Where Can I Purchase A Septic Tank? (Perfect answer)

menards.com

  • Plastic-Mart offers rotationally molded polyethylene septic tanks from Norwesco, Rotonics, Ace-Roto Mold Snyder Industries. If you have any questions or would like to buy a septic tank you can do so online or call our sales department toll free at 866-310-2556.

What is the cheapest septic tank?

Types of Septic Tank Systems These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

How much does a thousand gallon plastic septic tank cost?

A typical 1,000-gallon tank installation for a 3-bedroom home ranges from $2,100 to $5,000. Materials cost between $600 and $2,500 without labor. A complete septic system, including a leach field, tank and piping costs $10,000 to $25,000.

Does Walmart have septic tanks?

Norwesco 41721 1000 Gallon Two Compartment Yellow Septic Tank – Walmart.com.

What are the alternatives to septic tanks?

Alternative Septic Systems

  • Raised Bed (Mound) Septic Tank Systems. A raised bed drain field (sometimes called a mound) is just like what it sounds.
  • Aerobic Treatment Systems (ATS) Aerobic systems are basically a small scale sewage treatment system.
  • Waterless Systems.

Is a plastic septic tank better than concrete?

Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.

What is the smallest septic tank I can buy?

If you’re looking to install a septic system, the smallest tank size you’re likely to find is 750-gallon, which will accommodate one to two bedrooms. You can also opt for a 1,000-gallon system, which will handle two to four bedrooms.

How big of a septic tank do I need?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How do you use Instant Power septic treatment?

GENERAL USE: Septic tanks or cesspools of 500 – 1,000 U.S. Gallon capacity: Pour and flush 1/4 Cup (4 Tablespoons) of Instant Power down your toilet once a week. Positive results should be seen within 2 – 4 weeks. To maintain system, use same application weekly.

Plastic Septic Tanks

Ace, Norwesco, and Snyder Industries brand septic tanks are available at Tank Depot at competitive prices. Norway-based Norwesco has been manufacturing polyethylene septic tanks since 1980. Norwesco is the world’s biggest maker of polyethylene tanks. Norwesco has a wealth of knowledge and expertise to give you goods that have been tested and proved to provide years of dependable, trouble-free service. State and municipal health officials from coast to coast have certified Norwesco septic tanks, which are covered by a three-year warranty and have been in use for decades.

NORWESCO BELOW GROUND TANKS – Conversion OptionInformation about NORWESCO BELOW GROUND TANKS Choosing a location for the installation of your Plastic Septic Tank When purchasing a septic tank, it is important to examine the following characteristics.

Installation is a breeze.

Any Norwesco septic tank may be delivered to the project site in a pickup truck and handled by just two persons, depending on the model.

  • Construction is made of a single piece of rotationally molded plastic.
  • Design for Exceptional Strength The design of the ribs and the location of the ribs give the tank with exceptional structural stability.
  • Norwesco’s stringent quality control measures ensure that its septic tanks are safe for the environment.
  • 750, 1000, 1250, and 1500 gallon tanks are offered as single compartment or double compartment tanks (2/3 – 1/3) depending on your needs.
  • Pre-plumbed / ready to be put into service Norwegian Septic Tanks (750 gallons and greater) are delivered to you fully assembled and ready to be installed.
  • Tees are measured and cut to meet the requirements of each state code, ensuring that the tank you get is ready for installation.
  • This upgraded design outperforms existing lid designs in terms of strength and durability.

The gasket ensures a watertight seal around the opening of the lid. Accessory options are available. Manhole extensions and lid-riser combinations are offered to bring tank access up to code standards and to bring tank access up to code standards.

Plastic Septic Tanks

Plastic-Mart.com is one of the nation’s top suppliers of plastic septic tanks, offering a diverse selection of goods from the most dependable manufacturers in the business. When looking for a sewage holding tank for a residential or business installation, rotomolded plastic septic tanks made of polyethylene resins are an excellent choice. Our rotational molding technology creates better, stronger plastic tanks at a far lower cost than our competitors’ processes. We provide ribbed septic tanks for in-ground usage, as well as a large choice of other septic tank accessories.

Septic tanks are used for a variety of purposes, including holding tanks, waste storage tanks, and more.

