What Is The Weight Of A Septic Tank Pump Truck? (Best solution)

It scales at 14,990 pounds with tank and hoses.

• This is a very powerful pump, typically weighing 470 pounds, using 6-vanes, water cooled, and pumping sewage at 400 cubic feet per minute. It should be readily apparent that septage moving through the unit and into the pumper truck will be highly agitated and mixed in the truck.

How much does a septic pumping truck weigh?

With a 1,900-gallon tank, a septic truck will weigh in at around 28,000 pounds when completely filled. It is important to know what the exact specifications are for the septic truck you purchase. Generally, you will find most tanks on a septic truck range between a 1,500 to 2,500-gallon capacity.

How big are septic pump trucks?

Septic Trucks Tank sizes range from 300 gallons, and as large as 5500 gallons.

How big is a sewage truck?

Commercial vacuum trucks which collect fecal sludge usually have a volume of 10–55 cubic metres (350–1,940 cu ft). However various smaller versions for specialized applications or low-resource settings can be found with tanks as small as 500 litres (110 imp gal; 130 US gal).

How far can septic pump truck reach?

Many septic pumper trucks carry a shorter length but certainly there are septic pumping companies offering pumping services advertising that they can reach up to 200 feet from the truck.

How far can a septic tank truck pump?

Usually the pump truck sits out in the driveway or street and a hose is used to vacuum out the septic tank. Most trucks, however, cannot pump more than 100 feet under normal flat conditions.

What are poop trucks called?

A honeywagon is the slang term for a “vacuum truck” for collecting and carrying human excreta. These vehicles may be used to empty the sewage tanks of buildings, aircraft lavatories, passenger train toilets and at campgrounds and marinas as well as portable toilets.

How wide is a vacuum truck?

At 8 feet, 6 inches wide and 35 feet in overall length, the trailer mounted unit was considerably larger than the vehicle-mounted units, and had a gross weight of 90,378.50 lb. It was made from the same steel alloys as the two aforementioned units but had a thinner shell plating at only 0.25 inches thick.

How tall is a septic truck?

They are equipped with 250′ of 2″ hose and are 6’4″ in height, allowing them to be used in low-entry facilities. Our 1200-gallon vacuum pump truck is used for cleaning and maintaining grease traps and pump chambers in tight areas.

How much does a fully loaded tanker truck weigh?

Tanker truck Because they are used to transport fluids and gases, mostly flammable, they are considered dangerous in case of an accident or collision. Some of these heavy-duty trucks have a gross weight of over 26,000 pounds and transport about 5,500 gallons to 9,000 gallons of liquid and gas.

How much do water trucks weigh?

A tandem axle truck is 17,000 pounds to 23,000 pounds + or –. Depends on the specs of the truck. Using these numbers can get you an approximate weight.

What are Vactor trucks?

A vacuum truck or vacuum tanker is a tank truck that has a pump and a tank connected to a vacuum system. The pump is designed to pneumatically suck liquids, sludges, solids, or the like from a location (often underground) into the tank of the truck.

What do vacuum trucks do in oilfield?

Oilfield Operations Industrial vacuum trucks are used to dispose of water produced from hydraulic fracturing operation that occur in the oilfield. Vacuum trucks used in the oilfields are designed to decrease downtime and increase revenue.

How does a vacuum truck work?

A vacuum truck works similarly to a shop vac. A powerful pump removes air from the holding tank, which creates a vacuum inside. Opening the primary and secondary shutoff valves on suction hoses forces the tank to try to equalize the pressure inside, letting the truck suck up liquids and sludges.

What is a hydrovac truck?

Hydrovac trucks are a class of industrial vacuum trucks used primarily for digging and excavation purposes.

Watch the Load, Keep Trucks On the Road

Get the latest industrial articles, news, and videos delivered directly to your email! Now is the time to sign up. Industrial+ Receive Notifications It is the goal of this section in Pumper to highlight notable discussions that take place on the Pumper Discussion Community, an online forum for industry experts that can be accessed at. A forum for the sharing of knowledge and ideas on septic and drainfield installation and maintenance, trucks and equipment, portable sanitation, chemicals and additives, and a wide range of other topics is available on Pumper Discussion.

Readers should, however, do in-depth research with reputable industry sources before implementing such recommendations in a given company circumstance.

Question:

I notice a number of vehicles with 2,000-gallon fuel tanks that have GVWRs under 26,000 pounds. I’m fascinated to know how much these trucks weigh when they’re fully loaded. Is there anyone who has been stopped and fined? I have a 1997 GMC C6500 pickup truck that weighs 14,640 pounds when empty. It has a 1,900-gallon tank, and when fully loaded, it weighs around 28,000 pounds (not including the driver). I had a peek at several of the weigh slips at the wastewater facility, and they all have an empty weight of 17,000 pounds.

I purchased it since it is equipped with air brakes.

However, if it weighs 17,000 to 18,000 pounds empty and I add a 2,000-gallon tank, I believe it will weigh around 30,000 pounds when fully filled.

ANSWERS:

It all depends on the type of tank you’re putting in. I am aware that those GMCs are really hefty; I used to own one and it was constantly overweight. And there are a number of folks out there that manufacture vehicles that aren’t built to the proper wheelbase and weight specifications. Add the weight of the tank to the 8.5 pounds per gallon of septage to get the total weight. That is how they determine the weight of the tank when it is fully loaded. ◆◆◆ My current vacuum truck is a GMC C6500 with a gross vehicle weight rating of 25,995 pounds.

1. That provides me around 11,000 pounds more until I surpass the legal load limit and no longer qualify for a commercial driver’s license.
2. Most trucks under 26,000 pounds are equipped with hydraulic brakes, which are not particularly effective when the vehicle is fully loaded.
3. Everything on it weighs more than the GMC truck.
4. I really don’t want to go in all that effort to put a 2,000-gallon tank on it just to discover that it weighs 20,000 pounds when it’s empty.
5. I own and operate what I refer to as “cheater trucks.” They are 33,000-pound gross vehicle weight rating trucks that have been derated to 26,000-pound gross vehicle weight rating at the manufacture.
6. I have two aluminum 2,800-gallon tanks, which would weigh more than 30,000 pounds if they were fully stocked with all of their contents.
7. The most significant advantage is that insurance is far less expensive.
8. Almost all of the pumpers in my region have switched to smaller trucks with a gross vehicle weight rating of less than 26,000 pounds.

