A new septic tank system costs $3,918 to install on average, with prices ranging from $1,500 to upward of $5,000. Most homeowners spend between $3,280 and $5,040 for a 1,250-gallon system that supports 3 or 4 bedrooms.
Septic Tank System Cost.
| National Average Cost | $3,918 |
|---|---|
| Maximum Cost | $15,000 |
| Average Range | $3,280 to $5,040 |
1
- In general, most homeowners pay around $3,138 to $8,518. However, a larger tank or more complicated system could result in a high-end cost of around $18,163. A septic tank for a particularly small home might cost as little as $1,013.
How much does it cost to add a riser to a septic tank?
How Much Does a Riser Cost? Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400 to install, parts and labor included.
How long does a raised septic system last?
Mounds and septic systems designed and installed prior to the year 2000 AVERAGE 20 to 25 years of useful life prior to failing and needing to be replaced. Many systems fail sooner than 20 years, and many last well beyond 25 years, the AVERAGE is 20 to 25 years.
Why do I need a raised septic system?
The purpose of a mound septic system is to keep the waste product away from the water table. The water table has to be maintained, and a damaged septic tank is a quick way to contaminate it. The mound septic system does a great job of protecting the water table and sometimes more so than other septic tank measures.
What is a raised septic system?
A raised septic system [or raised bed septic system] is an absorption trench system constructed in fill material with acceptable permeability placed above the natural soil on a building lot.
Do they make square risers for septic tanks?
The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.
How big of a septic tank do I need?
The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.
How often should I clean my septic tank?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
How long does a 1000 gallon septic tank last?
A septic tank depends largely on the pump and the family usage. That is, a 1,000-gallon tank would most likely last more than 20 years (on average), while a 500-gallon tank might only last 10-15 years under similar conditions.
What is the alternative to a septic tank?
Mound systems work well as alternatives to septic tanks when the soil around your home or building is too dense or too shallow or when the water table is too high. Although they are more expensive and require more maintenance than conventional systems, mound systems are a common alternative.
What are the 3 types of septic systems?
Types of Septic Systems
- Septic Tank.
- Conventional System.
- Chamber System.
- Drip Distribution System.
- Aerobic Treatment Unit.
- Mound Systems.
- Recirculating Sand Filter System.
- Evapotranspiration System.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
How do you know if your septic system is failing?
The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. The area of the strongest odor will point to the location of the failure in the septic system.
Why are some septic tanks above ground?
An above ground septic system, also known as a sand mound septic system, is used for the on-site treatment of sewage when site conditions are not suitable for installing a conventional septic system due to the increased risk of the system failing.
Learn how much it costs to Install a Septic Tank.
Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.
In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.
This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.
Septic System Cost Estimator
Prices for septic tanks range from $3,157 to $10,367, with an average price of $6,743. Installation of a 1,000-gallon tank for a three-bedroom home typically costs between $2,100 and $5,000. In the absence of manpower, materials might cost anywhere from $600 to $2,000. Complete septic systems, comprising a leach field (also known as a drain field), tank, and pipe range in price from $10,000 to $25,000 (including installation). According to the kind of leach field, installation expenses range from $5,000 to $20,000.
Final costs for septic tank installation are determined by the kind of system, materials used, and overall size of the tank.
Various sorts of setups will be discussed as well, including conventional, mound, evapotranspiration, recirculated sand, constructed wetland, and chambered systems.
| National Average | $6,743 |
| Typical Range | $3,157 – $10,367 |
| Low End – High End | $450 – $20,000 |
The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.
New Septic System Cost
It is based on 943 HomeAdvisor members’ actual project expenses that have been submitted.
- The cost information in this report is based on real project costs provided by 943 HomeAdvisor members.
Optional components include the following:
- Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers
Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and then recycles the water. Pump for aeration: If your tank is equipped with an aerobic system, you’ll want an aerator to drive oxygen into the tank.
Aerobic Septic System Cost
Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.
You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.
