What To Do With Septic Tank After Hooking To City Sewer? (Perfect answer)

Once connected to a city’s sewer line, a septic tank that’s no longer in use must be drained, then either removed and crushed or filled in and reburied.


  • If you do plan on connecting to the city sewer line from a septic sewer, remember to safely abandon your septic tank. There are regulations to abandon your septic tank since they can be a huge safety risk.

Is septic tank better than sewer?

Although septic systems require a bit more maintenance and attention, they have a number of advantages over sewer lines. Since they don’t pump wastewater long distances to be processed at a water treatment facility, they use less energy overall and have a smaller environmental impact.

Can Ridex be used in city sewer lines?

If your home goes to a city sewer system, there’s no need to use Rid-X. The city manages the storage and treatment of household wastewater in that case. While technically Rid-X may help the plumbing in your house over time, it could also interfere with the city’s water management, so it’s best to avoid it.

What does Septic in and connected mean?

1. Main Drain Pipe. Like the sewer system, homes with a septic system have a main drain pipe underground that all the drains in the house are connected to. All this pipe does is get your wastewater where it needs to go. This pipe from the home is the first part of the system.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

Why septic tanks are bad?

One of the biggest disadvantages of septic systems are the hassles that comes with sewage backup, which is generally a sign of clogging in the tank or drain field pipes. When backups occur, the problem is more serious than a simple household drain clog because the obstruction won’t be found just inches down the drain.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

Can you put Ridex directly into my septic tank?

According to the EPA and the Ohio Department of Health, not only are additives like Rid-X not recommended, but they actually have a detrimental and potentially hazardous effect on your septic system’s waste treatment process.

How long does it take for Ridex to start working?

The enzymes in RID-X® begin working as soon as they come in contact with water. The bacteria take 2-4 hours to germinate and then begin to break down solid waste. If the temperature and conditions are favorable, then the bacteria will multiply to the maximum level that the environment will allow in about 2-4 days.

Is Ridex just for septic tanks?

According to Rid-X, this product can be used in all types of drains, from the kitchen sink to the toilet. All of these will flow directly into the septic tank where you can start your work.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

  1. Pooling water.
  2. Slow drains.
  3. Odours.
  4. An overly healthy lawn.
  5. Sewer backup.
  6. Gurgling Pipes.
  7. Trouble Flushing.

Does shower water go into septic tank?

From your house to the tank: Most, but not all, septic systems operate via gravity to the septic tank. Each time a toilet is flushed, water is turned on or you take a shower, the water and waste flows via gravity through the plumbing system in your house and ends up in the septic tank.

How often should a septic tank be emptied?

How Often Should I Empty My Septic Tank? To keep your sewage system running correctly, your septic tank needs to be pumped out or desludged every 1 -2 years. It is extremely important to keep your septic tank maintained.

How long does it take to pump out septic tank?

How long does it take to pump a septic tank? A septic tank between 1,000 – 1,250 gallons in size generally takes around 20-30 minutes to empty. A larger tank (1,500 – 2,000 gallons) will take about twice as long, between 45-60 minutes.

Do you really need to pump your septic tank?

Septic Tanks require regular pumping to prevent malfunction and emergency servicing. The most fundamental, and arguably the most important element required to maintain your septic system is regular pumping of the septic tank. Most experts recommend pumping the septic tank every 3 to 5 years.

How to Switch from Septic to Sewer

This entry was posted on April 24, 2019 Last month, I provided information on how to keep your septic system in good working order. A septic system is the most cost-effective and self-sufficient type of drainage system available today. If properly cared for, it will endure an endless amount of time. However, despite the fact that septic systems are long-lasting and efficient, they do have certain disadvantages. Maintaining a septic system necessitates the observance of extremely strict criteria.

This is one of the reasons why many property owners with septic systems eventually contemplate the installation of a municipal sewage system.

However, there are several critical prior procedures that must be completed before you can get started.

  • Consult with your city’s public works department to see whether or not a city sewer connection is accessible for your use and convenience. The fact that even if the pipes are already in place, there are still expenses associated with connecting a property to an existing system is vital to keep in mind. get the appropriate approvals for the project’s implementation Engage the services of a dependable plumber to manage the connection between your property and the closest sewage line.

If you’ve ever witnessed your septic tank being pumped, you know that the tank is packed with waste, untreated water, and other toxins that might pose a threat to your health or the environment. Septic tanks that have been linked to the city’s sewer system must be emptied and then either removed and crushed or filled in and reburied once the connection has been made. If you’re interested in learning more about moving over, or if you’re ready to make the transfer, please get in touch with us immediately.

They can give the most thorough information possible on costs, procedures, and laws.

When Does It Make Sense To Switch From Septic to City Sewer

How Do I Know When It’s Time to Make the Switch From Septic to City Sewer? Connecting to the City Sewer System All households deal with wastewater in one of two ways: either via the use of a sewage-disposal tank or through the use of a sewer line. Despite the fact that each has its own set of pros and disadvantages, most homeowners are unable to pick between the two alternatives. However, there may be instances in which making the right decision is advantageous. As cities grow, sewage lines are beginning to reach into new areas, giving current residents the option of connecting to the city’s main public sewer system, which is becoming more widespread.