We even offer plastic septic tanks that can be sent in as little as 48 hours, such as:

  • Plastic Septic Pump Tanks: 200 Gallon Plastic Septic Pump Tank
  • 300 Gallon Sphere Pump Tank
  • 500 Gallon Low Profile Plastic Septic Tank
  • 1000 Gallon 2 Compartment Plastic Septic Tank
  • 200 Gallon Low Profile Plastic Septic Pump Tank
As one of America’s leading septic tank suppliers, we have locations spread throughout the U.S. for pick up and we offer direct drop ship straight to your door as well. Email or give us a call toll free at866-310-2556for plastic septic tank selection assistance.NORWESCO BELOW GROUND TANKS – Conversion OptionInformationSelecting an installation site for your Plastic Septic TankPlastic-Mart offers rotationally molded polyethylene septic tanks fromNorwesco, Rotonics,Ace-Roto MoldSnyder Industries. If you have any questions or would like to buy a septic tank you can do so online or call our sales department toll free at866-310-2556.

Underground Septic Tanks – Below Ground Holding Tanks

Underground Plastic Septic Tanks are available for purchase online at the lowest possible costs, saving you up to 50%. Underground septic tanks are also known as sewer tanks, below-ground septic tanks, waste holding tanks, cesspool tanks, cesspits, bulk sewage tanks, and black water tanks, among other names. They are used to keep human waste, sewage, and blackwater contained and out of the environment. These septic tanks are intended for usage in residential and commercial situations where sewer lines have not yet been installed by the local municipality.

  • They also function as the only sewage containment vessel for recreational vehicles and trailer houses, according to the manufacturer.
  • Norwesco, Ace Roto-Mold, and Snyder are among the companies that produce these sewage tanks.
  • Tanks that are smooth, sturdy, and impact resistant are produced by the rotational molding method.
  • In order to function properly as part of a septic system, these septic tanks are intended for burial underground or in a man-made mound.
  • They are available in the colors yellow, black, light green, and grey.
  • Because of these characteristics, the tanks have had a long useful life.
  • Tanks ranging in size from 200 gallons to 500 gallons can have an inlet and outlet installed for $75.00.
  • Tanks with capacities ranging from 750 gallons to 1500 gallons are required to have a 4″ inlet and outlet.
  • Additionally, every septic tank is protected under the terms of a three-year manufacturer’s guarantee.

At the National Tank Outlet, you’ll find the lowest rates on underground septic tanks for sale anywhere. Shop our most popular sizes, which are as follows: Septic tanks in sizes of 1000 gallon and 1500 gallon are available.

Septic Tanks

Despite the fact that city sewage systems can be found practically everywhere and are the most frequent method of disposing of waste, there is an option for those residential and business users who do not have access to a sewage system or do not want to connect to one. With the help of a plastic sewage treatment tank from PlumbersStock, a building may be erected nearly anywhere without the need for a substantial plumbing infrastructure. Norwesco is one of our favorite brands, and we are pleased to provide it to you at a competitive price.

How Does a Septic Tank Work?

There are several types of septic tanks, the most common of which is the bury tank (at least a1,000 gallons). A little portion of it is buried in the earth near the structure. Located within plastic septic tanks are two independent storage chambers that are separated at the bottom by an opening, but are open to each other at the top. Using a pipe, the tank is linked to the building or residence, and when waste is flushed down the toilet or washed down the drain, it is brought into the tank and disposed of properly.

  • As the solids in the first chamber continue to accumulate and settle, they are broken down and transformed into a fluid by the action of gravity.
  • Once the fluids have passed through the first chamber and into the second chamber, they are free to exit the tank.
  • Leach lines are used in conjunction with plastic septic tanks to transport the waste away from the tank.
  • The liquid waste is transported down the leach line, which then leaches the waste into the surrounding soil and groundwater.
  • Its capacity is 5.2 cubic feet for the ADS ARC 24-inch model and 8 cubic feet for the ADS ARC 36-inch model.

Tank Maintenance

When it comes to operating a septic tank, it is necessary to do regular maintenance in order for it to continue to function effectively. Consequently, because waste and sediments enter the tank and must be decomposed by anaerobic bacteria, a blockage at the bottom of the tank is frequently experienced. A sewage pump is used to empty the tank regularly, even though this is an issue that affects all plastic septic tanks of the same type. A septic tank pumping is an essential part of maintaining the system’s functionality and efficiency.

