Where To Locate Septic Tank Information? (Solved)

Follow the Main Sewer Line Look for a pipe that’s roughly four inches in diameter that leads away from your house. Remember the location of the sewer pipe and where the pipe leaves your home so you can find it outside. The sewer pipes will lead to where your septic tank is located.

How do you locate your septic tank?

  • Follow the pipe by sticking a thin metal probe into the ground near the sewer line. Probe about every two feet. Most septic tanks are around 10-25 feet away from your home, and cannot be closer than 5ft. Once you feel the probe striking flat concrete, fiberglass, or polyethylene you will have located your tank.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

How do you find a buried septic tank?

Tips for locating your septic tank

  1. If the septic tank lid is underground, you can use a metal detector to locate it.
  2. You can use a flushable transmitter that is flushed in the toilet and then the transmitter is tracked with a receiver.

Are septic tanks still legal?

Septic Tanks Explained… Septic tanks cannot discharge to surface water drains, rivers, canals, ditches, streams or any other type of waterway. you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

Does a septic tank have to be registered?

A septic tank discharges water into the ground, and the quantity of such is important so as to avoid damage to the environment. If your septic tank discharges two cubic metres or less above ground, then you don’t need to register it. If it releases five cubic metres, or less, below ground level then it is also exempt.

Do I need a certificate for my septic tank?

The General Binding Rules were designed to simplify the regulation of small sewage discharges. Septic tanks and small sewage treatment plants no longer need to be registered and there is no legal requirement to keep records of maintenance (although this is advisable).

Can a metal detector find a septic tank?

If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.

What happens if septic tank not pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

Does every house have a septic tank?

A septic tank is a crucial part of a home’s septic system. In the U.S., about 20% of homes use a septic system to manage their wastewater. Septic systems are most commonly found in the Eastern U.S., with homes in rural areas of New England being the most likely to have a septic system present.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

  • Paved surfaces
  • Unique landscaping
  • Your water well, if you have one
  • And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address. For further information on the placement of your septic tank, you can consult your home inspection documents or the deed to the property.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

We are open seven days a week, twenty-four hours a day.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.

How To Find My Septic Tank

  1. What is a septic tank
  2. How do I know if I have a septic tank
  3. And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
  4. What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

  1. “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
  2. When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
  3. The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
  4. In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

See also:  How To Get Certified To Install Septic Tank Georgias? (Best solution)

Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.

An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.

Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.

Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

  • A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
  • A septic system is likely to be installed in your home if you reside in a rather rural location.
  • Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
  • When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
  • Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.

  1. If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
  2. The county health department is responsible for keeping track of septic systems.
  3. A septic tank’s position could be depicted on a survey map, for example.
  4. The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

  1. In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
  2. By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
  3. The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
  4. Going via the sewage line itself is another method of locating the septic tank utilizing it.
  5. Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
  6. When the snake comes to a complete halt, it has almost certainly reached the tank.
  7. While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
  8. When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

  • Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
  • Directly in front of the home Immediately adjacent to your well (if you have one)
  • In close proximity to trees or densely planted regions
  • In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

See also:  Which Tee Is Best For Making An Inlet For A Septic Tank? (TOP 5 Tips)

Request an Estimate for the Job

How To Locate a Septic Tank

Customers frequently inquire about the location of a septic tank. Unless your septic tank is equipped with special risers that elevate the lids above ground level, you may need to enlist the assistance of a qualified professional. However, there are a number of things you may do to prepare yourself before calling for assistance. When it comes time to have your septic system repaired, being how to find your own septic system will save you money. Public health records can be obtained by contacting your local health department.

  • These permits should be accompanied by a graphic depicting the location of the septic system’s burying spot.
  • Public Records Request for the County of Nevada Request for Public Records from the County of Placer Examine the findings of your inspection report.
  • Make contact with the construction company that built your home.
  • Find the location of the main sewer line.
  • Locate the 4 inch sewer pipe that runs through your basement or crawlspace and take a measurement of the point at which it leaves the home.
  • By carefully probing the yard every few feet and following the septic pipe across your yard, you should be able to detect any problems.
  • The majority of septic tanks are placed 1 to 3 feet below and are located roughly 10 to 20 feet away from the house.