  1. However, homeowners with modern septic tanks have a difficult decision when determining whether or not to convert their tanks in the majority of these instances.
  2. For those who are currently in possession of a septic system that requires repair or replacement, it can cost thousands of dollars to construct a new tank, which is equivalent to the cost of connecting to the municipal sewage system.
  3. If your septic system is in excellent functioning shape or was very recently installed, switching to a public sewer system will not provide any significant short-term advantages.
  4. If you wish to connect a septic sewer to a city sewage line, be sure that your septic tank is properly disabled before proceeding with the connection.
  5. If children or animals manage to break open the cover of an old, disused septic tank and fall into the potentially lethal contents, a potentially fatal hazard is created.
  6. In addition to installing a brand-new sewer line to connect your home to the public sewage system, a contractor can empty and either remove or deactivate your existing septic tank, depending on your needs.
  7. So, if you’re trying to decide between two options, what should you do?

What Is the Difference Between a Septic System and a Sewer System?

The fact that sewage lines link to public sewer systems means that they are often only available in urban areas where they are needed.

Several Benefits of a Public Sewer Line As long as your home is linked to the public sewer system, you shouldn’t have to worry about anything else other than paying a regular monthly wastewater bill to the city.

Because sewer lines are often designed to handle more wastewater than septic tanks, they are less prone to clogging than septic tanks are.

A well-maintained septic system may survive for decades, but the tank must be pumped out on a regular basis, usually every 3 to 5 years, in order for it to function properly.

In light of the fact that sewage-disposal tanks collect and treat water on your home or business property, any malfunctions might result in your grass becoming an unpleasant puddle.

In certain localities, a sewer connection is necessary in order to obtain approval for the building of a swimming pool or the renovation of a large portion of a home.

Because they do not transport wastewater across borders to be treated at a water treatment facility, they consume less energy in general and have a lesser environmental impact.

With the exception of the ongoing expenditure of pumping the tank every couple of years, septic tanks are quite inexpensive to maintain after they’ve been constructed.

The installation of a septic system provides a great deal of independence and security if you do not want to rely on the municipal sewage system for your waste disposal.

What is the difficulty level of converting to a sewer system?

Actually, connecting your home to the public sewer system is a reasonably simple operation that takes no more than a couple of days to complete and only causes minor disruptions in wastewater service for a few of hours at the most.

Typically, the most important factor to consider is the price.

Along with labor costs, the majority of towns impose a significant price for connecting to the public sewer system.

South End Plumbing specialists in city sewer hookups, so keep in mind that we are only a click away if you have any questions.

We also specialize in leak detection; please contact us for more information. South End Plumbing is one of the few organizations that will provide you with a no-obligation quote. To book a visit, please call us at 704-919-1722 or complete the online form.

Should I Convert From A Septic System to a Sewer System

Every residence disposes of wastewater in one of two ways: either through a septic tank or through a sewer system. Despite the fact that each has its own set of pros and disadvantages, homeowners are rarely in a position to pick between the two options. As cities grow, however, sewage lines are beginning to be extended into new areas, giving present residents the choice of connecting to the public sewer system for the first time. For homeowners with older or failing septic systems, this is a fantastic chance to save exorbitant replacement expenses; however, homeowners with modern septic systems have a tough decision about whether or not to convert their systems to biosolids.

Before any major decisions are made by a homeowner, it is critical that they grasp what a sewer and septic system are and how they vary from one another.

Septic Vs Sewer: What’s The Difference?

Identifying the advantages and disadvantages of these two types of wastewater systems can aid in determining whether or not to switch from a septic to a sewer system. Due to the fact that sewage lines link to public sewer systems, they are often only available in metropolitan settings. Septic systems are an alternative for residences located in rural locations where there may not be a sewer system to which they may be connected.

Advantages of a Public Sewer Line

Once a residence is linked to the public sewer systems, you normally don’t have to worry about anything beyond paying a monthly wastewater charge. Maintenance and repairs, as well as the resolution of any issues that may arise, are the responsibility of municipal water departments. Because sewer lines are normally designed to handle more wastewater than septic systems, they are less prone to clogging than septic systems. And, while you should always be cautious about what you flush down your pipes, sewage systems are often more resilient than septic tanks in terms of withstanding misuse.

See also:  How Much Does A 100 Gallon Concrete Septic Tank Weigh? (Solution found)

In addition to the financial burden, scheduling these cleanings can be a constant source of frustration.

This is a worry shared by many prospective house purchasers, who insist on the connection of properties with septic systems to the municipal sewer system as a condition of the sale.