You claim to have a tank with a capacity of 2,800 gallons. Do you ever run with all of your limbs on the line? There have been numerous folks who have advised me that I should simply go ahead and get an aluminum tank. That is not a feasible option for me.

How To Spec Out a Septic Pumper Truck

When it comes to specing a pump truck, what do you look for?

Interested in Pumps?

Get the latest Pumps articles, news, and videos delivered directly to your email! Now is the time to sign up. Pumps+ Receive Notifications If you’re in the market for a new pumper truck, Jay Minear has some words of wisdom for you: More is undoubtedly better in terms of things like tank capacity, horsepower, and a more powerful vacuum pump, among other things. Why? The technology enables pumpers to complete jobs in less time, resulting in higher profits; it reduces wear and tear on components; and it allows them to perform a wider range of tasks, which helps them diversify their business base, according to Minear, a sales representative for Keith Huber Corp.

1. Despite the fact that it seems like a salesperson is speaking, Minear believes that more power and capacity is preferable in general.
2. Another option is to spend between $150,00 and $200,000 for an adequately equipped truck that includes, for example, a 3,300-gallon tank, a 300-gallon water tank, a 35 gpm/2,000 psi water pump, and a 440-cfm vacuum pump.
3. Every day, I get questions from people asking me what they can accomplish with a well-equipped vacuum truck, and my response is always the same: “Use your creativity.” The right specification of a truck is dependent on a large number of criteria.
4. However, even with all of this in mind, there are still fundamental considerations to keep in mind, as Minear argues.

Fill ‘er up

According to Minear, purchasing a bigger tank is recommended, with a minimum of 3,000 to 3,300 gallons. Why? For starters, there is a general tendency toward larger aerobic tanks, which in turn necessitates the demand for larger aerobic tanks. In addition, larger tanks reduce the number of disposal trips necessary, resulting in fuel and time savings, increased productivity, and reduced vehicle wear and tear, among other benefits. In order to save money when traveling long distances, Minear recommends getting a tank with as much capacity as feasible.

Steel’s the deal

Even while both carbon steel and aluminum tanks have their merits, Minear says he favours steel because it is less susceptible to corrosion and can withstand more stress and strain when compared to aluminum. Some drivers choose aluminum because it is lighter than steel, which allows them to purchase a larger fuel tank while still adhering to weight regulations on the road. However, Minear points out that by simply specifying a tri-axle arrangement — or even a quad-axle configuration — a pumper may handle a larger tank while still meeting weight requirements since the additional axles spread the weight more equally.

Nevertheless, he believes that it is a modest price to pay for an exorbitant overage charge.

“I favor ASME/DOT-code tanks for one simple reason: they have a high resale value,” Minear explains. “It’s a no-brainer.” There are no restrictions on what a buyer may haul with a code tank, and you can make more money by supplying a variety of markets, which makes it simpler to sell.

Jetter is better

An additional water jetter, a 300-gallon water tank, and a water pump (capable of pumping 35 grams per minute at 2,000 pounds per square inch) may be added to a setup for around $20,000. Alternatively, you may pay between $13,000 and $14,000 on a less powerful pump (10 gpm at 2,000 psi). Regardless of how it’s done, Minear believes it’s an investment that will rapidly pay for itself, both in terms of improved customer service and the addition of a new source of income for jetting services. It’s possible to clear them out with a nozzle on the end of a hose if the homeowner reports that the line is flowing slowly, or if you’re cleaning a grease trap and the restaurant owner reports that a trunk line is running slowly, according to Minear’s explanation.

“Additionally, if you’re cleaning a septic tank that hasn’t been pumped in 40 years, you may use the jetter to practically chop solid dirt off the tank’s walls.” The difference between accomplishing something in half an hour and standing there for four hours is often significant.”

Rev it up

A 350 horsepower diesel engine is recommended by Minear; however, he prefers a 425 horsepower engine, which costs around $8,000 to $10,000 more than the lesser engine. However, a more powerful engine is better at dealing with a heavier load and puts less strain on the chassis and tank. He points out that the difference in gas mileage between a 350 horsepower engine and a 425 horsepower engine is small, so it isn’t a consideration. When you have a larger engine, you don’t have to wind it up or use all of its power to get it to function, argues the author.

Shift work

Miner believes in the KISS concept, which stands for Keep It Simple, Stupid, when it comes to transmissions. In other words, opt for an eight- or ten-speed manual gearbox rather than an automatic transmission to save money. According to Minear, the price difference between a manual and an automatic transmission is around $10,000 to $13,000. Despite the fact that many men are spending a lot of money on automatic transmissions because they can’t find drivers who can drive a stick shift, Minear believes that manual transmissions are far more user-friendly these days.

” “As long as you have enough horsepower up front, the transmission will take care of the rest.”

Pump it up

Although both water-cooled and air-cooled pumps are capable of serving pumpers effectively, Minear prefers liquid-cooled pumps, which he claims can operate for up to 12 hours straight without experiencing any issues in the process.

Open-door policy

Minear also proposes investing in two more options: a hydraulic tilt tank and a full-open back door. He estimates that this addition will cost between $7,000 and $15,000, but that it will pay for itself by significantly decreasing dumping and tank cleaning time. As he points out, when cleaning a tank that hasn’t been pumped in 40 years, you’ll be dealing with a lot of thick, gooey material that’ll be a pain to off-load if you don’t have access to a full-lift tank. It will take all of your might to get the tank rinsed out using a garden hose or whatever else is at your disposal.

We’ve got you covered.Check out this gold mine of vacuum pumps, tanks, components and basically anything you need to spec out your ultimate septic truck.