An electronic metal detector can find the reinforcing bars in a concrete tank if it is built out of concrete.

Please contact us.

We have specialized technology that we can use to pinpoint the location of your tank.

You should make a note of the position of your tank for future reference if you were successful in discovering it.

A riser elevates the septic lid above the ground, making it easier to find and access your septic tank and its contents.

As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, which will help to protect your landscape and save you money.

How to locate a septic tank

A home’s construction year and whether a copy of the septic permit is accessible determine the procedure for locating a septic tank on a property, which might take many weeks or months. Please choose one of the scenarios listed below and follow the instructions.

For homes built in the last five (5) years or less

Obtain a copy of your septic tank permit from your local Department of Health and Human Services office. Please fill out as much of the information below as possible to help us expedite the search:

  • Number of the tax map
  • Lot number
  • Block number
  • Address in the physical world
  • When the system was installed or when the house was built (if this information is available)
  • Name of the original permit holder (if any information is available)
  • Name of the subdivision (if the property is located within a subdivision)

A copy of a septic tank permit can be obtained from a local DHEC office by any individual or group, regardless of whether or not they own the land in question.

For homes older than five (5) years or if a copy of the septic permit was not able to be located.

It is recommended that you call an experienced septic contractor who will come to the site and assist you with the identification of the current septic system. You may find a list of licensed septic installers by clicking here.

Tags

Septic Tank Alerts Septic Tank Alerts

How to Find Septic Tanks

Every septic tank will eventually get clogged with solid waste and will need to be drained and cleaned. Pumping out the septic system on a regular basis is essential to maintaining it in excellent functioning order. But what can you do if you don’t know where the septic tank is? What are your options? How to locate and locate your septic tank will be covered in this section. Septic tanks should not be installed in any one location because each property is unique. Septic tanks are difficult to detect, but there are several principles and indicators that might assist you.

How to Locate Septic Tanks: Using Public Records:

  1. Inquire with the previous owner of the property. This may be the quickest and most convenient method of locating a septic tank. Simply contact the previous owner and inquire as to the whereabouts of his or her septic tank. In spite of the fact that the previous owner should have shared this information with you when selling the home, it is easy to forget normal maintenance data. If you are unable to contact the previous owner or if the previous owner does not know the location of the septic tank, do not give up hope just yet. There are several alternative methods of locating a septic tank
  2. However, Consult the County Records for more information. The county should have a copy of the septic tank installation permit documents for your property on file. This file should include a schematic or map of the property that shows the location of the septic tank. If the septic tank was erected more than a decade ago, the information may or may not be on file. Call a few different septic tank pumping companies in your area. It’s conceivable that your septic tank was installed by a local business or contractor. Check with several businesses to check whether they have your address on file.

How to Identify Septic Tanks on Your Own Septic tanks are hardly the most visually appealing or pleasurable of systems to see. They are installed in such a way that they are hardly visible and are not visually highlighted or exhibited. In the event that your septic tank is actively being concealed, you will have to figure out how to locate it. One method of locating the septic tank is to trace the waste line from the house to the septic tank’s location. Identify where the sewage line departs the home, which is usually in the basement, and then travel to the same location outside the property.

Consider the area where a septic tank is most likely to be found.

