There are two primary types of septic system failure: hydraulic failure and phosphorus treatment failure. Hydraulic failure occurs when the soil cannot handle the volume of wastewater, and as a result sewage overflows into the house.
Is your septic system up to code?
- The best way to check if the septic system is up to code is to call the local authority having jurisdiction. This person or body will inspect what you have and let you know. Having said that, this person is likely to force you to upgrade the system if it is deficient and not close to todays’ minimum standards.
What are the new regulations regarding septic tanks?
Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
Can you sell a house with an old septic tank?
If you’re selling a property with a septic tank, then you must be transparent with buyers about the fact the property uses a one and provide a detailed specification of the system. In fact, You are required by law to inform a buyer in writing about the presence of a septic tank.
What is the most common cause of septic system failure?
Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.
Do I have to replace my septic tank?
Under the new Environment Agency General Binding Rules, If you have a septic tank that discharges directly to a surface water (ditch, stream, river, etc.) you must replace or upgrade your septic tank treatment system to a full sewage treatment plant as soon as possible, or when you sell your property.
Does heavy rain affect septic tank?
It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.
How much does a new leach field cost?
Although costs vary according to the size of the leach field, soils and costs of local permits, expect to pay between $5,000 and $20,000 for leach field replacement. It is the most expensive component of the septic system.
How long do brick septic tanks last?
Typically, a soakaway will last 10 to 20 years, but 60 years is possible too! While I have described the effect of not de-sludging on the bottom solids, the top crust, or floating solids can be an even bigger menace.
What is the difference between a septic tank and a leach field?
The septic tank stores solid waste products that are not reduced to liquid effluent until you have them pumped out and disposed of properly. The leech field is a series of perforated pipes that provide an effective means for disposing of contaminates without endangering animals or contaminating the ground water.
What is the life expectancy of a concrete septic tank?
Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.
Do new build houses have septic tanks?
Do New Houses Have Septic Tanks? Most new houses that are built in groups, or which are in close proximity to other buildings, will not use septic tanks. If a connection to the local sewerage system is possible, most property developers will do the work that’s required to avoid needing septic tanks.
Does a septic tank affect mortgage?
How a septic tank could affect your negotiations. In most cases, a correctly installed well-maintained system, is unlikely to cause any issues. Even where a property has an older septic tank, provided it does not discharge directly into surface water, then it may still meet the relevant standards.
How do I know if my drain field is failing?
The following are a few common signs of leach field failure:
- Grass over leach field is greener than the rest of the yard.
- The surrounding area is wet, mushy, or even has standing water.
- Sewage odors around drains, tank, or leach field.
- Slow running drains or backed up plumbing.
Is Ridex good for your septic system?
How additives, like Rid-x, interfere with your septic system’s eco-system. According to the EPA and the Ohio Department of Health, not only are additives like Rid-X not recommended, but they actually have a detrimental and potentially hazardous effect on your septic system’s waste treatment process.
What Makes a Septic System Fail?
Failures of septic systems may be classified into two categories: hydraulic failure and failure of phosphorus treatment systems. Whenever the soil is unable to handle the level of wastewater, it causes sewage to overflow into the home, which is known as a hydraulic failure. This is caused by the following factors:
- The tank was not pumped out in time. When sludge and scum from an overfilled tank spills into the leach field and clogs the soil, wastewater will back up into the home or spill out onto the ground. Systems that have been improperly sited or constructed It is possible for wastewater to back up or burst through the drain field when the septic system is sited near or too close to a high water table or when the system is designed with incorrect fill. During the spring, when the water table is at its highest, this is especially likely to occur. Roots of trees and shrubs Tree and bush roots growing over a leach field can cause pipes to burst or get clogged, causing problems with the distribution system.
Phosphorus treatment failure occurs when phosphorus is allowed to migrate through coarse, sandy soils and into groundwater without being treated. In this particular instance, all of the pipes and pumps are functioning properly, and there is no obvious sign of a problem. The source of the problem is the incapacity of the surrounding soils to absorb and handle the phosphorus they receive.