Despite the fact that pumping plastic septic tanks is required, there are tank solutions available that are meant to aid in the breakdown of particles.

These goods may be flushed down the toilet and will offer the bacteria necessary for the septic tank to function properly. These products should only be used to aid in the breakdown of solids and should not be used to completely replace regular tank pumping.

Buy Plastic Septic Tanks Wholesale

Make sure you utilize PlumbersStock for all of your septic tank requirements. We have the most competitive pricing on the internet, and we have a large selection of tanks for you to pick from. A variety of maintenance goods, as well as leach line products, are now available, allowing you to purchase everything you need in one convenient location. PlumbersStock is the place to go if you want water and septic solutions at a reasonable price. Also check out our extensive variety of water storage tanks.

Precast Concrete Septic Tanks vs. Plastic Septic Tanks

When it comes to selecting a septic tank for your property, there are several alternatives to consider. First and foremost, you want to be sure that the tank you choose has the appropriate capacity for your home. After that, you’ll want to be certain that you select a tank that will give years of dependable service for you and your family members. A precast concrete septic tank is the most suitable option. Precast septic tanks provide several advantages over other types of tanks, such as plastic, steel, or fiberglass.

See also:  How Hard Is It To Move A Septic Tank? (TOP 5 Tips)

The Benefits Of A Precast Septic Tank

  • The tanks weigh a great deal. While this may be considered a disadvantage by some, we feel it is one of the most significant advantages of using carbon fiber over other materials. Because of the weight of the precast concrete septic tank, it will never “float” to the surface, which is something that certain lesser weight tanks may accomplish in certain scenarios. Precast concrete septic tanks have a specific gravity of 2.40, which makes them more resistant to buoyant forces than other septic tank materials. HDPE has a specific gravity of 0.97, which is very high. For anchoring structures composed of more buoyant materials, further labor-intensive and time-consuming on-site preparation is required. When selecting a septic tank for your property, it is important to consider the following factors: Precast septic tanks do not rust, which is a major concern. Steel tanks, as well as portions of some plastic and fiberglass tanks, are extremely susceptible to corrosion and failure. Unlike traditional concrete, precast concrete gradually gains strength over time. Other materials, such as steel or high-density polyethylene (HDPE), can degrade and lose their strength. The contents of precast concrete storage tanks may be pumped out without the risk of the tank collapsing. The process of installation is basic and uncomplicated. Shea Concrete offers a staff of tank installers that have completed hundreds of tank installations in the past. We are well-versed in site preparation and are capable of overcoming virtually any installation challenge. In addition, we have vehicles that are fitted with hoists and can even crane a tank over a house when necessary
  • Concrete, along with water, is the most widely utilized building material on the planet. This natural substance is non-toxic, ecologically safe, and comprised entirely of natural materials, making it an excellent choice for septic tanks. Concrete is employed in a variety of applications throughout the country and has no negative impact on the quality of groundwater or surface water. During the installation process, plastic tanks are susceptible to damage. In most cases, the installation process is to blame for tank failures
  • Precast concrete tanks can be made watertight if they are manufactured in accordance with the National Precast Concrete Association’s “Septic Tank Manufacturing” Best Practices Manual and/or ASTM C 1227, “Standard Specification for Precast Concrete Septic Tanks.” In accordance with these industry standards, which Shea Concrete adheres to, the required processes to be followed during the fabrication of waterproof tanks are specified. It is never acceptable to drive an automobile over a plastic storage tank. This may set restrictions on the location of the tank and leaching area on your land.

Why A Concrete Septic Tank?

Concrete septic tanks are preferable than fiberglass or plastic septic tanks because they are waterproof and heavy duty, making them the preferred storage vessel for on-site sewage storage and treatment over the other materials. In the United States, there are over 40 million septic systems in operation. Septic systems rely on the soil surrounding the septic tank, which is the major component in a septic system, to filter the wastewater discharged from the tank. Concrete septic tanks are also well-known for the following characteristics, in addition to the advantages described above:

  • Strength improves with time
  • Durability
  • Ease of installation
  • Low susceptibility to damage during the backfill process

Shea Concrete Septic Tanks

The Shea Concrete Company has been building and installing precast concrete septic tanks for more than 65 years. Shea has a comprehensive variety of septic, cistern, and pump tanks in capacities ranging from 500 to 55,000 gallons, with the most of these sizes being transported by our company trucks, as well. Underground tanks for sewage storage that are safe and long-lasting are manufactured by us at a competitive price. If you are thinking about upgrading or installing a new system, we would be delighted to speak with you.