Get Quotes From Local Septic Tank Pros
Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
- The cost of septic tank material ranges between $500 and $2,000.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300 Approximately $1,500 to $4,000 in labor costs. It costs $500 to $2,500 to install a septic tank
- 500: $500–$900
- 750: $700–$1,200
- 1,000: $900–$1,500
- 1,200: $1,200–$1,600
- 1,500: $1,500–$2,500
- 2,000: $3,000–$4,000
- 3,000: $4,500–$6,000
- 5,000+: $7,500–$14,000
- 500: $500–$900
- 1,200: $1,200–$1,
Leach Field Cost
Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.
Alternative Septic Systems Cost
When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.
Mound Septic System Cost
Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.
Recirculating Sand Filter Septic System Cost
Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.
Drip Septic System Cost
Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.
Evapotranspiration System
Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.
Built Wetland System
An evapotranspiration system might cost anywhere between $10,000 and $15,000.
In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. In dry and arid areas with little rain or snow, they are solely helpful as a source of water.
Chambered System
Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.
Septic Tank Replacement Cost
The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.
Replacement of the filter costs between $230 and $280.
Drain Field Replacement Cost: $7,500.
Septic System Maintenance Costs
It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:
Inspect and Pump Your Septic Frequently
Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.
- Initial inspection costs between $250 and $500
- Annual inspection costs between $100 and $150
- And camera inspection costs between $250 and $900.
Use Household Water Efficiently
A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.
Properly Dispose of Your Waste
Your septic system is responsible for disposing of everything that goes down your drains and toilets.
One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:
- Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
Maintain Your Drainfield
The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:
- Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You
A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.
Concrete Septic Tank Cost
Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.
Plastic and Poly Septic Tank Prices
Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.
Fiberglass Septic Tank Prices
Septic tanks made of plastic range in price from $500 to $2,500 on average, not excluding installation costs. Material such as plastic is long-lasting, lightweight, and reasonably priced. In comparison to concrete, they are less prone to cracking and rusting. Plastics are particularly sensitive to damage during installation because of their small weight.
Steel
It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.
Labor Costs to Install a Septic System
New steel storage tanks are unlikely to be built in the near future. They will ultimately rust or corrode, no matter how well-built they are. As a result, they are not permitted by many municipal construction rules, and you will only find them in existing installations. In the ground, steel isn’t very durable, therefore it’s not the most common material to use.
Compare Quotes From Local Pros
Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000
DIY vs. Hire a Septic System Pro
A look at how much septic tanks cost in different parts of the country is provided below. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York Colorado:$7,800 Idaho:$10,000
FAQs
In this section, we’ll look at how much septic tanks cost in different parts of the country.
Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 New York City: $5,600 Colorado:$7,800 Idaho:$10,000
- What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
- Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.
What are the signs I need a new septic tank?
There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.
Construction on your home or the addition of more occupants will have an impact on your septic system.
pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.
Old age: If your septic system has reached the end of its useful life, it is time to replace it.
Does homeowners insurance cover septic systems?
Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.
How much do septic system repairs cost?
Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.
- Repairing a septic system might cost anywhere between $600 and $3,000. For each sort of repair or item described below, tank repairs typically cost less than $1,500. From $2,000 to $20,000, leach fields can be purchased.
Still Have Questions About Septic Tanks?
- A septic tank riser is normally priced between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time
- Therefore, they lower overall expenditures. The installation of a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic construction.
In most cases, a septic tank riser costs between $200 and $400, not counting installation costs. Due to the fact that they save septic contractors time, riders save labor expenses. Septic tank riser installation is not something that should be attempted on your own. There are concrete and plastic septic tank risers to choose from.
What Is a Septic Tank Riser?
A septic tank riser normally costs between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time. A septic tank riser installation is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic varieties.
The Benefits: How Septic Risers Save You Money
A septic tank riser costs between $200–$400, not including installation. Risers reduce labor expenses by saving septic contractors time; Installing a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic materials.
No Digging Fees
A septic tank riser is normally priced between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time; therefore, they lower overall expenditures. The installation of a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic construction.
Reduces Labor Costs
Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and start to work more quickly and efficiently. In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor.
You’ll Only Pay for Materials and Labor Once
When you have a septic tank riser installed, you will only be responsible for the labor and materials used in the installation. The money you save on yearly inspections and regular local maintenance will more than compensate for the cost of the septic tank riser over time.