HOW TO SAFELY ABANDON AN OLD SEPTIC TANK ON YOUR PROPERTY
If you’ve recently purchased an older house, it’s possible that a septic tank is located on the property. This is true even if your home is currently linked to the municipal water and sewer systems. A prior owner may have abandoned the ancient septic system and connected to the city sewage system when it became accessible at some time in the past. Despite the fact that there are standards in place today for properly leaving a septic tank, it was typical practice years ago to just leave the tanks in place and forget about them.
- The old tank may either be demolished or filled with water to solve the problem.
- It is possible that permits and inspections will be required.
- They are dangerous because curious children may pry open the lid and fall into the container.
- Falls into a septic tank can be lethal owing to the toxicity of the contents and the fact that concrete can collapse on top of you while falling into a tank.
- Eventually, this approach was phased out due to the fact that the steel would corrode and leave the tank susceptible to collapse.
- When it comes to ancient septic tanks, they are similar to little caves with a lid that might collapse at any time.
- The old tank is crushed and buried, or it is removed from the site.
If it is built of steel, it will very certainly be crushed and buried in its current location.
After that, the tank can be completely filled with sand, gravel, or any other form of rubble and buried.
Tanks can either be entirely dismantled or destroyed and buried in their original location.
The abandonment has been documented and plotted on a map.
It’s possible that you’ll forget about the tank once it’s been abandoned.
As a result, you might wish to sketch a map of the area where the old tank used to stand.
If you can demonstrate that an old septic tank was properly decommissioned, you may be able to increase the value of your property, and the new owners will enjoy knowing that large chunks of concrete are buried underground before they start digging in the yard to put something in it.
It may take some detective work to discover about the history of your land and what may be lying beneath the surface of the earth.
Upon discovering an old septic tank on your property that is no longer in service, contact Total Enviro Services for propertank abandonment procedures that meet with local standards and protect your family, pets, and farm animals from harm or death.
Basic Septic System Rules for Oklahoma – Oklahoma State University
Submitted by Sergio M. Abit Jr. and Emily Hollarn Several of us are interested in building or purchasing homes in the country for a number of reasons. It is possible to be closer to nature by living outside of city limits. It is also possible to cultivate vegetables and raise farm animals, and it is possible to live a simple and calm life in a rural environment by living outside of city limits. One thing to keep in mind is that, while living in the country has many advantages, access to the comforts that towns offer is not always available, especially in rural areas.
- The latter requires the installation of an on-site wastewater treatment system, which is more frequently known as a septic system.
- This information sheet outlines the requirements that must be followed while obtaining an installation permit, complying with site and soil limits, and installing and maintaining septic systems.
- PSS-2914, Keep Your Septic System in Good Working Order, and PSS-2913, On-site Wastewater Treatment Systems Permitted in Oklahoma are two of the state’s most important standards.
- Much of this information sheet is prepared in a simplified question and answer style, however there are certain sections that have been taken practically literally from the Code of Federal Regulations.
Site Requirements and Restrictions
Sergio M. Abit Jr. and Emily Hollarn wrote this article. For a number of reasons, many of us desire to build or own homes in the country. It is possible to be closer to nature by living outside of city borders. It is also possible to cultivate vegetables and raise farm animals in a rural environment, as well as to live a simple and calm life in a rural setting. However, it’s important to remember that, while living in the country offers a lot of advantages, access to the comforts that cities offer is not always available.
- On-site wastewater treatment systems, often known as septic systems, are required for the latter scenario to function well.
- 1) They are expensive to install, 2) they require regular care and maintenance, and 3) there are standards that control their installation and maintenance procedures.
- Extension fact sheets on septic system upkeep and the many types of systems that are authorized in Oklahoma might provide more information.
- Individual and small public on-site treatment systems are governed under Chapter 641, “Individual and Small Public On-Site Treatment Systems,” of Title 252 of the Oklahoma Administrative Code.
When putting together this fact sheet, this Code served as a guide. Much of this information sheet is prepared in a simplified question and answer style, although there are certain sections that have been taken practically literally from the Code of Federal Regulations (Code).