SEPTIC TANKS

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP CAPACITY WEIGHT SPECIFICATIONS CHAMBERS
41820 $1,900.00 1,000 GALLON 403 lbs 102″L x 60″W x 63″H 2
41821 $2,700.00 1,250 GALLON 467 lbs 116″L x 55″W x 70″H 2
41822 $2,475.00 1,500 GALLON 589 lbs 135″L x 55″W x 70″H 2
62397 $100.00 Manhole Extension 15″H x 20″D
62396 $115.00 Manhole Extension 24″H x 20″D

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP CAPACITY DIMENSIONS MANHOLE DIAMETER CHAMBERS
43522 $950.00 500 GALLON 97″ x 48″ x 42″ 20″ 1
44510 $1,695.00 750 GALLON 92″ x 60″ x 51″ 20″ 2
44482 $1,890.00 1,000 GALLON 127″ x 60″ x 51″ 20″ 2
44483 $1,975.00 1,250 GALLON 157″ x 60″ x 51 “ 20″ 2
44484 $2,755.00 1,500 GALLON 157″ x 69″ x 51″ 20″ 2
63833 $125.00 Manhole Extension 15″ TALL x 20″ D
63834 $135.00 Manhole Extension 24″ TALL x 20″ D

TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE

PART NO. ALPINE PICKUP SPECIFICATIONS
63833 $80.00 15″TALL x 20″D
63834 $90.00 24″TALL x 20″D

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP GALLON CAPACITY WEIGHT DIM CHAMBERS
AST-0300-1R $550.00 300 Gallon Pump Tank 134 lbs 54″ x 56″ 1
AST-0500-1R $695.00 500 Gallon Pump Tank 197 lbs 63″ x 74″ 1
AST19212 $110.00 35 lbs Manhole Extension32.5″ x 16″

To see the PDF drawing, please choose the appropriate part number from the list below. TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE

PART NO. ALPINE PICKUP WEIGHT SPECIFICATIONS CHAMBERS
AST-0750-1R $915.00 259 lbs 60 x 70 x 60 1
AST-1000-2P $1,820.00 448 lbs 60 x 101 x 60 2
AST19212 $110.00 35 lbs Manhole Extension32.5″ x 16″

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING * TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE HOME SCREEN.

PART NO. ALPINE PICKUP WEIGHT SPECIFICATIONS DIMENSIONS
AST19212 $65.00 35 lbs 16″ Access Extension – Black 32.5 x 16

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE. NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP COLORS CAPACITY WEIGHT DIM LID FITTINGS CHAMBERS
LP0300-HT $635.00 White 300 Gallon Holding Tank 132 56 x 95 x 16 6″ 3″ 1

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP CAPACITY MANHOLE SPECS
44079 $4,970.00 2,500 GALLON 20″ 159″L x 99″W x 51″H
44390 $7,075.00 3,525 GALLON 20″ 211″L x 102″W x 51″H
44876 $10,425.00 5,025 GALLON 20″ 211″L x 102″W x 73″H
63833 $125.00 Manhole Extension 20″D x 15″ TALL
63834 $135.00 Manhole Extension 20″D x 24″ TALL

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP SPECIFICATIONS
63833 $80.00 15″TALL x 20″D
63834 $90.00 24″TALL x 20″D

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS
GBF0500 $900.00 500 72″ Diameter 55″ 2

TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT INLET A OUTLET B
GBF1250 $1,500.00 1,250 137″ 72″ 60″ 54″ 49″
*1250 Gallon Septic Tank is listed with IAPMO “A” = Measurement from the bottom of the inlet pipe to bottom of tank “B” = Measurement from the bottom of the inlet pipe to the bottom of the tank. Inlet and outlet pipes = 4″ SDR-35 P.V.C.