Septic Tank Riser Styles
Image courtesy of Ekaterina / Adobe Stock Septic tank risers are available in a variety of concrete and plastic types ranging in size from eight to 24 inches. Each style has its own set of pros and disadvantages.
Concrete Septic Tank Risers
Adobe Stock image courtesy of Ekaterina In different concrete and plastic forms, septic tank risers range in size from eight to 24 inches. Both advantages and disadvantages are associated with each style.
- Depending on how well it is maintained and drained, it can endure for 40 years. Septic tank risers made of steel are more durable than those made of plastic. Maintenance is less involved than with plastic
- Installing it is difficult, and purchasing it is expensive. Over time, it becomes more susceptible to corrosion and cracking. Increased labor expenses due to the need to lift and maneuver during installation or inspection
Plastic Septic Tank Risers
Plastic septic tank risers are available in a variety of materials, including PVC and polyethylene, among others. Pros:
- Purchase and installation costs are less expensive than those of concrete. Transport does not necessitate the use of large equipment. When compared to concrete septic tank risers, they are lighter in weight
- They may be covered with sod to improve their looks
- It is not susceptible to cracking like cement. Plastic is resistant to erosion.
- It is possible to crush it beneath the earth
- However, it is not as durable as concrete. Maintenance is more difficult to keep up with than with plastic.
How Much a Septic Tank Riser Costs
Installing a septic tank riser will cost between $200 and $400. Double septic tank risers will cost you twice as much as a single riser. It is more expensive to build concrete risers than it is to install plastic risers because of the weight of the concrete risers and the equipment necessary for installation.
Installation Usually Requires a Plumber
In part due to the difficulty of septic tank installation, it is not recommended as a Do It Yourself job. While it is possible to purchase all of the supplies for a DIY installation on the internet, there are several safety dangers associated with doing so. Opening a septic tank access can result in the emission of poisonous fumes, which can cause someone to go unconscious. Additionally, without prior experience, waterproofing and ensuring that the risers are properly connected together might be difficult.
They’ll dig up the area surrounding the access hole, then fill up the dirt around the pipe and install a cap on the upper section of the riser to make it easier to get to the pipe in the future.
Cost of an Above Ground Mound vs Conventional Septic System (2022)
Because mound septic systems need more complicated construction than regular septic systems, they are significantly more expensive than conventional septic systems. The cost of the electric pump as well as the sand are also included in the overall pricing. The typical cost of a mound septic system is between $10,000 and $15,000 dollars. Conventional septic systems are less expensive, with prices ranging between $3,000 and $15,000 on average.
In This Article
- The costs of mound septic systems
- The costs of conventional septic systems
- The advantages and disadvantages of conventional septic systems
- The advantages and disadvantages of mound septic systems
- And other considerations Septic System Estimates are provided free of charge.
Costs of Mound Septic Systems
- In general, a big septic system costs between $10,000 and $20,000, but it can cost significantly more for very large systems. It is critical to maintain your septic system on a regular basis, with yearly maintenance and pumping costing an average of $500.
A septic system that is built on top of a sand mound is also known as an above-ground septic system.
Costs of Conventional Septic Systems
Conventional septic systems are less expensive than mound systems, but pricing are still dependent on the size of the system, the soil characteristics, and the placement of the system.
- You will normally require a permit before having a septic system constructed, which costs between $250 and $1,000 on average, with pricing varying depending on the location of the system. According to the Midwest, a standard septic system costs between $2,000 and $5,000 on average, but it may cost anywhere from $4,000 and $15,000 in locations where labor and materials are more expensive. The cost of a septic tank on its own ranges between $ 500 and $1,800, depending on its size. Typically, the price of piping and other materials is between $100 and $200. A thorough inspection is necessary every one to three years, and the cost ranges between $200 and $600 on average. In addition, the system must be pumped on a regular basis, which costs between $200 and $400.
Pros and Cons of Conventional Septic Systems
A standard septic system is made up of two parts: an inlet tank and a drain field. During the separation process, liquid waste separates from solid waste in the tank, which then flows down the drain field where it filters into the soil. Aspects of conventional systems are both advantageous and disadvantageous.