  • Usually between 10 and 20 feet away from the structure. It should not be too near for reasons of health and safety. When it comes to building costs, it is preferable to keep excavating to a minimum by not locating it too far away. From the house, it’s all downhill. Gravity is used to transfer waste in the majority of plumbing systems. This is not always the case, however, because certain systems make use of pumps. Is there a well, a stream, or any other site feature on your property that might have an impact on the installation of a septic tank? There cannot be a septic tank in close proximity to wells or the property line. Seek out bald places where there is no grass growth, which might indicate the presence of a shallow-buried septic tank top. Locate any green grass, which may be indicative of a septic tank that is overflowing or leaking
  • Assuming you already know where to go, here’s what you should be looking for now:

How to Locate Septic Tanks Using Visual Indications

  • What is the appearance of a septic tank? Septic tanks are rectangular in shape and measure around 4ft x 8ft. Knowing this, seek for a rectangular depression or a rectangular region of sparse grass growth in a rectangle area of sparse vegetation. When septic tanks are placed shallowly and close to the surface, the outcome is often sparse or uneven grass growth
  • This is due to the fact that they are buried shallowly and close to the surface. Pipes that are unexplained. Air vents and cleanouts are common features of septic systems. If you notice pipes jutting out of the ground, it is possible that they are for the septic system. Copper is not used in the construction of these pipes, which are typically 4 to 6 inches in diameter and composed of cast iron or white or black plastic. Detecting an unpleasant odor implies that you have located the drainfield and that it is failing
  • Wet places that haven’t been explained. if there is an area of your land that is perpetually wet or moist for no apparent reason, it is possible that this is the location of your septic tank. Most of the time, it is accompanied by disagreeable smells. Look for markers such as a stake, stones, or other sorts of objects. In order to indicate the position of the septic tank’s pumpout access, it is customary practice to post a marker. Boxes for electrical equipment. Pumps and grinders are commonly seen in septic tanks that are powered by electricity. If you have an electrical connection or box protruding from the ground distant from the home and are unsure what it is for, it is possible that it is for the septic system
  • Lush green grass
  • Or irrigation system. This might be the case if your property has a single patch with especially lush green grass and you have not watered or fertilized it. If this is the case, the septic tank may be positioned in this location. Unfortunately, that lush green grass indicates that you are experiencing seepage from your septic tank
  • Nonetheless, Random dirt depressions in the earth, each measuring around 2 square feet, which may indicate a former excavation for tank pumping

If you are still unable to locate the septic tank, it is likely that you should contact a professional. A professional sewer tank plumber will locate and service septic systems on a regular basis and will be equipped with the required equipment and knowledge to locate your home’s septic tank swiftly and efficiently. Don’t be tempted to lift the lid or conduct any other work on your septic tank now that you know where to look. Septic tank lids are extremely heavy, and septic tanks emit harmful vapors.

Always get your septic tank serviced by a licensed and insured septic tank plumber.

After you’ve discovered your septic tank, mark the location with a marker and draw a map of the area around it so that you and any future owners will know exactly where it is in case it has to be repaired or replaced.

Post Navigation

You know your septic system drainfield is out there� but just where is it? It is important to locate it so you can avoid damaging it by:
  • Building a road over the drainfield
  • Parking or operating heavy equipment on the drainfield
  • Planting trees or bushes in close proximity to a drainfield is prohibited. Creating soil disturbances through a landscaping project or the presence of cattle

In addition, knowing where your drainfield is located allows you to inspect the drainfield for symptoms of trouble, such as damp soil and foul aromas. You should obtain a copy of the record sketch for your particular system. It is a diagram that shows where the various components of your septic system are placed. This diagram was previously referred to as a “as-built” or “record drawing.” You can obtain further information by contacting the Thurston County Permit Assistance Center (PAC) at 360-786-5490 or by downloading the Request for Record Drawing/Permit Information form.

SW in Olympia, Washington (PAC Hoursof Operation-LimitedHours Please Check Before You Leave).

This is the tax identification number that appears on your county tax bills.

(If you do not know your tax parcel number, contact the County Assessor’s office.) The level of detail and quality of the record drawings varies substantially.

a more recent diagram will indicate the tank, drainfield, replacement area (which will be used in the future if a replacement field is required), and any additional components of your system, such as a pump chamber or mound It is also possible to record the dimensions of the tank and the length of the drainfield lines.