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS

TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS
GBF2000 $3,235.00 2,000 144″ 84″ 84″ 2

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE HOME SCREEN.

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS

Septic Tank Installation and Pricing

To process and dispose of waste, a septic system has an underground septic tank constructed of plastic, concrete, fiberglass, or other material that is located beneath the earth. Designed to provide a customized wastewater treatment solution for business and residential locations, this system may be installed anywhere. Although it is possible to construct a septic tank on your own, we recommend that you hire a professional to do it owing to the amount of skill and specific equipment required.

Who Needs a Septic Tank?

For the most part, in densely populated areas of the nation, a home’s plumbing system is directly connected to the municipal sewer system. Because municipal sewer lines are not readily available in more rural regions, sewage must be treated in a septic tank. If you’re moving into a newly constructed house or onto land that doesn’t already have a septic tank, you’ll be responsible for putting in a septic system on your own.

How to Prepare for Your Septic Tank Installation

Here are a few pointers to keep in mind to make sure your septic tank installation goes as smoothly as possible.

Receive Multiple Estimates

Receiving quotations from licensed septic tank installers and reading reviews about each firm using trustworthy, third-party customer evaluations should be done before any excavation or signing of any paperwork is done. Examine your options for a contractor and make sure they have the appropriate insurance and license, as well as the ability to include critical preparations such as excavation and drain field testing in their quotation.

Test the Soil and Obtain a Permit

For septic systems to function properly, permeable soil surrounding the tank must absorb and naturally handle liquid waste, ensuring that it does not pollute runoff water or seep into the groundwater. The drain or leach field is the name given to this region. Before establishing a septic tank, you are required by law to do a percolation test, sometimes known as a “perc” test. This test indicates that the soil fits the specifications established by the city and the local health agency. In most cases, suitable levels of permeable materials, such as sand or gravel, are necessary in a soil’s composition.

Note: If you wish to install a septic tank on your property, you must first ensure that the ground passes the percolation test. Prior to acquiring the land that you want to utilize for residential purposes, we recommend that you obtain a soil test.

Plan for Excavation

Excavation of the vast quantity of land required for a septic tank necessitates the use of heavy machinery. If you are presently residing on the property, be careful to account for landscaping fees to repair any damage that may have occurred during the excavation process. Plan the excavation for your new home at a period when it will have the least influence on the construction process if you are constructing a new home. Typically, this occurs before to the paving of roads and walkways, but after the basic structure of the home has been constructed and erected.

The Cost of Installing a Septic Tank

There are a few installation charges and additional expenditures connected with constructing a new septic system, ranging from a percolation test to emptying the septic tank and everything in between.

Percolation Test

The cost of constructing a new septic system includes a variety of fees and expenditures ranging from a percolation test to emptying the septic tank, among other things.

Building Permit Application

A permit will be required if you want to install a septic tank on your property. State-by-state variations in permit prices exist, however they are normally priced around $200 and must be renewed every few years on average.

Excavation and Installation

When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally placed. The cost of a new septic system is determined by the size of your home, the kind of system you choose, and the material used in your septic tank. The following is a list of the many treatment methods and storage tanks that are now available, as well as the normal pricing associated with each.

See also:  How Much Is A 1500 Gallon Septic Tank To Pump?

Types of Septic Tank Systems

Septic system that is used in the traditional sense Traditionally, a septic system relies on gravity to transport waste from the home into the septic tank. Solid trash settles at the bottom of the sewage treatment plant, while liquid sewage rises to the top. Whenever the amount of liquid sewage increases over the outflow pipe, the liquid waste is discharged into the drain field, where it continues to disintegrate. This type of traditional septic system is generally the most economical, with an average cost of roughly $3,000 on the market today.

Drain fields for alternative systems require less land than conventional systems and discharge cleaner effluent.

Septic system that has been engineered A poorly developed soil or a property placed on an uphill slope need the installation of an engineered septic system, which is the most difficult to install.

It is necessary to pump the liquid waste onto a leach field, rather than depending on gravity to drain it, in order to ensure that it is equally dispersed across the land. The average cost of these systems is roughly $8,000.