Permits
What is it that requires a permit? Septic system installations, including the addition of an extra system, on a property must be approved by the local building department prior to proceeding. Permits are also required for modifications to an existing system. It is possible that septic system improvements will be required as a result of the following: a) Septic systems that are not working properly, b) home renovations that result in an increase in the number of beds, c) an increase in water consumption as a result of a change in the usage of a house or building, and d) the movement of any component of a septic system.
Where can I acquire an installation or modification permit, and how do I get one?
To submit an application for a permit, go to DEQ Applications or contact your local DEQ office for help.
Often, the installer will take care of the paperwork for you, including the installation or modification permission application.
Inspections
When do you need a permit to do something? Septic system installations, including the addition of an extra system, on a property must be approved by the local building department prior to beginning. Permits are also required for any modifications to an existing system. The following factors may necessitate the alteration of a septic system: There are several reasons for this, including a) faulty septic systems, b) home renovations that result in the addition of bedrooms, c) increased water use as a result of a change in the intended use of a house or structure, and d) relocation or relocation-related changes to a septic system.
An installation or modification permit can be obtained in a number of ways.
To apply for a permit, you can do so online at DEQ Applications or by calling your local DEQ office for help.
Often, the installer will take care of the paperwork for you, including the installation or modification permission.
Installation
Who is qualified to build a septic system? It is essential that you use the services of a septic system installer that is licensed and certified by the state. A list of state-certified installers can be obtained from the local Department of Environmental Quality office. Non-certified installers are only permitted to install a restricted number of systems in the state of Oklahoma. These installations, on the other hand, must be examined and authorized by DEQ staff before they may be backfilled and/or turned on.
Installers are able to charge a fee for their own version of a warranty and maintenance plan that they provide to their clients.
This law requires the installer of an ATU to provide free maintenance for the system for two years from the date of installation, at no additional cost to the homeowner.
Purchasing a home when the ATU in the home is still within the warranty term enables you to continue to get warranty coverage until the two-year period has expired.
Responsibilities of the Owner
Septic systems that are properly maintained will remove dangerous contaminants from home water. Owners, their neighbors, and the environment are all at risk if their systems are not properly maintained and operated. In plain language, the rule mandates that the owner of a system be responsible for ensuring that the system is properly maintained and operated so that: 1) sewage or effluent from the system is properly treated and does not surface, pool, flow across the ground, or worse, discharge to surface waters, 2) all components of the system (including lagoons) are maintained and do not leak or overflow, and 3) the necessary security measures are in place (e.g.
- required fences are intact, septic tank lids are intact and properly secured).
- Civil and criminal fines may be imposed for violations and carelessness.
- Abit Jr., Ph.D., is a researcher at the University of California, Berkeley.
- Ms.
Was this information helpful?
TITLE 77:PUBLIC HEALTHCHAPTER I:DEPARTMENT OF PUBLIC HEALTH SUBCHAPTER r:WATER AND SEWAGE TITLE 77:PUBLIC HEALTH Part 905: Private Sewage Disposal Codes Section 905.40: Septic Tanks PART 905: Private Sewage Disposal Codes The approval of a septic tank is covered under Section 905.40 Septic Tanksa). Manufacturers of prefabricated septic tanks are required to submit to the Department for approval a set of blueprints for each size and configuration of septic tank that they produce. Plans must be drawn to scale and must include all measurements, baffles, tees, cleanouts, and material requirements, among other information.
In order to identify each manufacturer and series of certified septic tanks, the Department will assign an approval number to each manufacturer and will keep a list of the authorized manufacturers and approved septic tank series.
The tank shall be marked with the manufacturer’s approval number and the liquid capacity of the tank, in gallons, which shall be prominently displayed on the outside end wall of the tank above, or next to, the outlet pipe so that this information is readily visible after installation and before covering the tank with a cover.
3) All persons who manufacture, sell, offer for sale, or deliver septic tanks or aerobic treatment plants in or into the State of Illinois are required to keep a record of the following information about each septic tank or aerobic treatment plant sold or delivered: manufacturer, date of manufacture, date of sale, date of offer for sale, date of delivery.
- A) The name of the purchaser or the property owner (if different); B) The location of delivery (county and address, legal description, or driving instructions); C) The date of the sale and delivery; and D) The size of the septic tank or the model of the aerobic unit.