Advantages of a Septic System

Despite the fact that septic systems require a little more upkeep and attention, they provide a number of advantages over traditional sewage lines. Given that they do not transport wastewater a significant distance before being treated at a water treatment plant, they consume less energy overall and have a lower environmental effect. Additionally, the bacteria in septic tanks decompose and treat wastewater on a local level, considerably minimizing the likelihood of leaks occurring between the residence and a local treatment center.

There is no monthly charge to pay, and any disruptions to the municipal sewer system have no influence on the septic systems in place in the homes that are affected.

The installation of a septic system gives a great deal of freedom and security for those who do not wish to be dependent on the municipal sewer system.

How Hard Is It To Convert To A Sewer System

Following your choice to convert, you may be asking how to connect to the city’s sewer system. Although it may seem complicated, connecting your house to the public sewer system is a pretty straightforward operation that takes no more than a few days to complete and only causes minor disruptions in wastewater service. However, there is a significant amount of labor-intensive work involved, which may be fairly expensive. The pricing is typically the most important factor to consider. Installing public sewer lines requires a significant investment in infrastructure on the part of local governments, and as a result, the service is not supplied for free.

Fees can range from a few hundred dollars to several thousand dollars based on the accessibility of the nearest sewage line, as well as the permits required to complete the construction and inspections to establish the household’s projected wastewater production.

When Should You Convert To A Sewer System?

A new tank can cost up to several thousand dollars to build if your present septic system is in need of repair or replacement. This is equivalent to the cost of connecting your home to the municipal sewage system. The changeover is generally a good idea in such situation, especially if you have plans to improve your home in the future, such as installing a pool or listing the property on an estate agent’s website. The switch to public sewer, on the other hand, isn’t very advantageous if your septic system is in good operating shape or was recently installed because there isn’t much of a short-term gain.

If you do want to connect to the city sewer line from a septic sewer, make sure to properly decommission your septic tank first before proceeding.

If children or animals are able to pry open the lid of an old, unused septic tank and fall into the toxic contents, they can pose a potentially fatal hazard to their lives.

In addition to installing a new sewer line to connect your home to the public sewer system, a contractor can drain and either remove or disable your old septic system, depending on your needs.

Are you contemplating connecting to the public sewage line? Do you have a septic tank that is no longer in use? Consult with the experienced plumbers at Express SewerDrain for their recommendations! Topics:Sewers

Can I Connect to a City Sewer If I Have a Septic Tank?

Once-rural regions are being absorbed into metropolitan areas that are growing in size. As a result, many homeowners choose to connect their septic tanks to the municipal sewage system. Both sorts of systems have their advantages and disadvantages. Following are just a few of the reasons why individuals decide to connect their septic tanks to the public utility system.

Septic Tanks Versus Sewers

An underground septic tank is installed on a homeowner’s land. Bacteria in the tank decompose trash, which is then recycled back into the groundwater by the tank’s circulation system. Homeowners are responsible for the care of their septic tanks, which includes regular pumping. Unfortunately, septic tanks sometimes experience problems. The homeowner is accountable for any environmental damage and cleaning that happens, and may even be required to pay a fee if an issue arises as a result of it.

Paying for municipal sewage treatment might actually end up being more expensive over time for many households; nevertheless, it eliminates the inconvenience and expense of maintaining septic tanks.

Making the Connection

For those considering connecting their septic tank to a sewage line, the first step is to contact the local municipal authorities to see whether a sewer line is located close enough. Following that, you’ll need to secure the essential building permissions. Some municipalities will cover the cost of the connection; otherwise, loans and grants for septic system rehabilitation are frequently available. Find a trustworthy plumber to design and install the connection between your tank and the nearest sewage line.

Depending on the weather, it might take up to a year to complete the job completely.

Contact The Pink Plumber if you have any questions regarding your septic system or if you are ready to make the switch to the municipal system.

Our experienced staff will be there to help you through the process and guarantee that the job is finished correctly and on schedule.

Septic to Sewer Conversion page

Septic to Sewer Conversion admin2019-10-30T13:24:07+00:00 Septic to Sewer Conversion

Septic to Sewer Conversion:What You Need to Know…

Most cities and towns, as well as their immediate surrounding regions, will be served by sewer systems that are managed by the local public works department, unless otherwise specified.

If a community is located outside of the area served by the municipal sewage system, the residences will typically rely on a septic system to manage waste water collection and disposal.

Septic Tank Decommissioning

To decommission your septic system and connect to the municipal sewage system, you must employ a professional plumbing contractor who will ensure that correct decommissioning procedures are performed. The protection of our health, safety, and the environment will be enhanced as a result of this. Septic tanks are bursting at the seams with untreated effluent. Wastewater is teeming with pollutants such as bacteria, viruses, parasites, and nitrates, all of which have the potential to cause sickness as well as other health and environmental issues.

  • First Almost Every Service Both the plumber and the homeowner are responsible for obtaining the relevant permissions.
  • It is not inexpensive, but keep in mind that the town spent a significant amount of money and labor laying the new sewer line along your street.
  • Septic tanks that have not been properly decommissioned might likewise pose a threat to public safety.
  • When the lid of an abandoned septic tank collapses, it has resulted in significant injuries and even deaths for those who fall into it.
  • By employing a professional plumbing contractor, homeowners can rest certain that the health and safety of their family will be safeguarded.