Types of Septic Tanks

  • Concrete septic tanks are long-lasting and rust-proof, but they are difficult to repair if they are damaged. It is possible that concrete tanks will cost up to $2,000 depending on their size. Plastic —While plastic tanks are cost-effective, they are also susceptible to damage. They are around $1,200 in price. Fiberglass —While fiberglass septic tanks are more durable than their plastic counterparts, they are susceptible to shifting or displacement if the water table rises to an excessive level. Depending on the model, these tanks may cost up to $2,000

More information may be found at: Septic Warranty Coverage and Costs.

Using Your Septic Tank

It is important to maintain the area around your new septic tank’s drain field and to frequently check your tank using the lids included with it. Never use a trash disposal in conjunction with your septic tank since it might cause the system to clog. Additionally, avoid driving over the land where your septic tank is located or putting heavy gear on top of your septic tank or drain field to prevent damage. Most of the time, after five years of septic system use, you’ll need to arrange a cleaning and pumping of the system.

Send an email to our Reviews Team [email protected] if you have any comments or questions regarding this post.

Concrete Septic Tanks Are Probably The Best Option — Build With a Bang

Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years.

  • Waste flow, home size, square footage, number of bedrooms, number of bathrooms, and a few other factors are taken into consideration in septic tank size recommendations and charts.
  • Septic tanks are available in a variety of sizes, and you can even obtain tanks that are smaller than 1000 gallons; however, we recommend that you go with a tank that is at least 1000 square feet in size.
  • Consult with a licensed expert before purchasing or installing any equipment if you’re going to install a new septic tank or septic system for the first time.
  • ” A few of states are now requiring 1000 gallon tanks as the minimum size requirement.

The popularity of the concrete septic tank can be attributed to its strength, weight, and longevity. For more precise information on durability, concrete septic tanks that are correctly constructed have a lesser probability of breaking, cracking, or floating.

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.

Heavy Duty Options

Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.

Installation Requirements

Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different.

Lifespan and Durability

The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.

1250 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can suit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank varies depending on its dimensions. 1000 gallon concrete precast tanks are typically 5′ 1″ x 8′ 2″ x 5′ 8″ in size and weigh around 9,000 lbs. Some of the most common 1000 gallon concrete precast tanks are approximately 5′ 1″ x 8′ 2″ x 5′ 8″.

Examples of Jensen Precast products in various locations around the United States are shown below. Approximately 9 1/2 feet in depth, however this varies according on the distributor, state, and local statutes enacted.

1500 Gallon Concrete Septic Tank

Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:

  • In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflow of effluent might cause problems by mistakenly combining the settled solid waste with oils, scum, and effluent. Make sure no sewage gases are allowed to enter the sewer line. These gases have the potential to infiltrate back into a home or structure, generating a foul odor.

Outlet Baffles

Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:

  • Preserving the septic tank by keeping scum, oils, and solid waste contained inside
  • It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.

Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.

As a result, it’s important to contact with a septic installation specialist before making a final decision on a certain material. The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.

Float

Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.

See also:  Septic Tank System What Happen If Drain Field Too Short? (TOP 5 Tips)

If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.

What Homeowners Should Know about Septic Tanks

If you own a house with a septic tank or are considering purchasing a home with a septic tank, it is critical that you understand how this system operates on your property. What the benefits and drawbacks of having a septic tank are, where you could find one in South Florida, and what buyers should know about septic tanks before acquiring a house that has one are all covered in this article.

What Is a Septic Tank?

A septic tank is a waterproof container that is buried beneath your home or business property. The purpose of this tank, which is often constructed of concrete, fiberglass, or polyethylene, is to collect and store wastewater and garbage generated by your home. Everything that goes down a drain ends up in your septic tank, from your kitchen sink to your showers and toilets to your garbage disposal. When wastewater enters the septic tank, solids separate and settle to the bottom, forming sludge, while oil and grease separate and float to the top, forming scum.

Even the wastewater is discharged into the drain field, where it is cleansed by the soil before reaching the groundwater table and becoming drinkable.

What Are the Pros and Cons of a Septic Tank?

Septic tank systems have a number of advantages and disadvantages that should be addressed before acquiring a house with a septic tank system or connecting a home to the municipal sewage system. The following are some of the advantages of a septic tank system:

  • It is useful in regions where access to a sewer is either too expensive or unattainable. Installing and maintaining it is rather inexpensive. Water bills were reduced, and sewage fees were abolished.

