing, basic design, soils | Basic Designer |
|
Design of Type I – Type V* systems ≤ 2,500 gpd for residential strength waste | Introduction, installing, basic design, soils, intermediate design and inspection | Intermediate Designer | None |
Design of Type I – Type V* systems ≤ 10,000 gpd | Introduction, installing, basic design, soils, intermediate design and inspection, advanced design and inspection | Advanced Designer | None |
Inspection of Type I – Type III systems ≤ 2,500 gpd for residential strength waste | Introduction, installing, basic design, inspecting, soils | Basic Inspector |
|
Inspection of Type I – Type V* systems ≤ 2,500 gpd for residential strength waste | Introduction, installing, basic design, inspecting, soils, service provider, intermediate design and inspection | Intermediate Inspector | None |
Inspection of Type I – Type V* systems ≤ 10,000 gpd | Introduction, installing, basic design, inspecting, soils, service provider, intermediate design and inspection, and advanced design and inspection | Advanced Inspector | None |
Operation of systems10,000 gpd (LSTS) | Introduction, service provider** | Service Provider |
The competence of an adequately licensedAELSLAGID professional** is required for Type V SSTS. It is also necessary to obtain wastewater certification.
Enroll in training
The Onsite Sewage Treatment program at the University of Minnesota provides instruction for all certification specializations. The MPCA does not have access to records of training enrolment at the University of Minnesota. To be eligible to participate in the Intermediate and Advanced Design/Inspection seminars, you must first be a qualified designer or inspector with no restrictions. There are no prerequisites for any other course, and they can be taken in any sequence. The Introduction to Onsite Systems course is strongly recommended by the MPCA team as a starting point.
- Education and training: Individual Sewage Treatment System seminars conducted on-site by the University of Minnesota Extension Service
For certified individuals seeking continuing education, the following courses offered by the University of Minnesota’s Onsite Sewage Treatment Program are MPCA-accredited as direct credits, with the exception of the pipe layer certification, which provides attendees with two direct credits and one related credit.
It is important to note that operators of large subsurface sewage treatment systems (LSTS) have 2.5 years from the issue or renewal of their state operating permit to complete all required training and certifications.
Take exams
Each certification course is followed by a separate examination. Several sources, including class discussions, Minnesota Rules 7080-7083, the Minnesota Manual for Septic Professionals, and Minnesota Public Service Commission design advice, were used to develop the true/false and multiple choice questions. During the test, you may use these materials and utilize calculators, but you may not use cell phones or laptops. Before the examination, you must present a valid picture identification card.
Failing an exam
The test for each certification course is distinct from the others. Several sources, including class discussions, Minnesota Rules 7080-7083, the Minnesota Manual for Septic Professionals, and Minnesota Pollution Control Agency design guidelines, were used to develop the true/false and multiple choice questions. These materials and calculators are permitted during the examination, however cell phones and computers are not permitted during the examination. Before the examination, you must present a valid picture ID.
- Attend the test session for the soils pre-certification course
- And Make an appointment with the MPCA SSTS program personnel to take the repeat exam. On the day of the examination, hand in a letter of authorisation for a retake to the proctor.
Despite the fact that you did not pass an exam in one specialist area, you can still sit for an exam in a different specialty area. More information may be found at:
Get required experience
It is necessary to gather experience under the supervision of someone who is qualified as an inspector or in the area of certification you are pursuing before you may be certified (also known as your mentor). Mentors are not permitted to have had a violation that resulted in an MPCA enforcement action during the previous five years. You must perform all work for a government agency or an SSTS-licensed firm, either as an employee or as the owner of a business license of your own. You cannot work for yourself.
MPCA personnel highly advise you to apply for certification before beginning your experience in order to verify that your mentor is approved by the organization.
Document your experience and report it to the MPCA using one of the forms mentioned on this page.
Apply for certification
The MPCA will send you an SSTS application for professional certification (wq-wwists3-11) along with the letter announcing your test results if you pass a specialty area examination in that specialty area. You must submit an experience plan with your application, which should contain the following items:
- Signed by your mentor (the qualified individual with whom you’ll be working to complete your experience)
- The name of the business licensee or government organization that has agreed to take accountability for your work experience
The MPCA will send you a certification card with your certification number, the specialized area(s) in which you are qualified, and the date that your certification will expire if you meet the requirements.
Additionally, you will be mentioned in the Certified person listing of the SSTS search engine.
- SSTS Professional Certification Application (wq-wwists3-11)
- SSTS Professional Certification Application (wq-wwists3-11)
Restricted certification
In the event that you have filed for certification but have not yet completed the requisite experience, you will be issued a restricted certification. Each and every task must be completed under the supervision of a mentor (see Experience section above). Once the MPCA has approved the requisite experience, the agency will remove the limitation, and you will be able to practice law without restriction.
Renew certification
Following successful completion of a test, your certification is valid for three years. During the course of your certification, you must participate in SSTS-related continuing education. In exchange for your participation in continuing education courses, the training providers will mail a certificate of attendance to both you and the MPCA. The organization keeps track of your credits and will send you a new certification card once you have completed the necessary criteria. The expiration of your certification will occur if you do not fulfill your continuing education obligations on time.
Continuing education requirements
- A brief overview of onsite systems
- Installation of onsite systems
- And service providers.
- The following topics are covered: designing onsite systems, inspecting onsite systems, soils, intermediate designinspection of onsite systems, and advanced designandinspection of onsite systems
Installation professionals, designers, and other professionals are not required to take installer continuing education. Minnesota Regulations 7080-7083 are directly accredited, which indicates that the training incorporates both the administrative and technical aspects of the regulations. Check with your training provider to see what types and amounts of credits they are willing to accept on your behalf. If you have passed numerous tests, you are not obliged to add up the needed continuing education hours; the maximum number of hours required is 18 every three years if you have passed multiple exams.
Forms
Professional training organizations that provide SSTS professional training must seek for accreditation with the MPCA in order for their courses to be considered for inclusion in the agency’s individual certification program as pre-certification or continuing education training.
What do SSTS professionals need to know?
Work in progress materials that explain the tasks in which SSTS practitioners are anticipated to be proficient are provided below. In order to establish and constantly enhance the SSTS curriculum and tests, it is necessary to go through the job analysis process.
They are the result of the stakeholder-driven Need-To Know (N2K) process, which outlines what SSTS practitioners need to know in order to successfully and efficiently perform their profession. Nick Haig can be reached for comments on the N2K criteria or to join in N2K committees.
SSTS task analysis
- A fact sheet about the SSTS Design and Inspection Spectrum, two speciality areas that were created in 2013.