• Heated collars from L. T.E. protect valves from freezing. Collars are offered in three different sizes: three inches, four inches, and six inches. It is possible to vibrate sticky loads and move material out fast and cleanly with the DV12KVL Dump Box Vibrator from Del Hydraulics. Doran Manufacturing’s 360 tire pressure monitoring systems, which provide drivers with real-time tire pressure information as well as essential low-pressure warnings, assist fleets to save tire replacement and maintenance expenses. Designed by Jurop/Chandler, the RV360 rotary vane vacuum pump has a very silent operation and is equipped with efficient dual-fan cooling technology. Fast-Earth Vac’s Shuttle truck-mounted wet/dry vacuum loader can fit a roll-off truck that does not require a specific chassis, resulting in a lower total cost of ownership
• And Preassembled vacuum pump packages from Moro USA are available for all W-Series vacuum pumps, including air-, fan-, and liquid-cooled models, and are available in both traditional perch-mount and close-coupled configurations. Designed for continuous full vacuum operation in harsh environments, the PV750 rotary vane pump from Presvac Systems is a reliable choice. The Bolt and Go high-vacuum blower system from Surpresseur 4S Inc. includes a variety of Robuschi RB-DV 28-inch Hg high-vacuum blowers with capacities ranging from 500 to 2,600 cfm. The Patriot 300, a continuous-duty vacuum pump by VARCo that is ballast-port cooled, can produce more than 300 cfm of vacuum. Incorporated into the 753 Series vacuum pump from Wallenstein Vacuum Pumps are extra-wide vanes that allow for up to an inch of wear, which results in a longer service life and cheaper maintenance costs. Installing Conde Powerpak preassembled, gasoline- or diesel-powered vacuum pump units from Westmoor Ltd. is as simple as bolting them down and connecting them to the tank. The Cat Pumps type 6810 triplex plunger pump, with a flow rate of 10 gpm and a pressure of 10,000 psi at 600 rpm, is designed for high-pressure applications. Using Green Leaf’s GatorLock Couplings, you may quickly connect and disconnect items such as tanks, pump motors, transfer lines, and other similar items. This heavy-duty polyurethane-lined wet or dry material handling hose from Kuriyama of America has excellent abrasion resistance and is constructed with a polyurethane liner that is designed to withstand internal wear, particularly in hose bends. The 4,000-gallon aluminum Matador septic/grease vacuum tank from Amthor International is equipped with a 5/16-inch-thick side shell and bottom, as well as complete head baffles and no exterior rings as standard features. It is a low-profile flat vacuum tank from Crescent Tank Manufacturing that has the adaptability to transport numerous portable bathrooms at the same time, as well as hand-wash stations, extra water tanks, and other equipment
• It is also available in different sizes. Vacuum service tanks by Glendale Industries are composed of a strong carbon steel shell with welded seams on the interior and outside, as well as a powder-coated surface to prevent corrosion. Vacuum tanks made of hot-dip galvanized steel from LMT – VAXTEEL help to prevent steel corrosion in hostile conditions. Middle State Tank Company’s 400-gallon aluminum vacuum tank is equipped with 20-inch top and rear manways, a primary manway, three 5-inch sight eyes, and other features. Full rear-open hoist and door made of ASME 407/412 carbon steel are offered from Progress Tank in carbon steel, stainless steel, and aluminum, and they are available in ASME, non-code, DOT, and TC configurations. The polished aluminum shell of the 2,500-gallon septic/grease vacuum tank from Robinson Vacuum Tanks, as well as complete flanged and dished anti-surge baffles, are included as standard features
• Additional features include: When the Ecolo-filter ACF from TEAMCO is used to filter the entire septic tank, it effectively separates liquids from solids. In order to assess the liquid level or volume in transportable tanks, the Titan Logix Corporation TD80 liquid level gauging system employs guided wave radar technology. Water Cannon’s industrial-grade skid-mounted pressure washers are equipped with Gates poly-chain cogged belts that are rated for 10,000 hours of use, an easy-start function, an adjustable pressure unloader, and an engine oil drain. A truck hydraulic system is not complete without the presence of a Thermaflow mobile hydraulic cooler from STAC Inc. The Cougar line of vibrators from Martin Engineering is designed to improve the off-loading of industrial waste from vacuum loaders, hydroexcavators, and sewer cleaners. The Hydra-Tech Pumps S6TDI 6-inch vortex impeller submersible trash pump features a completely recessed stainless steel impeller and is capable of pumping heavy solids, stringy materials, and slurries including entrained gases. In restricted or heavily crowded work environments, Multi-Frequency Alarms (MFA) from ECCO Safety Group are used because their sound fades more quickly than pure tone alarms, making them an excellent choice. The Logan Clutch Corporation’s two-disc pneumatic clutch produces a substantial amount of torque, requires no modification, and can be triggered by pressing a button in the heated cab anytime it is required.