Conventional Septic System Pros
- In a normal septic system, there are two components: an inlet tank and a discharge field. During the separation process, liquid waste separates from solid waste in the tank, which then flows down the drain field where it filters into the soil. Aspects of traditional systems are both advantageous and detrimental.
Conventional Septic System Cons
- Watewater backlog causes serious problems in the house (not to mention the unpleasant smell), impacting everything from toilets to sinks to showers. Leaks and ruptures are two different things. As soon as you discover any problems, such as leaks or cracked pipes, you must take immediate action. It causes significant problems for your septic system and can result in expensive property damage. Roots and digging are two of the most typical causes of damaged pipes. The presence of rust in the pipework of traditional systems indicates that they have not been adequately maintained. Corrosion in your pipes can lead them to fail, which can result in the septic system leaking
Pros and Cons of Mound Septic Systems
Mound septic systems entail the construction of an above-ground pile of gravel or sand to conceal the sewage disposal system. The system’s absorption region is elevated above ground, necessitating the use of an electric pump to transport trash to the mound for treatment. Mound septic systems, like traditional systems, have their own set of pros and downsides to consider.
Mound Septic System Pros
- Environment:Mound systems perform well in damp climates, exhibiting less problems than traditional systems in this climate. Construction: When installed properly, mound septic systems create the least amount of harm to the yard since just a little amount of excavation is required
- Discharge:Mound systems do not immediately release liquid waste into a ditch, pit, or body of water
- Instead, they discharge it through a sluice gate.
Mound Septic System Cons
- The cost: Although environmentally friendly building is less expensive than traditional installation, it is still more expensive. It is also more expensive to purchase and maintain the systems themselves. Land usage:Mound septic systems frequently interfere with drainage patterns and restrict land use, necessitating the installation of pumps and siphons to ensure optimal operation. Rebuilding: Any degree of leakage or seepage might necessitate a partial or complete reconstruction of the mound.
Other Considerations when Choosing a Septic System
There are many other types of septic systems to choose from, in addition to mound versus conventional systems. Choosing between aerobic and anaerobic digestion, for example, is important since it pertains to the type of bacteria that is utilized to breakdown waste. Whichever kind you pick, you must have your septic system tested and pumped by a professional at least once every three years. The frequency with which you should empty the tank is determined by the size of the tank and the amount of trash you require it to manage.
References:
- Septic Tank Pumping Table
- Septic System Types
- Septic Tank Pumping Table Exactly how often should I pump out my septic tank is up to you.
Ashley Smith is the author of this piece.
Find Local Septic Pros Who Will Compete for Your Business
Be prepared to spend substantially more money to establish or replace a mound septic system than you would if you were constructing or upgrading a standard septic system in your house. While the cost of any septic system varies depending on the size of the home or structure it is intended to serve, expect to pay a minimum of $10,000 for a smaller habitation or building and as much as $20,000 or more for a bigger development project with a mound septic system. Depending on where you live in the country, the expenses may be significantly higher than the national average.
Because the land cannot sustain the installation of a normal septic system, it is common for mound septic systems to be erected.
TL;DR (Too Long; Didn’t Read)
As a result, in places with high water tables, clay soils, or bedrock, mound septic systems are the default choice because a conventional system will not operate on these types of properties. Mound septic systems need a more complex engineering design than normal systems, as well as the addition of extra electrical components and other components. A mound system is made up of a gravel layer on top of a few feet of sand, with a few more feet of gravel on top of that. Following installation, dirt is spread over the mound in order to facilitate grass planting.
This pump chamber is responsible for pumping wastewater into the drain field.
The life expectancy of a mound septic system is significantly less than that of a normal septic system.
While the latter may require maintenance every 20 to 30 years or so, the mound system may require replacement considerably more frequently. Much is dependent on how effectively the system is kept up to date.
Care and Maintenance
Inspections and pumping are required more frequently with a mound septic system than with a normal system, thus these are extra expenditures to consider. It is probable that you will need to have your mound system pumped out on a yearly basis, as opposed to a traditional system, which may only require the waste to be pumped out every two to three years. Of course, a lot relies on the number of people in your family. A single person or couple living in a house with a mound system will often not require the septic system to be pumped out as frequently as a family living in the same residence.