- It is necessary to design and install septic tanks in line with the following standards: 1) A septic tank must be watertight and constructed of sound and durable materials that are not subject to excessive corrosion, decay, frost damage, or cracking as a result of settling or backfilling.
- 2) Engineering Specifications (also known as technical specifications).
- B) The tank must be able to support a top-dead load of not less than 500 pounds per square foot (psi).
- To certify to the Department that the tank is planned and constructed in accordance with the requirements of this Part, the manufacturer, design engineer, or structural engineer must provide a written certification to the Department.
- 3) Substances (materials).
- B) Precast reinforced concrete (also known as precast concrete).
D) Reinforced plastic is another option.
F) Thermoplastics are a kind of plastic.
It is required that the tank’s liquid depth be 42 inches at its lowest point and 72 inches at its highest point (see illustration).
The invert height of the entrance should be at least 2 inches above the liquid level in the tank (see Figure 1).
6) Baffles are a type of trapdoor.
B) Inlet baffles must be situated no more than 12 inches from the inlet orifice to ensure proper operation.
D) Outlet baffles must be supplied, and they must extend to a depth of 40 percent of the liquid’s total depth.
This is the minimum distance required.
In the case of “V” or semicircular baffles, the sides of the baffles must be fitted securely against the end wall of the tank.
I) In lieu of baffles, submerged pipe T-branches or sanitary tees may be utilized at the inlets and outlets, provided that all of the above-mentioned distances and depths are preserved.
The diameter of the outlet baffles must be 4 inches.
L) When submerged pipe T-branches or sanitary tees are used as baffles, it is the septic tank manufacturer’s obligation to ensure that the components are installed in the right place during the first installation.
This baffle must be manufactured of a long-lasting material that is not susceptible to corrosion or degradation.
The septic tank filter baffle must be fitted in such a way that it extends or suspends to a depth equivalent to 40 percent of the liquid level in the tank while in use.
7) The ability to get access.
a fitting lid with a minimum dimension of 12 inches (width or diameter).
Risers manufactured of a waterproof and durable material.
There must be no water seeping through the junction between the septic tank and the risers.
c) Capacity is the number of people that can fit into a space.
For any facility other than a residence, septic tanks must be sized in accordance with the estimated flow indicated in Appendix A, Illustration A, and as specified in paragraph (c) below (2).
For flows larger than 500 gallons per day, the volume must be at least one-hundredth the expected daily sewage flow, whichever is greater.
A number of tanks or compartments are available.
Tanks with two compartments must additionally meet the requirements of the following: 1) The wall dividing the first and second compartments must be tightly fitting and constructed to withstand the disparity in pressure that may occur if one compartment is pumped while the other is not.
3) The center of the aperture between compartments must be aligned with the center of the inlet and outlet ports on both sides of the compartment.
It is necessary to install a gas deflection baffle beneath the tank’s outlet baffle, which will divert rising gas bubbles away from the outlet structure and into the tank’s interior.
The gas deflector baffle may be replaced with another type of septic tank filter that complies with NSF International/ANSI Standard 46, Section 10.
The tank access over the filter should be provided with an access riser that extends to a height of at least 3 inches above the level of the ground.
The installation of septic tanks is another option.
In every direction, level should be defined as plus or minus one inch (length or width or diameter of the tank).
It is prohibited to connect any pipes or fittings in the region of overdig surrounding the septic tank, including but not limited to, junctions, splices, and fittings.
No longer in use sewage treatment systems (such as septic tanks and cesspools), pit privies, aerobic treatment plants, and seepage pits must be thoroughly emptied out.
Upon removal of the tank from the earth, the excavation area must be completely filled with dirt. (Source: Amended at 37 Illinois Regulation 14994, which became effective on August 28, 2013)
Basics for Septic Systems
CHAPTER I:DEPARTMENT OF PUBLIC HEALTH SUBCHAPTER r:WATER AND SEWAGE TITLE 77:PUBLIC HEALTH Part 905: Private Sewage Disposal Codes Section 905.40: Septic Tanks Part 905: Private Sewage Disposal Codes The approval of a septic tank is covered under Section 905.40 Septic Tanksa). Septic tank manufacturers must submit to the Department for approval a set of plans that depicts each size and configuration of septic tank they manufacture. Detailed plans must be drawn to scale and include all necessary dimensions, baffles, tees, cleanouts, and material specs.