The following are some of the disadvantages of a septic tank system:

  • It is not possible to flush anything into the toilet tank that cannot be organically decomposed (such as hair, dental floss, grease, fat, diaper wipes, paper towels, and so on). It is not permitted to clean with bleach or other strong chemicals. Expenses associated with pumping every 2-5 years

Do All Homes Have Septic Tanks?

Septic tanks are installed in around 20% of residences in the United States. A septic tank is most typically seen in rural locations when there is a big amount of property separating neighbors from one another. However, in south Florida, they may be found in practically every city, which is a welcome relief.

It is not possible to determine where to seek for them because there are no established restrictions, although they are generally located in lower-income regions where individuals do not want to spend the additional costs associated with having a public sewer system.

What Should Prospective Homeowners Know about Septic Tanks before Buying?

In the event that you’re considering purchasing a property that is equipped with a septic tank system, there are a few things you should know:

  • It is necessary to have a septic system examination performed before a title may be transferred. Remember that septic tanks can live up to 40 years or longer, so check the tank’s age before buying
  • It is possible that you may need to replace your system at some time during your homeownership, which can cost upwards of $7,000 for a traditional system. Alternatives may be more expensive. Investigate whether or not the septic tank system has ever failed or required repairs in the past. Septic tanks are frequently hidden behind concrete and are not properly maintained. Leaving a septic tank unattended for an extended period of time will result in irreversible damage to the drain field
  • In this instance, the only option is to dig up the entire yard (about 2000 SF depending on the number of bedrooms) and replace the tank. This is an extremely expensive project

Want to Learn More? Contact Our Team.

If you have any questions concerning septic tank systems, sewer systems, or any of the various methods through which your house handles wastewater, please don’t hesitate to contact our staff at Watermen Plumbing. For further information, please contact us online or by phone at (954) 800-6364 right now.

Florida Approved Septic Tanks Archives

225 Gallon Norwesco Low Profile Plastic Septic Pump Tank Non Plumbed 43551 48″L x 48″W x 50″H 225 GA, WA $579 SPECS DWG
300 Gallon Norwesco Low Profile Plastic Septic Pump Tank Non Plumbed 43552 51″L x 51″W x 52″H 300 GA $776 SPECS DWG
300 Gallon Norwesco Plastic Septic Pump Tank – Non Plumbed 41319 54″L x 54″W x 54″H 300 UT, CA, GA, MN, NY, OH, OK, WA $764 SPECS DWG
500 Gallon Norwesco Legacy Septic Tank – Single Compartment Non Plumbed – 1MH – GT 41320 101″L x 57″W x 47″H 500 UT, GA, MN, WA $1,107 SPECS DWG
1000 Gallon Norwesco Legacy Septic Tank – Double Compartment – 2MH – GT 44474 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,781 SPECS DWG
1000 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT 43517 127″L x 60″W x 51″H 1000 UT, GA, MN, NY, OH, OK, WA $1,893 SPECS DWG
1000 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH 41734 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $2,177 SPECS DWG
1000 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH 41735 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $2,300 SPECS DWG
1000 Gallon Norwesco Legacy Septic Tank – Single Compartment – 2MH – GT 44473 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,794 SPECS DWG
1000 Gallon Plastic Septic Tank – Single Compartment – Low Profile – 2MH – GT 42405 127″L x 60″W x 51″H 1000 UT, GA, MN, NY, OH $1,771 SPECS DWG
1000 Gallon NorwescoSeptic Tank – Single Compartment – 2MH 41718 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,850 SPECS DWG
1000 Gallon Norwesco Septic Tank – Double Compartment – 2MH 41720 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,973 SPECS DWG
1250 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT – SI/SO 43545 157″L x 60″W x 51″H 1250 GA $2,405 SPECS DWG
1250 Gallon Plastic Septic Tank – Single Compartment – Low Profile -2MH – GT – SI/SO 43544 157″L x 60″W x 51″H 1250 GA $2,254 SPECS DWG
1500 Gallon Norwesco Legacy Septic Tank – Double Compartment – 2MH – GT 44480 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,728 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH 41771 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $3,163 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH – GT 44470 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $3,128 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH – GT 44469 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,947 SPECS DWG
1500 Gallon Norwesco Septic Tank – Double Compartment – 2MH 41760 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,940 SPECS DWG
1500 Gallon Norwesco Legacy Septic Tank – Single Compartment – 2MH – GT 44479 135″L x 70″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,547 SPECS DWG
1500 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT – SI/SO (Side in and side out) 43547 157″L x 69″W x 51″H 1500 GA $2,850 SPECS DWG
1500 Gallon Plastic Septic Tank – Single Compartment – Low Profile – 2MH – GT – SI/SO 43546 157″L x 69″W x 51″H 1500 GA $2,668 SPECS DWG
1500 Gallon Norwesco Septic Tank – Single Compartment – 2MH 41758 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,755 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH 41772 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $3,349 SPECS DWG