  • If you don’t water your grass in the late summer, you may notice green stripes in your yard as a result. These are the regions that are prone to flooding along the drainfield pipes. When it is cold outside, the regions above your pipes may be the first spots where frost melts in your yard. Do you have any ports for monitoring or clean-outs? These are tubes or pipes with a white cap that are cut off at or near the ground level. Drainfield pipes include liquid level indicators that are situated at the ends of the pipes, which allow you to monitor the amount of liquid in the pipes. Examine the regions leading away from the septic tank with great caution. Avoid the use of heavy steel wrecking bars or other probing equipment that might cause damage to the septic tank top or other components of the system. Take note of any signs you see, such as shallow, parallel depressions that may indicate drainfield trenches. The installation of a drainfield among huge trees or in particularly rough terrain is quite unlikely. Examine the area beneath the home where the sewer line emerges from the foundation. The septic tank is typically located within 10 feet of the foundation
  • However, this might vary. Engage the services of a competent business to send down echo-locators
For more information on troubleshooting problems,contact the Septic Help Line at 360-867-2669.

A Beginner’s Guide to Septic Systems

  • Septic systems are used to dispose of waste from homes and buildings. Identifying the location of the septic tank and drainfield
  • What a Septic System Is and How It Works Keeping a Septic System in Good Condition
  • Signs that a septic system is failing include:

Septic systems, also known as on-site wastewater management systems, are installed in a large number of buildings and houses. It is easy to lose sight of septic systems, which operate quietly, gracefully, and efficiently to protect human and environmental health due to their burying location. Septic systems are the norm in rural regions, but they may also be found in a lot of metropolitan places, especially in older buildings. It is critical to understand whether or not your building is on a septic system.

Is Your Home or Building on a Septic System?

It is possible that the solution to this question will not be evident. If a structure looks to be connected to a sewage system, it may instead be connected to a septic system. It is fairly unusual for tenants to be unaware of the final destination of the wastewater generated by their residence. Some of the hints or signs listed below will assist in determining whether the facility is served by a septic system or whether it is supplied by a sewer system:

  • Sewer service will be provided at a cost by the city or municipality. Pay close attention to the water bill to see whether there is a cost labeled “sewer” or “sewer charge” on it. If there is a fee for this service, it is most likely because the facility is connected to a sewage system. Look up and down the street for sewage access ports or manholes, which can be found in any location. If a sewage system runs in front of a property, it is probable that the house is connected to it in some way. Inquire with your neighbors to see if they are connected to a sewer or septic system. The likelihood that your home is on a sewer system is increased if the properties on each side of you are on one as well. Keep in mind, however, that even if a sewage line runs in front of the structure and the nearby residences are connected to a sewer system, your home or building may not be connected to one. If the structure is older than the sewer system, it is possible that it is still on the original septic system. Consult with your local health agency for further information. This agency conducts final inspections of septic systems to ensure that they comply with applicable laws and regulations. There is a possibility that they have an archived record and/or a map of the system and will supply this information upon request

All property owners should be aware of whether or not their property is equipped with an on-site wastewater treatment system. Georgia law mandates that the property owner is responsible for the correct operation of a septic system, as well as any necessary maintenance and repairs.

Locating the Septic Tank and Drainfield

Finding a septic system may be a difficult process. They can be buried anywhere in the yard, including the front, back, and side yards. After a few years, the soil may begin to resemble the surrounding soil, making it impossible to distinguish the system from the surrounding soil. It is possible that in dry weather, the grass will be dryer in the shallow soil over the tank and greener over the drainfield, where the cleansed water will be released, but this is not always the case, especially in hot weather.

  • The contractor who built the house should have presented the initial owner with a map showing the tank and drainfield locations, according to the building code.
  • The installation of the system, as well as any modifications made to it, would have been examined by your local health authority.
  • Unfortunately, if the system is very old, any records related with it may be insufficient or nonexistent, depending on the situation.
  • Look for the point at where the wastewater pipes join together if the building is on a crawlspace or has an unfinished basement.
  • The sewer line that runs through the structure is referred to as the building sewer.
  • To “feel” for the tank, use a piece of re-bar or a similar metal probe.
  • If you use this free service, you may avoid accidentally putting a rod through your gas or water line.