Septic Tank to Sewer Conversion

It is theoretically a relatively simple procedure to convert your home from one that utilizes a septic system to one that utilizes a municipal sewer system. Excavating the waste pipe between the home and septic tank, intercepting and re-routing the waste to the sewer main by taking the path of least resistance is performed by a certified construction contractor. Most communities do not compel you to connect your septic system to a public sewage system, and if you have a modern septic system, it may be preferable to simply wait.

In addition, the sewer line is low-maintenance and hassle-free.

When a house is on a septic system but sewer is accessible, new purchasers frequently use this as leverage against the seller.

There is another advantage in that certain cities are NOT septic-friendly and will frequently refuse to allow repairs to a septic system when sewage is readily available.

Aside from that, some cities will not allow pools, room extensions, or remodeling when the property is on septic when sewer is readily available.

Requirements for Septic Tank Abandonment Code

In order to properly decommission wastewater disposal systems, the sewage must be removed from the septic tank by a licensed septic tank pumper, and the tank must either be crushed in place or completely filled with compacted soil, concrete, or other approved material, as specified by the Uniform Plumbing Code. It may also be necessary to disinfect the place, depending on the individual conditions. While it may not always be in your best interests to leave your septic tank if it is still in pretty excellent working order, it may be in your best interests to do so if it is still in relatively good working order.

If you haven’t had any problems with your septic system in the past, make sure to thoroughly consider all of the fees associated with it.

It is possible that the cost of septic tank abandonment and sewer access will be significantly more than the cost of fixing your system or even replacing your existing septic tank if your system is experiencing problems.

Septic Tank Removal Contractor

Septic to sewer conversion is something that All Service Plumbing specializes in providing. In addition to plumbing repair and drain cleaning, we also provide septic system installation and maintenance across Los Angeles County and the neighboring areas. To learn more about our services or to make an appointment, please contact us right away. We’ll send a qualified plumber who has been certified by the Los Angeles County Department of Building and Safety to assist you with plumbing leak detection or any other plumbing related issue.

Septic to Sewer Conversion Project Snapshot By Ultimate Plumbing

You’re probably familiar with all of the classic jokes and misconceptions about plumbers by now. For the most part, people believe that a plumber’s only skill is twirling wrenches to fix a leaky faucet, a shattered shower head, an obstructed toilet or even a ruptured pipe. Plumbing repairs can be as easy as switching out a P-trap or a washer, or as complex as replacing a piece of pipe that has been broken.

But sometimes, being a plumber means rolling out heavy equipment and performing a major construction project!

Ultimate Plumbing recently got a request to connect a customer’s septic system to the city’s sewer line, which they gladly obliged. Customers with existing septic tanks who wished to get rid of them and create a new sewer drain connection with newly built city sewers were welcome to do so at no additional cost. These situations are growing increasingly widespread as urban infrastructure, such as sewage lines, expands and aging or broken septic systems become more prevalent. Residents in certain locations don’t have a choice between maintaining their septic system or switching to municipal sewage service, and with the increase in urban expansion, it just made more sense to make the conversion now rather than waiting for the old system to fail.

  • We got right to work as soon as it happened.
  • After they had mapped out the area and we had determined where to dig, we brought in heavy equipment in the shape of a mini-track hoe or “shovel” to help us construct a trench for them.
  • As a result, the home was protected from both structural damage and soil pollution.
  • That is not something you want in your drinking water!
  • Then we made modifications to the septic tank to allow for a connection to the city sewage line to be installed.
  • We had to lay the pipe that would link the home to the sewage line at this position since the sewer connection had been exposed at this point.
  • We could now turn the water back on and provide the customer with their first flush of the toilet.
  • Using a “jumping jack,” which is just a jackhammer with a flat metal plate on the bottom, we compacted the surrounding dirt at a very high cyclical rate, directing huge pressure downward at a very high pace.
  • After a short pass over the top with the track hoe to ensure that everything remained solid, we were ready to depart, having left another pleased client in our wake.
  • Everything went off without a hitch, and the customer was really delighted with the final result.
  • For further information, please see our Septic to Sewer Conversion FAQs, which may be found at the bottom of this page.

For plumbing repairs, from a leaking showerhead to an emergency burst pipe repair to a total overhaul of your present sewage disposal set-up, please click here to call Ultimate Plumbing now!

Frequently Asked Questions About Septic Sewer Conversion

Answer: Because of worries about the long-term environmental effect of septic systems and drain fields, many communities are seeking to phase them out in favor of confined sewer systems, which provide less of a danger of groundwater pollution and other issues to be concerned about. This necessitates the conversion of the old septic system or, if the system has failed, the removal of the system and the installation of a link to the city sewage line. In most circumstances, you will need to submit an application for the relevant permits, hire a contractor to do the work according to local specifications, and complete payment of any fees when the work is completed.