Septic Pumper Truck Operating Procedures: Septic Tank Pumping Procedure

• Valve collars from L. T. E. protect valves from freezing throughout the winter. Collars are available in three different sizes, all of which are made of 304 stainless steel. A dump box vibrator by Del Hydraulics, the DV12KVL, is designed to transfer sticky loads swiftly and neatly out of a dump box. By providing drivers with real-time tire pressure information and vital low-pressure warnings, Doran Manufacturing’s 360 tire pressure monitoring systems assist fleets to save tire repair and maintenance costs while increasing fleet safety. Designed by Jurop/Chandler, the RV360 rotary vane vacuum pump is very energy efficient, has dual-fan cooling technology, and operates quietly. Fast-Earth Vac’s Shuttle truck-mounted wet/dry vacuum loader can fit a roll-off truck that does not require a specific chassis, resulting in a lower total cost of ownership. For all air-, fan-, and liquid-cooled W-Series vacuum pumps, preassembled vacuum pump packages from Moro USA are available in the usual perch-mount and close-coupled orientations
• They are also available in a variety of sizes. Designed for continuous full vacuum operation in harsh environments, the PV750 rotary vane pump from Presvac Systems is the best choice. Robuschi RB-DV 28-inch Hg high-vacuum blowers with capacities ranging from 500 to 2,600 cfm are included in the Bolt and Go from Surpresseur 4S Inc. There is more than 300 cfm of vacuum produced by the VARCo Patriot 300, which is ballast-port-cooled and continuous-duty. Incorporated into the 753 Series vacuum pump from Wallenstein Vacuum Pumps are extra-wide vanes that allow for up to an inch of wear. This results in a longer service life and cheaper maintenance expenses. Preassembled, gasoline- or diesel-powered vacuum pump units from Westmoor Ltd. are installed by simply fastening them to the tank and attaching them to the vacuum pump unit. In addition to a flow rate of ten gallons per minute and pressures up to 10,000 pounds per square inch at 600 revolutions per minute, the Cat Pumps model 6810 triplex plunger pump delivers a pressure of up to ten thousand pounds per square inch. Using Green Leaf’s GatorLock Couplings, you may quickly connect and disconnect items such as tanks, pumping systems, transfer lines, and other similar items. This heavy-duty polyurethane-lined wet or dry material handling hose from Kuriyama of America has excellent abrasion resistance and is constructed with a polyurethane liner that is designed to withstand internal wear, particularly in hose bends
• Amthor International’s 4,000-gallon aluminum Matador septic/grease vacuum tank is equipped with a 5/16-inch-thick side shell and floor, complete head baffles, and no exterior rings as standard. All-In-One Rectangular Vacuum Tank by Crescent Tank Manufacturing is a low-profile flat vacuum tank that has the adaptability to transport numerous portable bathrooms at the same time, hand-washing stations, supplementary water tanks, and other equipment. Vacuum service tanks by Glendale Industries are composed of a strong carbon steel shell with welded seams on the interior and outside, as well as a powder-coated finish to protect against corrosion. Steel corrosion is combated by LMT – VAXTEEL’s hot-dip galvanized vacuum tanks under demanding conditions. Middle State Tank Company’s 400-gallon aluminum vacuum tank is equipped with 20-inch top and rear manways, a main, three 5-inch sight eyes, and other features. Full rear-open hoist and door made of ASME 407/412 carbon steel are offered from Progress Tank in carbon steel, stainless steel, and aluminum, and they are available in ASME, non-code, DOT, and TC configurations as well. In addition to a polished aluminum shell, complete flanged and dished anti-surge baffles, and more, the 2,500-gallon septic/grease vacuum tank from Robinson Vacuum Tanks includes: In order to separate liquids from particles, the Ecolo-filter ACF from TEAMCO filters the whole septic tank at the same time
• In order to assess the liquid level or volume in transportable tanks, the Titan Logix Corporation TD80 liquid level gauging system employs guided wave radar. Pressure washers from Water Cannon are designed for industrial use and features 10,000-hour rated Gates poly-chain cogged belts, as well as an easy-start function, an adjustable pressure unloader, and a drain for the engine’s oil. A truck hydraulic system would not be complete without a Thermaflow mobile hydraulic cooler from STAC Inc. The Cougar family of vibrators from Martin Engineering enhances the off-loading of industrial trash from vacuum loaders, hydroexcavators, and sewer cleaners. Hydro-Tech Pumps’ 6-inch vortex impeller submersible trash pump, the S6TDI, features a completely recessed stainless steel impeller and is capable of pumping through big particles, stringy materials, and slurries containing trapped gases. In tight or heavily crowded work environments, Multi-Frequency Alarms (MFA) from ECCO Safety Group are used since their sound fades more quickly than pure tone alarms. The Logan Clutch Corporation’s two-disc pneumatic clutch produces a substantial amount of torque, requires no modification, and can be triggered by pressing a button in the heated cab anytime it is required

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. The septic pumper truck is operated as follows: This paper covers the stages involved in the operation of a septic pumper truck during septic tank cleaning and maintenance. In this section, we describe how the septic pumper truck operator should open the septic tank, place the vacuum lines, check the septic truck vacuum pump for proper operation before beginning the pumpout, the normal vacuum levels in the system during septic tank pumping, listen for jamming of the septic vacuum pump during pumping, connect the vacuum hoses to the pumper truck, and start the septic tank vacuuming procedure.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

Septic Tank Pumper Truck Operation Procedures

Pneumatic septic pumping trucks are special-purpose vehicles that are equipped with a strong vacuum pump as well as a holding tank to collect sewage and wastewater. Activation of the vacuum pump is confirmed, and the pump is linked to a vacuum line of at least 4″ in diameter. The vacuum line is utilized by the operator to empty the septic tank. Common septic pumper truck vacuum pump brands include BattioniPagani vacuum pumps, Conde vacuum pumps, Hertell vacuum pumps, Masport vacuum pumps, Moro vacuum pumps, NVE (National Vacuum Equipment) pumps, PB vacuum pumps, Juro vacuum pumps.

The Masport HXL400 System – a 400 CFM water-cooled vacuum pump – is an example of the sort of vacuum pump that is commonly found on septic tank repair vehicles.

This is an extremely strong pump, normally weighing 470 pounds, with six vanes and is water cooled, capable of pumping sewage at a rate of 400 cubic feet per minute and weighs 470 pounds.

It should be obvious that septage going through the unit and into the pumper truck will be extremely agitated and mixed as it reaches the vehicle. This agitating effect will be there regardless of which pump is utilized in this application.

A Photographic Step by Step Guide to Pumping or Cleaning a Septic Tank

In order to properly place the septic tank pumping lines or execute any other tasks with the septic pumping truck, the operator must first find the septic tank and remove the cover from its enclosure (discussed above.) Immediately after opening the septic tank, an initial step is taken to begin breaking up the septic tank’s floating scum layer and settled sludge layer. This activity is depicted in the photo here. The septic pumper operator is in charge of laying out the pumping vacuum lines that will transport waste from the tank to the septic tank.

• The vacuum pump assembly on the septic pumper truck is seen in these images.
• The vacuum pump must be turned on before the pumper hose can be connected to the truck’s transfer tank, as part of the preparation process.
• While driving, the operator pays attention to the truck’s vacuum pump motor to ensure that it is running properly.
• Having verified that the vacuum pump is running properly, we can proceed to remove the pumper truck’s tank valve cover as well as connect the vacuum line to the pumper truck.
• The operator is shown in the second shot to the right, hooking the first length of septic tank pumping hose to the tank truck in the third photo to the right.
• The first piece of the vacuum line has already been connected to the pumper truck.
• Those who are suggested to guard against the dangers of sewage pollutant splash-back are those who are not.