Try to locate the tank after a rainstorm, when the metal probe will be more easily maneuvered through moist dirt.

This should be done with care; extreme caution should be exercised to avoid puncturing the building sewer.

A tank is normally 5 by 8 feet in size, however the dimensions might vary.

Be aware that there may be rocks, pipes, and other debris in the area that “feels” like the tank but is not in fact part of the tank.

However, it is possible to have the lid or access port positioned on a riser in addition to being on the same level as the top of the tank in some cases.

Once the tank has been identified, make a rough drawing of its placement in relation to the house so that it will not be misplaced again!

It may be easier to discover the drainage lines now that the tank has been identified, particularly if the area has been subjected to prolonged periods of drought.

How a Septic System Works

Typical sewage treatment system (figure 1). It is composed of three components (Figure 1): the tank, the drain lines or discharge lines, and the soil treatment area (also known as the soil treatment area) (sometimes called a drainfield or leach field). The size of the tank varies according to the size of the structure. The normal home (three bedrooms, two bathrooms) will often include a 1,000-gallon water storage tank on the premises. Older tanks may only have one chamber, however newer tanks must have two chambers.

  • The tank functions by settling waste and allowing it to be digested by microbes.
  • These layers include the bottom sludge layer, the top scum layer, and a “clear” zone in the center.
  • A typical septic tank is seen in Figure 2.
  • It is fortunate that many of the bacteria involved are found in high concentrations in the human gastrointestinal tract.
  • Although the bacteria may break down some of the stuff in the sludge, they are unable to break down all of it, which is why septic tanks must be cleaned out every three to seven years.
  • In addition, when new water is introduced into the septic tank, an equal volume of water is pushed out the discharge lines and onto the drainfield.
  • The water trickles out of the perforated drain pipes, down through a layer of gravel, and into the soil below the surface (Figure 3).
  • A typical drainfield may be found here.
  • Plants, bacteria, fungus, protozoa, and other microorganisms, as well as bigger critters such as mites, earthworms, and insects, flourish in soil.
  • Mineralogical and metallic elements attach to soil particles, allowing them to be removed from the waste water.

Maintaining a Septic System

The most typical reason for a septic system to fail is a lack of proper maintenance. Septic systems that are failing are expensive to repair or replace, and the expense of repairs rests on the shoulders of the property owner (Figure 4). Fortunately, keeping your septic system in good working order and avoiding costly repairs is rather simple. Figure 4. Septic system failure is frequently caused by a lack of proper maintenance. It is in your best interests to be aware of the location of the system, how it operates, and how to maintain it.

  1. You should pump the tank if you aren’t sure when the last time it was pumped.
  2. It is not permissible to drive or park over the tank or drainage field.
  3. No rubbish should be disposed of in the sink or the toilet.
  4. It’s important to remember that garbage disposals enhance the requirement for regular pumping.
  5. When designing a landscape, keep the septic system in mind.
  6. It is also not recommended to consume veggies that have been cultivated above drainfield lines (see Dorn, S.
  7. Ornamental Plantings on Septic Drainfields.

C 1030).

Any water that enters your home through a drain or toilet eventually ends up in your septic system.

Don’t put too much strain on the system by consuming a large amount of water in a short period of time.

Additives should not be used.

Various types of additives are available for purchase as treatment options, cleansers, restorers, rejuvenator and boosters, among other things.

To break up oil and grease and unclog drains, chemical additives are available for purchase.

Pumping out the septic tank is not eliminated or reduced by using one of these systems.

They remain floating in the water and travel into the drainfield, where they may block the pipes. Acids have the potential to damage concrete storage tanks and distribution boxes.