See also:  What Is Worse On A Septic Tank Shower Or Washer? (TOP 5 Tips)

For further information, please contact us by clicking here.

Question: How much does it cost to connect to a public sewer? –Edith, Denver, NC

Answer: This is dependent on several things, including:

  • It is necessary to determine whether there is an existing tap that allows connection to the line, or whether a new tap must be constructed. Regardless of whether you have a sewer or a septic system in place
  • Whether the connection just needs to be fixed or has to be completely reinstalled
  • In rare circumstances, the location of the city sewage line might have an influence on the cost of the connection. Whether it’s a home, a business facility, or an industrial connection, we can help. Your geographical location (for example, Denver has some rules and regulations that are different from Charlotte, which is different from Mooresville, and so on)
  • Whether or not there is a city sewer system in your neighborhood

In rare cases, the city may not have provided sewer connection to your site due to a lack of funding. To have your septic system repaired or replaced in this situation, you may need to get a septic permit from the local government. Make sure to visit the website of your local public utilities if you want to learn more.

Question: Is there a cost to hook up to a public sewer line? –Heinrich, Mooresville, NC

Yes, it is correct. In addition to the criteria described above, there are a number of other considerations that might influence the cost and availability of sewer connections. As a general rule, most municipalities demand that you pay a connection fee if you are connecting to a public sewer system for the first time. Each jurisdiction has a unique set of laws, regulations, and procedures that must be followed. As an authorized sewer line installation and connection contractor in the state of North Carolina, Ultimate Plumbing is licensed, bonded, and insured to work in accordance with state and local regulations, as well as applicable building and plumbing codes.

Question: How can I connect my septic system to the city sewer? –Blaine, Charlotte, NC

According to the age and type of system you have, connecting your septic system to city sewage lines might be a fairly straightforward process, or it could be completely unnecessary and not worth the effort and expense. If your septic system is malfunctioning or has failed, it is usually not worth the effort to convert it; you would be better off simply removing it and starting over with a new sewer connection instead. For systems that aren’t too old, in excellent health, and running well, converting them can actually be a less expensive and time-consuming option than completely overhauling them.

Even if you are successful in obtaining the necessary licenses, one oversight might result in a significant problem and inquiries from people you would prefer not to deal with, such as the Environmental Protection Agency.

In order to connect your sewage line to the mainline and ensure that the task is done correctly the first time, it is significantly better, easier, and less expensive to use specialists like Ultimate Plumbing.

Question: Can you still keep your septic tank and use city water? –Laurel, Lake Norman, NC

Answer: It is possible, depending on the type, age, and location. In reality, a large number of people do this. Some individuals, particularly in rural and exurban regions, still use well water and septic systems, which are becoming more rare. The difficulty is that if your septic system fails, there is no way to fix it other than to start from scratch. An underground home to street sewage connection consists of digging out one run of pipe, repairing or replacing it, then covering it up again.

As infrastructure evolves and becomes more affordable, more durable, and more cost-effective to build, many communities around the country are now eliminating septic systems entirely as a viable alternative altogether.

Make sure to visit the website of your city’s building or water department for further information on this.

Question: How can I find out if sewer is available in my area? –Breck, Mooresville, NC

You should be able to get such information from your local public utilities commission, City Hall, water department, or building department. Many locations offer free services to determine whether or not sewage service is accessible in your neighborhood, and many of these locations also offer interactive web maps that depict the scope of utilities such as gas, water, and sewer lines. For further information, contact one of the organizations listed below in your region.

Some jobs are simply too big to tackle on your own, such as connecting your house to city sewer service.

  • A plumber’s job, on the other hand, may require the deployment of heavy equipment and the completion of a large-scale building project. FAQs about Septic to Sewer Conversion
  • Question: I recently received a notification from the city stating that I am required to change from septic to municipal sewer service. Is it possible for them to do so? –Edwin from Mooresville, North Carolina
  • Question: What is the cost of connecting to a municipal sewer system? –Edith, Denver, North Carolina
  • Question: Is there a fee associated with connecting to a public sewer line? The following is a question from Heinrich of Mooresville, North Carolina: How can I connect my septic system to the city sewer? –Blaine from Charlotte, North Carolina
  • Question: Can you keep your septic tank and use municipal water at the same time? In response to Laurel’s question, “How can I find out whether sewer is accessible in my area?” in Lake Norman, NC: –Breck from Mooresville, North Carolina
  • A few tasks are simply too large for you to complete on your own, such as connecting your home to the city’s sewer system.
  • Therefore, we recommend that you use specialists, like as our team at Ultimate Plumbing, to ensure that the task is done correctly the first time, every time. If you would like to learn more about converting or customizing your septic system to operate with city sewer service, please contact Ultimate Plumbing via the link provided. Good luck with your flushing

Should I Convert from a Septic to Sewer System?