Where to Buy Septic Pumper Trucks, Vacuum Pumping Trucks, other Septic System ServiceInstallation EquipmentSupplies

• A new vacuum service vehicle for servicing septic systems or portable toilets is being manufactured by KeevAC, which is headed by Kevin Keegan and can be reached at 866-789-9440. In addition, vacuum pumps, hoses, and other sanitation accessories are available from the firm. American vacuum manufacturer National Vacuum Equipment is located at 2707 Aero-Park Dr. in Traverse City, Michigan 49686. Their phone number is 800-253-5500, and their email address is [email protected]. National Vacuum Equipment is a vacuum equipment company based in the United States. NVE Challenger pumps and Battioni Pagani rotary vane pumps are among the products that the company distributes. The company also manufactures vacuum blowers and high-capacity vacuum pumps as well as air assist vacuum pumping systems and valves for vacuum systems, as well as custom-fabricated vacuum products. This organization provided assistance with our story. PUMPER TRUCK VACUUM PUMPS
• The Sanitation Journal is an industry journal that features portable restrooms and septic pumper trucks for sale in its classified ads section. There is a list and description of vacuum trucks as well as portable toilet/restroom service vehicles. The SewerShopper.com website lists septic pumper trucks for sale under the category “Vacuum Equipment Septic,” as well as vacuum excavators, jetters, and portable toilet service equipment
• Wastequip provides vacuum trucks and vacuum equipment, as well as hydro trenchers and portable toilet trucks
• And SewerShopper.com provides septic pumper trucks for sale under the category “Vacuum Equipment Septic.” See if any other septic service firms in your area have equipment for sale by calling their phone numbers listed in your local phone book.

Reader CommentsQ A

Chris In the absence of more information The driver of the septic tank pumper truck is doing something on his lawn, and I have no idea what it is. It’s possible that he’s merely warming up the truck engine. Of course, if you saw pumper lines from his vehicle attached to anything, such as a public sewer, that would be a cause for worry as well. Septic tank trucks are driven by the gentleman across the street. Every day, he parks his truck in his driveway and starts it. What exactly is he doing?

Herman Thank you for your insightful inquiry.

As a result, the pumping operation is only capable of completing the “easy” part of the job and is likely to leave a significant volume of solids in the tank – which is unfortunate because it is precisely the removal of these solids – the floating scum and settled sludge solids – that is the primary goal of pumping out a septic tank in the first place.

1. 4” Purchase Orders and the Policy Governing Them We’re sorry, but we are unable to deliver the product or service that you requested.
2. There are no items and no services.
3. In order to provide our readers with the full assurance that we write and report without bias, we do not sell any products and do not have any commercial or financial connections that may result in such conflicts of interest in the future.
4. Please provide me with an estimate on how much it would cost to install a Vactor EXB-198 pumper hose on my Universal H-12 vactor truck, if at all possible.
5. If you wanted to remove waste oil, you would surely not utilize a septic pumper truck.
6. Furthermore, you would not want to combine waste oil with septage or sewage waste.
7. Is it possible to utilize a pump truck to collect waste oil from restaurants?
8. Additionally, the licensing requirements to own and operate a septic pumper truck and a septic tank cleaning firm differ from municipality to municipality, but in general an operating permit granted by the local department of health or comparable body is necessary.
9. SEPTIC TANK PUMPERS AND CHEMICAL TOILET OPERATORS MUST COMPLY WITH SPECIFICATIONS Environmental Health Division of SContra Costa Health Services is located at 2120 Diamond Blvd., Suite 200, Concord, CA 94520 and can be reached at (925) 692-2500.

obtained on 2019/1-0/15 from website source at the time of publication: Where do all of these cleaning trucks go to get refilled? In order to drive a pumper truck, what type of license do I require? Any medium-sized vacuum truck would be quite beneficial.

Question:

(February 13th, 2014) Anonymous said: Dear Sir, we need to get in touch with you since we are interested in purchasing some of your products. Here is our phone number.

Reply:

As an anonymous observer pointed out, InspectApedia does not sell any products or services in order to maintain the confidence of our readers. Check the CitationsReferences section at the end of each article, including this one, and you will discover references to companies and sources that can aid you in your endeavors. If you want to see the specifics, you’ll need to click on the “Click to Show or Hide CitationsReferences” button. Please do not write us an email or contact us in an effort to make a transaction.

Question: costs involved in septic pumping or pumping equipment

(February 2, 2014) Anonymous asked: What is the cost of this service?

Reply:

Anon I’m not sure what you’re asking for: the cost of a septic tank pump ($100 to $200) (which fluctuates considerably depending on location and municipal regulations on sewage disposal), or the cost of a septic pumper truck ($50,000 and above, used).

Question: how far can the tank be from the pumper truck

Anon Depending on where you live and the regulations in your area regarding sewage disposal, I’m not sure what you’re asking for: the cost of a septic tank pumper truck ($50,000 to $200,000, old) or the cost of a septic tank pumper truck ($100 to $200, new).

Reply:

Anon I’m not sure what you’re asking for: the cost of a septic tank pump ($100 to $200) (which fluctuates considerably depending on location and municipal regulations on sewage disposal), or the cost of a septic pumper truck ($50,000 to $150,000, used).

Septic Pumping ProcedurePumper Truck Operation Articles

• Anon I’m not sure what you’re asking for: the cost of a septic tank pump ($100 to $200) (which fluctuates more depending on location and municipal regulations on sewage disposal), or the cost of a septic pumper truck ($50,000 and above, secondhand)

• HOW TO CLEAN A SEPTIC TANK
• WHEN TO CLEAN A SEPTIC TANK
• WHEN NOT TO PUMP A SEPTIC TANK
• HOW TO FIND A SEPTIC TANK
• HOW TO OPEN A SEPTIC TANK
• HOW TO INSPECT A SEPTIC TANK BEFORE PUMPING
• SEPTIC TANK INSPECTION PROCEDURE
• SEPTIC TANK LEVELS OF SEWAGE
• PUMPER

• CLEANING SEPTIC TANKS
• WHEN TO CLEAN THE SEPTIC TANK
• WHEN NOT TO PUMP A SEPTIC TANK
• HOW TO FIND THE SEPTIC TANK
• HOW TO OPEN A SEPTIC TANK
• INSPECT THE SEPTIC TANK BEFORE PUMPING
• SEPTIC TANK INSPECTION PROCEDURE
• SEPTIC TANK LEVELS OF SEWAGE
• PUMPER TRUCK O

Suggested citation for this web page

PROCEDURE FOR OPERATION OF A PUMPER TRUCKatInspect An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Apedia.com. Alternatively, have a look at this.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Please use the search box just below, or, if you prefer, you may make a question or remark in theCommentsbox below and we will react as soon as we can. Thanks for visiting! InspectApedia is a website that allows you to search for information. Please keep in mind that the publication of your Comment below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your posting will appear when it has been reviewed by a moderator. Excuse the delay in getting back to you!

Vacuum Trucks & Septic Tank Trucks for Industrial and Municipal Use

Having served industry experts all over the world for more than 40 years with high-quality custom-designed vacuum system equipment and accessories, Transway Systems is tremendously delighted with its continued success.