With the addition of pumping to the annual maintenance, you may anticipate to pay $500 or more per year for mound septic system upkeep.
Aesthetics of a Mound System
There is also additional disadvantage to using a mound septic system. A standard septic system is virtually undetectable, but a mound system will leave a large hump in your front or back yard, which will not make for a pleasing landscape. Due to the nature of the septic system, you are not permitted to plant trees on the mound, construct a patio on top of it, or install any heavy objects on it. It is extremely difficult, if not impossible, to conceal a mound septic system. References Biography of the Author Jane Meggitt is a graduate of New York University, and her writing has featured in a variety of publications, such as PocketSense, Zack’s Investment Advisor, nj.com, LegalZoom, and The Nest, among many others.
How much does it cost to install septic riser?
Additionally, the mound septic system has a disadvantage. A standard septic system is virtually invisible, but a mound system will leave a large hump in your front or back yard, which will not make for a nice landscape. The nature of the septic system prohibits you from planting trees on the mound, constructing a patio on top of it, or putting any heavy things on top. It’s difficult, if not impossible, to conceal a mound septic system. References Background Information Jane Meggitt is a graduate of New York University who has had her writing published in dozens of magazines, including PocketSense and Zack’s.
- Step 1 – Collect the components you’ll need
- Step 2 – Vacuum the top of your septic tank
- And Step 3 – Attach the Butyl Rope to the Tank Adapter Ring (optional). Step 4 – Place the Adapter Ring around the hole and screw it down
- Step 5 – Attach Butyl Rope to the bottom of each Riser
- Step 6 – Attach the Risers and Lids to the Adapter Ring
- Step 7 – Attach the Risers and Lids to the Adapter Ring
How much does it cost to maintain a septic system? A 1,500-gallon tank would most certainly be required for a house with five or more bedrooms, and this will cost between $15,000 and $25,000. According on the size and complexity of the work, the cost to replace an old septic system ranges from $3,000 to $7,000 (USD).
Septic Tank Installation and Replacement Cost
What is the cost of operating a septic system? When building a house with five or more bedrooms, you’ll most likely want a 1,500-gallon tank, which will cost between $15,000 and $25,000 in materials. According on the size and complexity of the work, the cost to replace an old septic system ranges from $3,000 to $7,000.
| Septic Tank Installation | Average Costs |
|---|---|
| National Minimum Cost | $500 |
| National Maximum Cost | $5000 |
| National Average Cost | $1500 |
According to the Environmental Protection Agency, one in every five residences in the United States relies on a septic system for wastewater management (EPA). In the case of septic systems, you may have a septic system for your home alone, or you may be connected to a communal system that services a small number of homes. Untreated wastewater created by a house or company is treated on site by a septic system, which is an on-site treatment system. Sewage lines convey wastewater from your shower, toilet, sinks, clothes washer, and trash disposal away from your home and into a septic tank buried in your yard.
Solids are separated from floatable debris in the septic tank, and the leftover liquid drains from the tank through a series of perforated tubes and onto a drain field or leach field after being separated in the tank.
The usage of septic systems is popular in rural regions that do not have access to a centralized municipal sewer system.
Tank capacity ranges from less than 1,000 gallons to more than 2,000 gallons, with the size of the tank determined by the quantity of water you consume on a daily basis.
Condos, apartments, residences, business spaces, and other types of structures might benefit from septic system installation or replacement services.
What’s in this cost guide?
- According to the Environmental Protection Agency, one in every five households in the United States relies on a septic system to handle wastewater disposal (EPA). In the case of septic systems, you may have a septic system for your home alone, or you may be connected to a larger system that serves a larger number of properties. A septic system is a wastewater treatment system that is installed on the property of a home or company. It treats the wastewater generated on the property. Septic tanks are buried in the yard and collect wastewater that is discharged from your shower, toilet, sinks, clothes washer, and trash disposal. Septic tanks collect wastewater from your shower, toilet, sinks, clothes washer, and garbage disposal. Solids are separated from floatable debris in the septic tank, and the residual liquid drains from the tank through a series of perforated tubes and onto a drain field or leach field after being separated from the solids. As the liquid filters down through the soil, harmful bacteria is eliminated, restoring the water to its safe state of purity. The usage of septic systems is typical in rural locations where there is no centralized city sewer system. The installation of septic systems can be done during the construction of a new home or business, or they can be replaced by removing the current tank and installing a new one. Tank capacity ranges from less than 1,000 gallons to 2,000 gallons or more, with the size of the tank determined by the quantity of water you consume on a daily basis. In order to install a new septic system, homeowners may either furnish the supplies for the system themselves or contract with an expert in septic systems. Condos, apartments, residences, business spaces, and other buildings might benefit from septic system installation or replacement.