In order to identify each manufacturer and series of approved septic tanks, the Department will assign an approval number to each manufacturer and will keep a list of the authorized manufacturers and authorized septic tank series.
The tank shall be marked with the manufacturer’s approval number and the liquid capacity of the tank, in gallons, which shall be prominently displayed on the outside end wall of the tank above, or next to, the outlet pipe so that this information is readily visible after installation and before covering the tank with a lid.
If you manufacture, sell, offer for sale, or deliver septic tanks or aerobic treatment plants in Illinois or into Illinois, you must keep a record of the following information about each septic tank or aerobic treatment plant you sell or deliver: septic tank or aerobic treatment plant model and serial number.
A) The name of the purchaser or the owner of the property (if different); B) The location of delivery (county and address, legal description, or driving directions); C) The date of the sale and delivery; and D) The size of the septic tank or the model of the aerobic unit Design and Construction of Septic Tanks (B) In accordance with the following requirements, septic tanks must be designed and built: 1) A septic tank shall be watertight and constructed of sound and durable materials that are not subject to excessive corrosion, decay, frost damage, or cracking as a result of settling or backfilling.
- 2) A septic tank shall be constructed of sound and durable materials that are not subject to excessive corrosion, decay, frost damage, or cracking as a result of settling or backfilling 2) Engineering Specifications (also referred to as engineering requirements).
- A) The tank must support a top-dead load of not less than 500 pounds per square foot (psi).
- To certify to the Department that the tank is designed and constructed in accordance with the requirements of this Part, the manufacturer, design engineer, or structural engineer must submit a written certification to the department.
- The third point is the material.
- A) Reinforced concrete that is poured in place.
- C) Concrete block, provided that the core has been filled with concrete and reinforcing rods have been inserted into the core prior to pouring the concrete block.
- (E) Fiberglass that has been reinforced F) Thermoplastics are materials that are heat resistant.
It is required that the tank’s liquid depth be 42 inches at its lowest point and 72 inches at its highest point 5) Connections for the Inlet and Outlet 5) 1.
B) The septic tank’s inlet and outflow apertures must be fitted with waterproof openings that are cast into the concrete.
The following standards must be met by septic tank baffles.
B) Inlet baffles must be set no more than 12 inches from the inlet orifice to ensure proper flow.
D) Outlet baffles must be supplied, and they must extend to a depth of 40 percent of the liquid depth in the tank.
In order to cover the whole width of the tank, slip-in baffles are required.
H) Ventilation must be provided through all baffles, and a free vent space equivalent to the cross-sectional area of the building must also be provided.
When utilized as inlet baffles, submerged pipe T-branches or sanitary tees with a diameter of at least six inches are required.
ASTM 2661, ASTM 2665, ASTM 3034, or ASTM 2751 are the minimum criteria for submerged pipe T-branches or sanitary tees, provided that the pipe does not have an SDR (Standard Dimension Ratio) larger than 35.
M) When a single compartment septic tank is produced or utilized, a gas deflection baffle should be installed below the outlet baffle of the tank, with the purpose of deflecting rising gas bubbles away from the outlet structure and into the interior of the tank.
The gas deflector baffle may be replaced with another type of septic tank filter, such as an NSF International/ANSI Standard 46, Section 10.
The tank access over the filter should be provided with an access riser that extends to at least 3 inches above the ground surface of the tank.
In order to allow examination and cleaning of the tank, access must be granted over the tank’s intake and exit.
It is required that a riser with a minimum size of 12 inches (width or diameter) be installed to bring access over the inlet and outflow to within 12 inches of the ground surface if the top of the tank is more than 12 inches below the ground surface.
It is required that the central aperture of a two-compartment tank have access given within 12 inches of the ground level if the tank has an entrance above the wall that separates the compartments.
Secondly, for flows up to 500 gallons per day, the capacity below the liquid level must be at least 750 gallons in volume.