We may be reached at 1-800-263-4508 for all of your septic tank truck as well as industrial or municipal vehicle requirements. For further in-depth information, please visit one of the links provided below:

Vac Truck	Our ongoing relationship with municipal and industrial customers over many years means that we have constant valuable feedback about the specifications that get the job done.We will work with your requirements to custom fit your vac truck with any and all brands of vacuum pumps and positive displacement blowers and the options you need for the most functional truck for your application.
vacuum truck	Transway is your one-stop shop for all of your vacuum tank truck requirements, including replacement parts such as hoses, valves and shut-offs.
Tank Truck	“The bitter taste of poor quality lingers long after the sweet taste of low price is forgotten.”At Transway, we work within the framework of each customer’s needs to deliver the finest vehicle possible because all of our equipment is custom built.We look forward to designing and building your next tank truck.
septic tank pump trucks	Whether your pump truck is servicing portable toilets or household septic tanks, your company and your drivers require a unique mix of options and features.Let Transway help you weigh the costs and benefits of each to find the right combination for your septic tank pump vehicles.
Hydro Excavation Equipment	Our commitment is to listen and work with you to build the finest hydro excavators.
Hydrovac Trucks for Sale	One of our most popular models is our hydro excavator with a 3000 gallon debris tank and a 1200 gallon water tank that handles 10 GPM at 6000 PSI – a true all season machine with a walk-in heated enclosure, wireless remote and a backup camera.
Hydro Vac Trucks	Transway is large enough to handle any job, yet small enough to oversee the most detailed customer service requirements, with prompt after the sale service and support.
Industrial Vacuum Truck	For a custom designed and quality manufactured industrial vehicle, count on Transway Systems’ more than 40 years of experience.
septic pump trucks	Whether your need is for a large capacity tank truck to pump and transport up to 5500 gallons, or for a small tank to move only 300 gallons at a time, Transway commits to listening to you and working with you to design and build the right equipment for the job.
septic tank trucks	No matter what your septic business needs, Transway Systems can custom build your septic tank truck to meet or exceed them.
septic trucks	For heavy duty septic trucks that work, call Transway to custom build to meet your needs.

Vacuum truck – Wikipedia

A vacuum truck, also known as a vacuum tanker, is a tank vehicle equipped with a pump and a tank. An underground site (typically with the pump installed) is used to pneumatically suction liquid, sludge or slurries into the tank of a vehicle using a pneumatic sucking system. The goal is to make it possible for liquid material to be transported by road to a different destination. Vehicles equipped with vacuum trucks take the collected waste to a treatment or disposal facility, such as a sewage treatment plant or a landfill.

Besides that, they convey waste water, industrial liquids, and slurries from animal feces from pens at livestock operations.

Before installation can commence, these vehicles may utilize compressed air or water to carefully break up the ground without causing damage to the surrounding environment.

Other names used

Tatton Parkflower display in July 2009, England, when a vacuum tanker was used to collect effluent. a fleet of vacuum trucks employed by Manila Water for desludging services in the capital city of the Philippines Several other names for vacuum trucks include “vacuum tankers,” “sucker trucks” (in Australia) or “sewer suckers,” “hydro-vacs” or “vac-trucks” (in Canada), and “exhauster trucks” (in the United States) (in Rwanda, Malawi). Honey bucket is the source of slang phrases such as “honey truck,” “honey sucker” (in India and South Africa), and “honeywagon,” which are all (possibly) derived from the term “honey bucket.” Vacuum trucks are sometimes referred to as “sludge trucks” when they are used to transport excrement from one location to another.

Design and configurations

In July 2009, during the Tatton Parkflower show in England, a vacuum tanker was utilized to collect waste. Cleaning trucks utilized by Manila Water for desludging services are seen in the Philippines capital of Manila. Several other names for vacuum trucks include “vacuum tankers,” “sucker trucks” (in Australia) or “sewer suckers,” “hydro-vacs” or “vac-trucks” (in Canada), and “exhauster trucks” (in the United Kingdom) (in Rwanda, Malawi). Honey truck, honey sucker (in India and South Africa), and honeywagon are all slang terms that are (probably) derived from the term “honey bucket.” Vacuum trucks are sometimes referred to as “sludge trucks” when they are used to move excrement from one location to another.

Pumps

They often employ a low-volumesliding vane pump or a liquid ring pump in order to generate negative air pressure in the system. However, the usage of diaphragm mud pumps is less widespread, despite the fact that they have the benefit of being easier to construct and typically having lower total costs. Mechanical parts come into touch with sludge, which is not the case with the more popular vacuum pumps, which is a drawback. The truck may be customized to have either a direct belt drive or a hydraulic drive system installed.

The second alternative, which uses an independent motor, is more difficult and is not often employed in the field of robotics.

Pumping sludge across longer distances or lifting it higher into a tank is also possible using both the negative pressure suctionside and the positive pressure suctionside of the pump, depending on the application.

Suction hoses

They often employ a low-volumesliding vane pump or a liquid ring pump in order to generate negative air pressure in their system. Though less prevalent than piston pumps, diaphragm mud pumps have several advantages over piston pumps, including a simpler design and, on average, reduced total costs. The downside is that mechanical parts come into touch with the sludge, which is not the case with the more typical vacuum pumps used today. Direct belt drive or hydraulic drive systems are also options for the truck configuration.

The second method, which uses an independent motor, is more difficult and is not often employed in the field of aviation.

Pumping sludge across greater distances or lifting it higher into a tank is also possible using both the negative pressure suctionside and the positive pressure suctionside of the pump.

Emptying the tanker

Normally, a tanker is emptied by the use of gravity. It is possible to pressurize the vacuum tank in order to “pressure out” the liquid as quickly as feasible (or against a small difference in elevation). Because this process is harmful to the equipment, it should only be utilized in extreme circumstances. Regular discharge time for a tanker of 8–9 cubic metres (280–320 cu ft) is around 15 minutes (or 7–10 minutes to unload a tanker of 4,000 litres (880 imp gal; 1,100 US gal) is approximately 15 minutes).

According to the thickness of the sludge, size of the outlet valve and hose, amount of garbage present in the fecal sludge, and frequency of driver cleaning the dump screen, discharge time can take anywhere from a few minutes to several hours.

Uses

In many parts of the world, vacuum trucks are utilized by town and municipal administrations, as well as by commercial establishments.