Alternative septic systems
Alternative techniques are particularly effective on steep locations, highly rocky land, or poor soil. Among the options available are aerobic septic systems, mound septic systems, raised-bed septic systems, and others. The cost of a septic system installation or replacement may be greater or cheaper than the average depending on the area and kind of system. Locate the most qualified septic system consultant for your project needs. Zip code must be entered correctly.
Signs you need a new system
Anyone would not want sewage water rising up through their front yard on one of the hottest days of the summer season (or even on the coldest day of winter). Waterborne pathogens such as protozoa, bacteria (such as E. coli), and viruses may be spread through fecal matter, making wastewater not just stinking and disgusting, but also potentially deadly. It is possible for unclean wastewater to drain through the soil and pollute the water you and your friends and neighbors drink if your septic system is leaky, overwhelmed, or otherwise compromised.
Knowing what indicators to look for might help you catch an issue before it becomes a major problem.
This includes having your septic tank pumped out by a professional every three to five years.
Other indicators may indicate that it is necessary to contact a septic system specialist as soon as possible to either repair or replace the system.
How Much Does a Septic System Cost?
| Medium: Averages $2,000-$5,000; Runs $4,000-$12,000 in Higher Cost Areas | Enhanced System: $10,000-$20,000+ |
- The cost of installing or rebuilding a traditional septic system (including the tank) is from $2,000 to $5,000 in the Midwest, but can range from $4,000 to $12,000 or more in locations with higher material and labor costs. Septic systems that are designed, engineered-like or alternative septic systems, such as mounds, soil/peat filters, aerobic systems, and/or artificial wetlands, can cost $10,000 to $20,000 or more, according to the Rhode Island Regional Water Quality Program. These alternative septic systems perform better than the conventional technique in areas with high groundwater levels or soil that is slowly or fast percolating, as well as in areas near drinking water supplies, wetlands, coastal ponds, or other water resources. Simply installing a septic tank will cost between $500 and $1,800 based on its size (varying from 300 to 1,000 gallons) and kind. It costs an additional $100-$200 to purchase piping and other necessary supplies
- New Mexico State University gives an overview of the septic tank installation process. Many locations, however, require that a septic system be planned and constructed by experienced and licensed experts
- For more information, contact your local or state sanitation agency.
Related articles:Septic Tank Cleaning,Sewer Line Replacement,Replacing Copper Pipes What should be included:
- It is necessary to employ Septic systems when sewage treatment plants are not accessible, which is typically the case in rural or suburban areas with big lots. Essentially, a septic tank is a huge, underground, waterproof container that can be constructed of concrete, fiberglass, or plastic (polyethylene). An explanation of how septic systems function and where they might be utilized can be found at the North Carolina State University Ag Extension
- Installing or replacing a septic system might take anything from a few days to a week or more. The procedure entails substantial excavating, which is frequently accomplished using powerful earth-moving equipment.
- The majority of counties and states require a construction permit for the installation or replacement of a septic system, which may cost anywhere from $250 to $1,000 or more depending on the location and complexity of the job. For further information, contact your local building and planning department. A septic system installation typically entails substantial digging and damage to the landscaping
- New grass and other plantings can cost anywhere from $100 to $1,000 or more.
- Unlike individual septic tanks, each house has its own underground septic tank, but all of the septic tanks are connected to a single drainfield, leachfield, or soil absorption system. A cluster septic system, which is often implemented by developers, distributes the expense of drainfield installation and maintenance across a large number of dwellings.