The installation of two or more tanks in series or a multi-compartment tank is required when the total daily flow reaches 1,350 gallons.
When multiple compartment septic tanks or several septic tanks in series are utilized, the capacity of the first compartment or tank must be equal to or more than two-thirds of the total capacity required.
It is necessary for the first and second compartment walls to be tightly fitting and constructed to bear the disparity in pressure that occurs when one compartment is pumped while the other is left unattended.
It is necessary that the center of the aperture between compartments be aligned with the center of the holes for inlet and exit.
5) A gas deflection baffle should be placed below the tank’s outlet baffle, and it shall be designed to divert rising gas bubbles away from the outlet structure and toward the inside of the tank.
The gas deflector baffle may be replaced with another type of septic tank filter, such as an NSF International/ANSI Standard 46, Section 10.
Access to the tank from above the filter must be given with a riser that extends to at least 3 inches above the ground level.
• Septic Tank Installation (optional) 1) To avoid floating or drifting of the septic tank, it must be leveled and backfilled with water before use.
It is necessary to seal all tank openings with mastic, tar, silicone caulk, or other waterproof material if the inlet, outlet, or access ports are to be located at or below the seasonal high water table, for example.
The f) Treatment Units that have been abandoned.
In order for the tank to contain water, the floor and walls must be fractured or crumbled, and the tank must be filled with sand or dirt to prevent water from entering.
It is necessary to fill the excavation with earth if the tank is being removed from the ground. According to Illinois Regulation 14994, which became effective on August 28, 2013, the following changes were made:
Who checks to make sure the requirements are followed?
Local governments in most parts of the state have taken on the obligation of ensuring that OSSFs in their jurisdictions comply with all applicable state regulations and procedures. There are several local governments that serve as “authorized agents” (AA) of the Texas Commission on Environmental Quality, which is in charge of managing the OSSF Program. A “designated representative” (DR) assists the AA in carrying out their tasks, which include examining plans for constructing, changing, extending, or repairing each OSSF; granting permits; and checking the system’s installation, among others.
The OSSF’s authorized agents and representatives also investigate and respond to complaints to verify that the OSSF is in compliance with minimal requirements.
After that, the agent can file a criminal complaint with the local judge of the peace, who will then investigate the matter.
Industrial or hazardous waste cannot be introduced into an OSSF; instead, this waste will be handled in the soil, destroying the OSSF by actually killing the microorganisms that break down the biosolids and causing it to fail.
Maintenance
All OSSFs will require maintenance at some point in their lives. Conventional anaerobic systems require the septic tank to be pumped out on a regular basis in order to remove sediments and prevent the system from backing up. It is advised that you pump your septic tank once every three to five years in order to avoid short circuiting the treatment process and causing damage. To acquire a list of registered sludge transporters in your region, go to theSludge Transporter Queryonline. Aerobic systems are more complicated and require more upkeep than anaerobic ones do.
A number of regulatory authorities have enacted more strict rules, which may include homeowner training or even prohibiting homeowners from performing upkeep on their properties.
In order to guarantee that the system runs appropriately, it is recommended that you contract with a licensed maintenance provider to verify, debug, and test the system as required by 30 TAC 285.91(4).
Once every six months if the system employs an electronic monitor, automated radio, or telephone to alert the maintenance provider of system or component failure as well as to monitor the quantity of disinfection remaining in the system, reporting might be lowered to once every six months.
If any needed repairs are not completed, the permitting authority will be notified of the failure.
The pills are extremely reactive, and within 10 minutes, they will have killed 99 percent of the germs present in the effluent.
AVOID USING TABLETS DESIGNED FOR SWIMMING POOL USE DUE TO THE POSSIBILITY THAT THEY MAY RELEASE A HIGHLY EXPLOSIVE GAS KNOWN AS NITROGEN CHLORIDE.
Please contact us at (800) 447-2827. For further information, please see the following website:
Where can I find more information and assistance?
The Small Business and Local Government Assistance Section of the Texas Commission on Environmental Quality (TCEQ) provides free, confidential assistance to small enterprises and local governments seeking to comply with state environmental requirements. Call us at (800) 447-2827 or visit our website at TexasEnviroHelp.org for more information.