Human excreta

Vacuum trucks provide service to a number of different sorts of non-centralized sanitation systems. Their applications include the removal of sewage from cesspits, septic tanks, pit latrines, and community latrines, the cleaning of streets and sewers, and the maintenance of individual septic systems. They are employed in the cleaning of sanitary sewer pumping stations, among other things. Portable toilets are emptied with the help of vacuum trucks. To collect garbage from airplane bathrooms, vacuum trucks are utilized in commercial aviation to collect waste.

Vacuum trucks transport these pollutants to the sewage system, a wastewater treatment facility, or straight into the environment.

Known as “institutionalised open defecation,” this behavior is hazardous to human health and the environment since it poses a threat to both public health and the ecosystem.

Industrial liquids

A vacuum truck is a piece of equipment that is used in the petroleum sector to clean storage tanks and spills. In addition, because they are placed at the drilling site, they are a crucial element of the process of drilling oil and natural gas wells. Vacuum trucks are employed for the evacuation of drilling mud, drilling cuttings, cement, spills, and brinewater from production tanks, among other purposes. Insump pits, treatment plants, or farm fields may be used to dispose of this waste if the amounts are within acceptable limits.

Others

Aside from exposing subterranean utilities, vacuum trucks are also utilized for other purposes. The earth must be dug to a depth sufficient to provide a stable foundation for the building that will be built on top of it prior to the installation of several pieces of subterranean equipment. Underground utilities can contain things like lamp poles, traffic lights, road signs, and even commercial grade trees for landscaping, depending on their location. In order to prepare the ground for installation, water is blasted upon it, and the muddy result is sucked up by the vacuum truck.

tractor backhoe, tracked or wheeled excavator, ditch witches).

In some cases, air excavation might be utilized in place of hydro excavation in order to save money.

When it comes to identifying subsurface electrical wires and gas lines, air excavation is frequently employed.

Examples

A typical vacuum truck in India has a capacity of 3,000 litres (660 imperial gallons; 790 US gallons) and services around five different buildings every day. With a 2-year emptying cycle, one truck can serve around 3,000-4,000 structures, or 15,000-20,000 people, according to the EPA. Manual scavenging, which is a dangerous and humiliating practice, was made illegal in India in 1993 by the Manual Scavenging Act. Vacuum trucks are an alternative to this dangerous and humiliating practice. For example, in the city of Bangalore alone, it is believed that up to 200 such trucks operated in 2012, feeding a population of more than 3 million people.

Every two years, a septic tank must be emptied for a fee ranging between 1,200 and 3,000 Rupees (USD 24 and 60) per tank.

Bins of compost are often found throughout Bangalore, where they are utilized mostly on banana and coconut plants.

Because compost may be used to replace expensive fertilizer, it has the potential to create cash. It is estimated that each vacuum truck will require 1 hectare (2.5 acres) of land for composting if the septage is discharged on it.

See also

1. L. AbStrande, M. Ronteltap, and D. Brdjanovic (eds.) (L. AbStrande, M. Ronteltap, and D. Brdjanovic) (2014). On page 81 of the Faecal Sludge Management (FSM) book, titled Systems Approach for Implementation and Operation, there is a discussion on systems thinking. IWA Publishing (ISBN 978-1780404738)
2. O’Riordan, Mark (ISBN 978-1780404738)
3. (April 2009). An investigation on the methods of pit latrine emptying is being conducted (PDF). PROJECT 1745 OF THE WRC Sludge buildup in VIP latrines is managed in a systematic manner. pp. 15 pages Obtainable on January 18, 2017
4. Pumps from Wastecorp. “Mud sucker diaphragm pumps” are a type of diaphragm pump that suckers up mud (PDF). Wastecorp, retrieved on January 18th, 2017
5. “Hydrostatics”. J.B. Calvert composed the music for this piece. The 5th of January, 2007. Obtainable on January 18, 2017
6. L. Strande, M. Ronteltap, and D. Brdjanovic are the editors of this volume (2014). Faecal Sludge Management (FSM) book – Systems Approach for Implementation and Operation (Systems Approach for Implementation and Operation). IWA Publishing, UK (ISBN9781780404738)
7. Lloyd Kahn, John Hulls, and Peter Aschwanden, “The Septic System Owner’s Manual,” IWA Publishing, UK (ISBN9781780404738)
8. In Can Hydro Excavation Work for Your Industry?, Shelter Publications (ISBN0-936070-40-4) on page 49 (ISBN0-936070-40-4). Adler Industrial Services is a company that provides industrial services. “Low Impact Air Excavation” was retrieved on the 8th of December, 2021. Adler Industrial Services, which was retrieved on December 8, 2021. Biome Environmental Trust’s Vishwanat Srikantaiah explains how to provide sanitation without the need of pipelines. Water and Food Security: The ‘Honeysucker’ Approach to Human Waste Management Using Vacuum Trucks, presented at the World Water Week in Stockholm in 2012, and published in the Abstract Volume, pp. 239–240
9. Elisabeth Kvarnström is a consultant at Vectura Consulting, Inc. Joep Verhagen works for the Internet Relay Chat (IRC). Mats Nilsson, Minnesota Context Vishwanath Srikantaiah is a biome researcher. In the Biome, Karan Singh is working with Shubha Ramachandran. “Stains without pipelines are called “honeysuckers.” Is Eco-san at his job?” (PDF). 2 September 2012 – retrieved 2 September 2012. author list (link)
10. CS1 maint: numerous names: authors list (link)
11. Rainwaterharvesting.wordpress.com is a website dedicated to rainwater harvesting (10 November 2011). Manual scavenging should be eliminated using the Honey-sucker strategy, according to the authors. 2 September 2012
12. Retrieved 2 September 2012

External links

Displaying 1-10 of 39 results plus 5 The International 4400 SBA 4×2 is a 2016 model. Septic trucks 2016 International 4400 SBA 4×2 septic trucks Engine: Navistar 9 9.3L6 with a turbocharger. A single axle.

Detail Score

Originally uploaded at pumper.com 2022 INTERNATIONAL HV607 Septic Trucks2022 INTERNATIONAL HV607 Septic Trucks HV607 SBA, 4,200-gallon steel IV tank, Jurop DL180, HV607 SBA, HV607 SBA, HV607 SBA.