The subject of alternative waste management is one that everyone enjoys talking about. From septic tanks to sewer systems, the method by which you dispose of human waste and water from your toilets, showers, dishwashers, washing machines, and floor drains is sometimes a question of personal preference and other times a function of where you live in relation to the disposal system. Understanding how both waste management solutions work and how they affect your house is essential knowledge for any homeowner, regardless of which system they presently have.

Septic vs. Sewer Systems: Is One Better Than the Other?

If you’ve already done your research, are you still undecided about which choice is the best fit for your situation? Actually, depending on where you live, both solutions offer advantages and disadvantages that must be considered. Listed below are a few key distinctions between the two solutions, along with some illustrations of why some homeowners choose one option over the other. Septic Tanks are a type of septic tank that is used to dispose of waste. Septic systems are regarded to be somewhat more ecologically friendly than other types of systems since they do not require the use of chemicals to purify the water.

To keep them in good working order, however, septic tanks must be pumped out every 3 to 5 years, or even more frequently if the tank is very large or if a large volume of wastewater is generated within the property.

System of Sewers Compared to other types of plumbing systems, sewage systems require less frequent maintenance from the homeowner and are less sensitive to non-human waste that is often flushed down sewer pipes.

Sewage systems, on the other hand, are not free, and households will have to pay for their sewer service in the same way that they do for water and electricity.

A septic tank that is malfunctioning, whether due to an overflow or a simple defect, is the full duty of the homeowner to deal with and rectify.

Can You Switch from Septic to Sewer?

Making the transition from a septic system to a sewer system is certainly achievable, but it must be done in the appropriate manner to minimize needless difficulties. If you are considering making the switch from septic to sewer, the first step is to get in touch with your local municipality to see if a sewer line runs close enough to your home or property to make the switch possible. If a sewer line does run close enough to your home or property, the switch will be possible. As soon as it has been determined that it is possible, the following step is to secure the required building licenses in order to avoid any municipal infractions and potential fines related with unlicensed construction projects in the future.

Connecting your home to the public sewer system may appear to be a complicated and time-consuming operation, but it is actually a pretty straightforward procedure that takes only a few days to complete if you plan and approach the installation process properly.

Invisible Excavations is a company that specializes in underground excavation.

How to Connect Sewer Line to City

It has already been announced that the first order of business is to get all of the appropriate licenses in order to begin working on the project. This will include any tie-in fees that your municipality charges to connect to the existing sewer line; however, a professional plumbing and excavation expert can assist you in determining what type of connecting pipe is required and what initial costs are required to complete the project successfully. Here’s a more detailed overview of what you’ll need to do in order to connect to the city’s sewer system:

  • Once the necessary licenses have been secured, it is time to begin excavating the line. Your plumbing professional will often begin by digging down along the road in order to locate the “stub,” or short portion of capped pipe, that has been lodged beneath the earth.
  • The new line can hook into the existing stub rather than having to cut into the main sewage line, which would be more difficult
  • When the capped pipe is discovered, an elevation check is performed to confirm that the sewage line has the proper pitch, which is typically two inches of fall for every ten feet of pipe.
  • As previously said, the plumbing and excavating specialist you employ should be well apprised of the situation.
  • It is then necessary to dig a trench that will go from your residence to the connecting pipe segment
  • After that, the pipe is installed, beginning at the road and ending at your residence. This is done in order to reduce the amount of time you are without sewer and to make the procedure a little easier to handle

The construction of a sewer line requires cleanouts every 90 feet of pipe, and there may be extra measures necessary depending on where your property is located, such as laying stone around the pipe throughout the installation.

Invisible Excavations Takes the Guesswork Out of Connecting to City Sewer Lines

In addition to providing experienced sewer pipe repair services with the Cleveland and Northeast Ohio locations, we can assist homes in transitioning from a septic to a sewer system as fast and affordably as feasible. We can assist you in getting the ball moving because we have been in the plumbing and excavating business for a long time. We are committed to providing a streamlined, competently run process, and we stand by our work at all times. Let’s get in touch with each other today: Get in Touch With Us Today!

Learn how much it costs to Install a Sewer Main.

On August 27, 2021, an update was made. Jeff Botelho, a Licensed Journeyman Plumber, provided his review. HomeAdvisor has contributed to this article.

Sewer Line Installation Cost

The average cost of installing a new main sewage line is $3,237, with a usual range of $1,330 and $5,193 for the project. Once the plumber has installed the line, you may be required to pay an extra $500 to $20,000 for connection to the city sewer system. Cities establish tariffs based on the availability of local water resources and the present configuration of the roadway. In order to ensure the proper operation of sewer mains, you must work closely with your local waste treatment authority.

The city may be responsible for a portion of the expenditures associated with connecting your home’s pipes to the public sewer system.

Depending on the location, this task may necessitate the employment of a plumber to connect the home to the sewage line, but the municipality or a separate sewer contractor to connect the house to the city sewer main located in the street.