Buying a Home With a Septic Tank? What You Need to Know

Published in February of this year A septic tank is one of those property features that might make prospective purchasers feel uneasy. A septic tank is a component of a home’s wastewater system that is often found in homes that are not served by municipal sewers. Instead, according to the Environmental Protection Agency, these stand-alone systems are meant to dispose of and treat the wastewater generated by a residence on their own (EPA). For anyone contemplating purchasing a property with a septic system, here are some often asked questions and answers to consider:

COUNT ON QUALITY COVERAGE.

Protect your assets and enjoy the peace of mind that comes with having Allstate insurance coverage. Request a quote Locate a representative.

How Does a Septic System Work?

A pipe gathers all of the wastewater from the residence and transports it to an underground septic tank that is completely waterproof. As explained by the Environmental Protection Agency, solids settle to the bottom of the pond while floatable items (known as “scum”) float to the top. Both are confined within the tank, which is emptied on a regular basis by a professional pumper. According to the Environmental Protection Agency, the middle layer includes liquid wastewater (also known as “effluent”) that exits the tank into a buried drainfield in the yard, where the wastewater disperses into the soil.

Is the Septic System Related to the Drinking Water System?

No. Many homes that have septic systems also have a private well to provide water. The septic system, on the other hand, is completely separate from the well. Rather of treating wastewater so that it may be consumed, its objective is to safely distribute it in a manner that prevents pollution.

What Differentiates One Septic System from Another?

According to the University of Nebraska-Lincoln, the size of the drainfield and the quality of the soil are the primary factors that distinguish one septic system from another. The drainfield must also be large enough to accommodate the volume of liquid generated by a family. To reduce the chance of clogging the system, the EPA recommends that dental floss, coffee grinds, kitty litter, paint, and chemicals not be disposed of in the toilet, sink, or disposal. On its Septic Systems page, the Environmental Protection Agency provides some extra dos and don’ts.

How Often Should You Get Your Septic Tank Emptied?

To remove the sludge and scum from the septic tank, it is necessary to hire a professional to pump it. The frequency is decided by the size of the tank and the degree of activity in the home (how much wastewater is generated).

According to the Environmental Protection Agency, most septic tanks should be emptied every three to five years. However, certain systems may require more frequent pumping – perhaps once a year if necessary.

What Are the Signs of a Failing Septic Tank?

Aside from routine pumping, the tank should be examined for leaks or obstructions on a regular basis. According to the Environmental Protection Agency, signs of a clogged system include foul odors that appear from time to time and fixtures that drain slowly or gurgle.

What About Maintenance Costs?

The size of the tank and drainfield, the accessibility of the tank, and the distance that waste must be taken for disposal all influence the cost of septic system upkeep. According to the Environmental Protection Agency, pumping a tank might cost between $250 and $500.

What Should I Do Before Buying a Home With a Septic System?

Learn about the laws in your state. Some states demand a septic system examination prior to transferring ownership. However, even if your state does not need an inspection, your lender may require one anyhow. As a rule, conventional house inspections do not involve an examination of the septic system. Zillow reports that an inspection may provide a detailed assessment of the system’s integrity, identify whether it is located at an appropriate distance from a well (to minimize contamination), and check the absence of invasive tree roots in the drainfield, which could cause damage to the system.

If you do need to replace your system, the cost might vary significantly.

Owning a property with a septic tank does not have to be a frightening experience.

Related Resources:

Leave a Comment

Your email address will not be published. Required fields are marked *