- To find out if your local sanitation agency maintains a list of licensed septic installation firms, contact them and ask. Onsite wastewater recycling contractors can be found by contacting the National Onsite Wastewater Recycling Association for recommendations. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction.
| Posted by:Fredbill in Ashland, VA. | Posted:October 28th, 2020 10:10AM |
| Type:PVC pipe |
When flushing my toilet during wet weather, it was gurggling and not flowing out properly. Septic company wants to replace old black pipe with PVC pipe running 80 feet from septic tank to distribution box. They think the 65 year-old black pipe is collapsing. Is $37.50 per foot a reasonable price?
| Posted by:Fiorella in Miami, FL. | Posted:July 28th, 2020 05:07PM |
| Type:Conventional septic |
Septic tank needed repair. House did not have a drain fill. Had one collapsed leg that was installed years back. Repair was done to the tank and an entire drain fill with 5 legs was installed. My house is located in a high water table. I hired a reputable plumbing company that offers a three years warranty. Is this a reasonable price to pay for repairing a septic tank and installing a complete drain fill with 5 legs?
| Posted by:Dorie Dew in Nederland, CO. | Posted:May 22nd, 2020 02:05PM |
| Type:leach field install |
I am being told that because of county planning dept regs and not enuf “soil” (4 ft) before bedrock here in the Rockies, it will cost $40,000 to install a septic system for a 2 bedroom home (the smallest unit). Please tell me there is an alternative!
| Posted by:in Stone Mountain/atlanta, GA. | Posted:September 9th, 2019 04:09PM |
| Type:New system |
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit. By Easy Clean Septic 678-532-1276 Easycleanseptic.com
| Posted by:in Stone Mountain/atlanta, GA. | Posted:September 9th, 2019 04:09PM |
| Type:New system |
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit.
| Posted by:Gregory Chappel in Trinidad, CA. | Posted:August 15th, 2019 01:08PM |
| Type:New tank and drain field |
1500 gallon tank, 4″line, 90′ rock trenches took 3 days
| Posted by:Unclebob in McArthur, CA. | Posted:January 26th, 2019 09:01AM |
| Type:Trailer park |
I fought septic tank, leach field problems for years. this is a trailer park, with 35 trailers going into a 7500 gallon tank with 1000 feet in length of leach field. The killer was cooking oil and grease. Plugged up the leach field. Educating the tenants made a huge difference. Then I found the magical cheap combination that worked much better than those expensive enzymes.Equal parts, Yeast, Brown Sugar, and Baking soda. I mix a pound of each and flush it down a toilet every couple of months.
Sams club and Costco sell it in bulk cheap.
| Posted by:a user in moreland, GA. | Posted:July 20th, 2018 12:07AM |
That seems like a lot of money for s single drain line
| Posted by:Sfr Development LLC in Boone, NC. | Posted:August 11th, 2017 12:08PM |
| Type:Conventional 2 Foot Chambers |
1000 gallon tank. In Mountains Boone NC. Have 30 inches to 48 inches of soil. 3 – 60 Feet 2 foot chamber lines
| Posted by:rrrr in berlin, NJ. | Posted:July 12th, 2017 02:07PM |
| Type:septic |
location-south jersey-sandy soil approx cost please? looking for economy and conformity.
| Posted by:Any Help Appreciated in Charleston, SC. | Posted:May 12th, 2017 08:05AM |
Getting ready to purchase a piece of land that requires a septic system in order to build.
From soup to nuts, (permits, materials, installation) what should I be looking at for total cost? This house will be built very close to water(Charleston, SC less than.5 miles) How long does the process typically take? Any and all help truly appreciated
| Posted by:Ken Carbaugh in Leesburg, VA. | Posted:June 20th, 2016 06:06PM |
| Type:conventional to alternative systems |
A perc or perk test in Northern Va from a licensed consultant will cost between 1200-2500 dollars depending the district and county fees. Fairfax County costs are 2-4x as much due to local health dept bureaucracy and redtape requiring a surveyor and engineer to be used for any certification or permitting. Real costs of conventional systems (3-4 bedrooms) are from 14-25k depending on the soil percolation results and whether or not a pump is required. If the system is an alternative (BAT in MD) the design costs add 1000-2500 in costs and the installation of the specialized equipment adds costs that can total 20-35,000 easily.