Sewer Main And Line Installation Cost Calculator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

See also:  Why Do You Have To Get Your Septic Tank Pumped? (Question)
National Average $3,237
Typical Range $1,330 – $5,193
Low End – High End $244 – $9,000

The cost information in this report is based on real project costs provided by 2,948 HomeAdvisor users. In most cases, the cost of installing a sewage line is between $50 and $250 per linear foot. New pipes range in price from $3 to $20 per foot, with labor costs ranging from $30 to $247 per foot. Trenching may or may not be included in the price of this service.

Cost to Install New Main Sewer Line

The average cost of installing a main sewage line is around $2,900. The following are some of the elements that may influence the cost of installing a sewage line.

Task Total Cost Including Labor
Sewer Line Per Foot $50 – $250
Trenching $800-$4,000
Backflow Preventer $150 – $1,150
Sewer Cleanout $2,000
Hookup $500 – $20,000


The expense of digging a trench is around $800 per 100 linear feet. The entire cost is determined by the length and depth of the trenches that are required. This pricing does not normally cover the cost of removing landscaping or hardscaping prior to digging.

Backflow Preventer

A backflow preventer installation costs between $125 to $900, plus $25 to $250 for labor. Using a backflow preventer, you can ensure that waste is directed toward the city sewage system and away from your property.

Sewer Cleanout

The average cost of installing a sewer cleanout is $2,000 dollars. This estimate is normally inclusive of pipes and materials, as well as equipment, tools, and manpower. This is an entry point that plumbers use to unclog obstructions in the pipework system.

Sewer Hookup Cost for a Septic System

The average cost of a septic system installation is $6,700, with prices ranging from $3,000 to $8,500. In general, this job will cost more than the normal $2,900 for a new sewage system installation.

Get Estimates From a Sewer Line Installer

Depending on municipal laws, a connection to the city’s water and sewer system might cost anywhere from $500 to $20,000. To determine how much of the work will be subsidized, the city must first determine how much work will be financed. Some places demand higher fees as a result of shortages of supplies and inadequate infrastructure. Others are less expensive, allowing new development to be more affordable. To find out what the restrictions are in your region, speak with a local sewage professional.

Who Foots the Fee to Tie Into the Public Sewer?

In most cases, landowners are responsible for making improvements to their property. This fee may be included in the cost of the home if it is being built from the ground up. You will typically be responsible for the cost of replacing a sewage line in an existing house unless you have a construction loan.

Average Cost to Hook Up to City WaterSewer

Although the cost of connecting to the city, which ranges from $500 to $20,000, often includes water and sewer hookup, it does not always cover the cost of installing either line. The average cost of installing a water main is $1,600. In many circumstances, the plumber will be able to assist you with both tasks.

Contact a Pro To Connect Your Sewer Main to the City

Who is responsible for the expense of sewage line installation is determined on the type of home you own. In most cases, property owners can anticipate the following arrangements:

  • Single-family homes are covered by the homeowner’s insurance. Owners have agreed on a price for a twin house. The owner of the duplex is responsible for the insurance. Townhome or condominium: Covered by the HOA, which may result in an increase in costs.

If you’re looking for further information about your area or housing development, you should contact your municipality.

Distance to Connector Line

Laying a new line costs$50 to $250 per foot.

The distance between your home and the connector line affects this price. The further away it is, the more pipe that will need to be installed, which increases material and labor costs.

City PermitsRegulations

Permits to connect to the city sewer system cost between $400 and $1,600, with an average cost of roughly $1,000. The cost is determined by the restrictions established by the sewage authority in the region. You must get them well in advance of the project’s start date. If your installation is not within the supervision of your municipality, see a plumber to find out what you need to do. Some professionals can assist you in obtaining the necessary permissions, but you may be required to do so yourself.


Anything that could come in the way of the digging process will raise the overall cost of construction. Consider the following jobs that are frequently associated with sewage line installation:

  • Landscaping installation costs $3,400
  • Tree removal costs on average $750
  • Driveway repair costs $1,700
  • Patio resurfacing costs $1,400
  • And other expenses.

Inquire with your plumber to see if there is any way they can avoid performing these property repairs before proceeding. If it’s inevitable, you may need to engage a landscaping or hardscaping specialist to help you with these projects.

Switching from a Septic to Sewer Cost

Transforming your property from a septic system to city sewer might cost as much as $6,000 or more in labor and material costs. In addition to the cost of installing and connecting the line, you’ll have to pay to have your septic tank decommissioned as part of the process. A greater total is likely if your job includes trenching beneath the foundation or installing new pipes within your residence.

Task Cost
Permits $1,000
Decommission Septic Tank $500 – $1,000
Install New Sewer Line $2,900
Trench Under Foundation $150 – $200 per foot
New Pipes Inside Home $1,050

Decommissioning a Septic Tank

The expense of putting your septic tank out of service ranges from $500 to $1,000, and it must be done correctly to minimize property damage. The majority of professionals advise draining out the tank and replenishing it with a stable substance such as sand. Although it is possible to remove the tank, most homeowners prefer to keep the landscape as unaffected as possible.