Signs a Septic System is Failing

A failed system manifests itself in the following ways:

  • Sinks and toilets drain at a snail’s pace
  • Plumbing that is backed up
  • The sound of gurgling emanating from the plumbing system House or yard aromas that smell like sewage
  • In the yard, there is wet or squishy dirt
  • Water that is gray in hue that has accumulated
  • An region of the yard where the grass is growing more quickly and is becoming greener
  • Water contaminated by bacteria from a well

If you notice any of these indicators, you should notify your local health department immediately. An environmentalist from the health department can assist in identifying possible hazards. There are also listings of state-certified contractors available from the local health department, who may do repairs. Repairs or alterations to the system must be approved by the health department and examined by an inspector. Keep an eye out for any meetings that may take place between a health department inspector and a contractor to discuss repairs to your system.

  1. Household garbage that has not been properly handled is released into the environment when systems fail.
  2. It has the potential to pollute surrounding wells, groundwater, streams, and other sources of potable water, among other things.
  3. The foul odor emanating from a malfunctioning system can cause property values to plummet.
  4. Briefly stated, broken systems can have an impact on your family, neighbors, community, and the environment.
  5. Septic systems are an effective, attractive, and reasonably priced method of treating and disposing of wastewater.

Figures 2 and 3 reprinted with permission from: CIDWT. 2009. Installation of Wastewater Treatment Systems. Consortium of Institutes for Decentralized Wastewater Treatment. Iowa State University, Midwest Plan Service. Ames, IA.

History of the current status and revisions Published on the 15th of August, 2013. Published on March 28th, 2017 with a full review.

Online Septic Search

For residents in Indian River County as well as contractors and realtors, Septic SearchTMis a free web service that may be accessed over the Internet. This service will assist agencies, homeowners, buyers, sellers, contractors, and real estate agents in knowing more about the existing septic systems and wells in their communities. The Indian River County Department of Health has made its septic system and water well documentation available to the public on the internet. Site plans that were scanned are accessible for permits that were granted after January 1, 2000.

  • Obtaining applications, permits, repairing or replacing an existing system, site evaluations, and inspections

To look for information on current septic systems and wells, go to the following website:

  1. Indian River County is a good choice. then pick Records Search from the drop-down menu. In the Indian River County Property Appraiser’s database, you may search by address or tax parcel number. Once your property has been located, click on View History. SelectView to show the scanned documents that are currently accessible for the property
  2. The green arrow at the top of each document allows you to navigate through the other papers after they have been opened.

If you require assistance or have any questions, please call the Environmental Health Office at (712) 794-7440 or send an email.

Florida Department of Health in Martin

The FDOH-Martin County grants permits and conducts inspections for the following activities:

  • The installation of all new and repaired septic systems
  • Renovated structures
  • Structures that are slated for renovation Units for aerobic therapy
  • Businesses that are engaged in industrial, manufacturing, or commercial activity are classified as Pump trucks for septic tanks

More information about septic systems may be found at the following websites: On-Site Sewage Treatment by the FDOH Martin County Code: information on codes and their application. “septic” is a search term. Access to a septic system and a well Detailed information on your property: Locate your septic system or well and mark its position.

Use Ebridge Solutions to complete the following steps: Ebridge Public is the name of the user account. public is the password (password is lowercase) Martin County has a filing cabinet. Login by clicking on the Login button.

  • Select the appropriate permit type from the drop-down menu at the top of the page by clicking Retrieve at the top of the page. There are two (2) categories to choose from: Septic System and Well
  • You must provide the property address (house number), street name (without north, east, west, or south), and any additional information such as the lot, block, and subdivision in the appropriate fields. Ordinarily, putting only a house number is a good idea since it will bring up two or three houses for you to pick from
  • However, including a street address is also a good option.

Once you have gained access to information on your property, you will be able to rotate the site plans by clicking on the buttons at the top of the page. Moreover, you have the option to print off your data or send it to your contractor by e-mail. We have thousands of permits that have been submitted. Updates will be made on a regular basis. We encourage you to call us at 772-221-4000, option 5, if you are having trouble locating your permission.

Leave a Comment

Your email address will not be published. Required fields are marked *