Your property is the most valuable asset you will own so be careful with the land you contract to purchase and beware not all property is equal in value for development.
| Posted by:Bob42 in High rolls, NM. | Posted:March 25th, 2016 12:03PM |
| Type:Concrete tank, leachfield |
$5500 was the total cost for everything including permits and inspection certificate, tank, pipes, new leachfield etc. I live rurally in a mountainous region with sloping land so more work was required to remediate the land for the leach field to be level. Took about a week from contract signing to completion.
| Posted by:Susana in cumming, GA. | Posted:August 24th, 2015 04:08PM |
| Type:treating the leach field |
I had a septic company come to do a septic tank pump for $150 but they said I needed a more expensive leach field treatment at a cost of over $2500 even thought there is no back up or smell anywhere. They wind up doing an enxyme one leaving me with 6 gallons of liquid enzyme I am suppose to pour down the toiled once a month. My son says I was ripped off. Is he right?
| Posted by:payed too much? in Effort, PA. | Posted:August 2nd, 2015 11:08PM |
| Type:dual tank w mound |
Had Pump replaced as well as wire to house, dug up yard, to replace line, replaced pump, didn’t take garbage, didn’t clean up landscape, pump both tanks included in price, found truck parts in driveway and tanks not pumped, claim truck broke be back to pump.was this a lot, I had to rake out landscape and driveway, clean wires, boxes and garbage left behind,.I hope they pump the tanks soon.
| Posted by:Daytrp in Eldersburg, MD. | Posted:July 17th, 2015 08:07PM |
| Type:Repair – new construction |
Repair permit: $130-450 depending on county.New construction permits: $250-550.New septic $16-22k for advanced treatment, $8-10k conventional Perc test for repair: $850-$1,400 takes 2-6 hours. Done with county sanatarian onsite. A common septic repair: (installation of 2 – 60′ long x 3′ wide x 8′ deep with 4′ of stone below pipe invert) runs about $6,500.Trench dimensions are determined by number of bedrooms (occupancy) and percolation rates from perc test. price varies depending on Trench size.
Septic tank add $2,500-3,500 Pump chamber, pump and controls add $4,000-5,000.
Some states Have programs to help upgrade your septic tank. Check with your county health department.I bid these jobs and this is my basic start point. Specailty jobs, difficulty of access, heavy rock, all add to the bid price
| Posted by:ABMCCAA in Bakersfield, CA. | Posted:June 26th, 2015 05:06PM |
New 1500 Gallon Tank, Engineering, 60′ of Leach Field with Rock base drainage system. 50 ton of 3/4″ rock, new 4″ main line to house, soils testing and permits. Took 3 days total.
| Posted by:andrewbasil in hemet, CA. | Posted:March 23rd, 2015 06:03AM |
| Type:simple leach line replacement |
75 feet of leach line were dug up and replaced the. attached up to original fifteen hundred gallon 1973 concrete septic tank and re buried. they had to knock down two fruit trees and by accident sheared off a water tap. (Having not repaired the water line it has now become a 5 foot stream shooting straight up in air.) I do feel grandmother was taken advantage and charged double of not more for services that. and this is the worst part. a permit nor independent inspection was never done for this job.
Help me out here what do I do?
| Posted by:ltodd kinsey in cda, ID. | Posted:February 26th, 2015 11:02PM |
| Type:all |
If properly maintained a working system should never need pumped
| Posted by:M. IRIARTE in STROUDSBUR, PA. | Posted:February 4th, 2015 05:02AM |
| Type:SEPTIC |
ANYONE IN THE POCONOS HAS HAD THEIR SEPTIC SYSTEM REPLACE. WHAT WAS THE COST OF REPLACEMENT.WOULD LIKE TO GET FEEDBACK Page 2 of 2-Previous12 External Resources:
- Twri.tamu.edu/reports/1999/l5234.pdf
- sohioline.osu.edu/aex-fact/0744.html
- s
More Articles on the Subject of the Home and Garden
| Check Out All Costs for Home and Garden | How Much Does a Kitchen Remodeling Cost? | How Much Does a Propane Tank Cost? | How Much Does a Plumber Cost? |
| CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy. |