Under-Slab Trenching

Trenching costs between $150 and $200 every square foot under your foundation. If your current pipes are placed beneath your home, you may need to do this additional step. When compared to digging a simple trench somewhere else on your property, this work takes extra caution to ensure that your foundation is not damaged.

Install New Plumbing Lines

The cost of installing new plumbing lines is around $1,100 on average. Switching from septic to sewage may need the rerouting or installation of new pipes to connect to the public sewer system.

Get a Quote From a Plumbing Professional

The following fees will be charged if you are replacing an old sewage line:

  • The cost of trenching ranges from $50 to $250 per foot, whereas the cost of trenchless line replacement is from $60 to $200 per foot.

The entire cost might range from $7,000 to $25,000, depending on the circumstances. The cost of removing and replacing old pipe might rise as a result of this. It is possible that the current sewage line is located below your gas line, making it more expensive to replace. Rather than digging a new trench, a plumber installs a smaller pipe within the existing plumbing system. Many homeowners like this procedure since it avoids the need for a complete excavation, but it is not ideal for all properties.

DIY Installation vs. Hiring a Pro

When it comes to sewage line installation, you’ll virtually always need to contact a licensed professional plumber. A poorly executed project might have devastating effects for both you and your neighbors if it is not completed correctly.

Residents who do not have confirmation that they are working with a licensed expert may be denied the ability to get building permits for the work in some situations. To get a quote, look for a plumber in your neighborhood.


You’ll almost always need to hire a plumber to install and connect your new sewage line, so plan ahead of time. It is possible that the plumber will offer other services such as landscaping or excavation, or that he or she will recommend that you employ another professional.

How do I calculate sewer piping needed to run from house to street?

The depth of a city main divided by the distance between the residence and the main will give you an estimate of how many feet of pipes you’ll require. This does not include the additional feet required to navigate around obstacles such as tree roots or power cables. In order to reduce the possibility of backflow, city sewage lines are typically laid lower than other plumbing or utility lines. As a result, this value may be larger than you think.

What’s the estimated cost for a sewer RV hookup installation?

The cost of hiring a plumber ranges from $45 to $200 per hour, including materials and equipment. The cost of installing a sewage hookup for an RV is determined by the degree of difficulty of the project. In most cases, you’ll pay less if you’re connecting to an existing line on the property rather than having to construct a new line from scratch.

What’s the average cost of an overhead sewer?

The cost of installing an above sewer is between $8,000 and $10,000. This sort of system makes use of pipes that are positioned above ground to reduce backflow into a basement.

Hire a Sewer Installation Pro Today

Some areas are so dry and hot that a septic system is an absolute need. If you currently have a septic system, you may be wondering when you will be able to upgrade to a sewer system, or vice versa. If your neighborhood is slated to receive plumbing to connect to a local sewer line, these questions will assist you in determining whether or not you should participate.

Why Convert to a Sewer System?

An aseptic tank is a wastewater filtering and removal system that is self-contained. If you take good care of it, it may survive for decades with only a tank flush every 1-3 years if you maintain it correctly. A septic tank, on the other hand, necessitates extra caution when it comes to what goes down the toilet. Depending on the extent of the damage to the drain field, you may be required to pay to have the septic tank relocated to a different location on your property. When a sewage line is available, it may make sense to at the very least consider allowing your municipality to take over the responsibility of wastewater removal from your residence.

Is a Sewer Line Available on Your Street?

The availability of a sewer line is the most important sign of your ability to make the transition from a septic tank to a sewage system. Septic tanks may be required if you live in a rural region or if your home is not connected to the public sewer system. However, over several years, as the region grows in population and development, municipal planners begin to install sewer lines in a wider variety of streets. If a sewage line has been constructed on or near your property, you may be allowed to connect your home’s plumbing to the sewer line if it is located on your street or very close to your property.

Can You Obtain the Necessary Permits?

Before you begin the process of connecting your property to the city’s sewer system, you must ensure that you have obtained all of the necessary permissions. Any time you intend to dig into the earth, particularly if the digging will take place in an area that is outside of your property, you must notify the appropriate authorities. Inviting telecoms and utility providers to your property to indicate the position of underground pipelines is an excellent idea.

You will avoid mistakenly cutting into one and causing service to be disrupted for the entire neighborhood in this manner. Inquire with your Sacramento plumbing professional about the kind of pipes that will be necessary to connect your home to the city’s main line.

Do You Have the Money to Pay the Hookup Costs?

The cost of connecting to a sewage line is high. Consider the following scenario: Depending on the size of the city, it might cost tens or hundreds of thousands of dollars in labor, equipment, and materials to put up a sewage line in a residential area. You must contribute a portion of your income in order to be a part of the system. The cost of hook-up fees may run into the thousands of dollars. In order to maintain service after the first connection, you will have to pay a monthly subscription for the service.

You can assess whether or not you are prepared to make the adjustment based on your answers to these questions.

Leave a Comment

Your email address will not be published. Required fields are marked *