Detail Score

Pumper.com published the original version of this article. The 98 Freightliner 3,800-gallon waste tank with Jetter is one of the most popular septic trucks on the road today. This is the truth that we utilize.

Detail Score

This picture was first uploaded at pumper.com+22012 Peterbilt 367 septic tank Peterbilt 367 septic tank truck purchased in 2012. Isx15 has 500 horsepower and an 18-speed transmission. The rear axle is a 44. 4…

Detail Score

Pumper.com published the original version of this article. Freightliner FL112 Septic Trucks, model year 2001 Transway tank capacity of 3,600 gallons on a 2001 Freightliner FL112 truck. This is a Cat C-12 motor. 32…

Detail Score

Pumper.com+32005 International 7600 was where the first post was made. 2005 International 7600 Septic Trucks. The tank has a capacity of 3,250 gallons and has traveled 550,000 kilometers. Jurop LC520…

Detail Score

Pumper.com published the original version of this article. Septic Trucks from the year 2000International Septic Trucks. 470hp Detroit, 10-speed transmission, air conditioning, cruise control, 3,500-gallon fuel tank.

Detail Score

Pumper.com published the original version of this article. Sterling Acterra was founded in 2004. Septic trucks manufactured by Sterling Acterra. A 2,500-gallon storage tank. a 300-gallon freshwater reservoir.

Detail Score

Originally published at pumper.com+4 (in English). 1990 WHITE/GMC Glider kit, Cummins 400, 8LL, tandem axle, 14,000 miles on the oSeptic Trucks oSeptic truck The 1990 WHITE/GMC Glider Kit is powered by a Cummins 400 with an 8LL transmission and has 14,000 miles on it.

Detail Score

Pumper.com published the original version of this article. 2005 International, DT466, 263k,Allison Auto, air brakes, air conditioning, cruise: NeSeptic Trucks2005 International, DT466, 263k,Allison Auto, air brakes, air conditioning, cruise: NeSeptic Trucks Allison automatic transmission, air brakes, air conditioning, cruise control:.

Detail Score

Pumper.com published the original version of this article.

Place a Classified Ad

Are you looking to sell your used equipment or are you looking to hire someone? Post a classified ad on Pumper.com!

View Classifieds by Category

From the last seven days

Information

Classifieds Frequently Asked Questions Subscribe to the RSS feed for Classifieds.

February 2022Digital Issue

Take a look at our most recent digital issue!

Septic System Services — R.A. WEBBER & SONS, INC

Septic Systems are a type of sewage disposal system. Septic System Pumping Services are available 24 hours a day, seven days a week. We provide septic service on a 24/7 basis throughout the year.

In addition, we install or rebuild septic systems. You can rely on us to complete the job correctly because we have 60 years of experience. Please contact us at 207.725.7727 to discuss your requirements. (In the event of an emergency septic situation after hours, phone 207-449-9140)

We offer septic system installation and cleaning, as well as high pressure jetting service.

Septic system installation and drain field services performed by certified professionals Cleaning of septic tanks Inspections of septic systems Lift stations are maintained. Camera on a line Service for high-pressure jetting in the industrial sector (for opening frozen septic drain lines)

When installing a new septic system…

Obtaining a soil design from an experienced soil designer/engineer will be the first step in the process when you engage us to design and construct your new septic system. We can assist you in locating and working with a designer. Following that, one of our professionals will walk through your home and generate an estimate for you. Prices vary based on the design and any site preparation that may be required.

How often should my septic tank be pumped?

We recommend that you get your septic tank pumped/cleaned every 3-4 years, depending on the size of your family and the amount of water you use each day. A standard tank has a capacity of 1000 gallons and is meant to accommodate three to four people in three bedrooms. If there are less people in your house or you utilize the property seasonally then you may be able to wait longer than 4 years, although we don’t advocate going beyond 6 years between pumpings. Please contact us to discuss your particular circumstance.

How does my septic system work?

All waste (from your sink, washer, toilet, and tub) drains through a pipe that runs from your house to a tank on the property. The top layer is made up of paper and unbroken down solids, the middle layer is made up of grey water, and the bottom layer is made up of broken-down solids that have accumulated. Grey water leaches out of an outlet baffle and into your distribution box, where it is equally spread over your leach field, according to your specifications.

Can I drive on my tank or leach field?

It is highly suggested that you do not drive, park or construct over the tank or leach field. The septic tank and leach field are incapable of supporting weights in excess of several hundred pounds.

What can I flush down my toilet?

Normal human waste, toilet paper, and grey water are the only items that should be disposed of in your system, according to the manufacturer. The flushing of some feminine products/applicators, baby wipes, paper towels, and cleaning wipes is not suggested, despite what the product’s packaging may state.

What can I put in my septic tank to ensure bacteria growth?

Nothing is advised by us or by the state of Maine at this time. Bacteria should be produced by your system on its own.

What should I be prepared for during the winter months?

Winter in Maine can bring about a variety of issues that can be difficult to diagnose, fix, and repair, especially when the weather is cold. Snow protects your septic system by acting as an insulator. Due to the fact that frost may penetrate quite deeply into the ground when there is minimal snow and freezing temperatures, difficulties frequently develop during these conditions. It is possible that lines, the tank, or your leach field can freeze, or that your pump will malfunction. If any portion of your system freezes, it will have to thaw on its own; however, we may assist the situation by pumping the tank on a regular basis (often once a month) until it thaws.

What can be done if my drain lines are clogged?

Our industrial high-pressure jetting service employs high-pressure water to help in the clearance of blocked sewage systems and drain lines in industrial and commercial settings. Drain pipes that have been clogged due to root incursion or ice accumulation can be removed by employing our jetting service. If the problem is caused by root incursion, we propose that the tree be removed as well.

Septic systems can collapse due to poor design or construction, overloading, or inadequate maintenance. It is estimated that your septic system will last between 15 and 25 years if it is kept in good working order and maintained.

What can I do to properly care for my septic system?

• Ensure that your tank’s baffles and tees are in good operating order and that there is no sludge accumulation
• Ensure that you clean your tank on a regular basis and that you retain a written record of your cleanings. Food waste should be composted or thrown away in the trash, not in the garbage disposal
• Keep a grease can on hand for emergencies. Mark the location of your septic system so that you can keep it safe from cars and encroaching trees. Installing water-saving gadgets can help you save money on your water bill. Cleaning agents that are non-toxic should be used.

• If your septic system is showing indications of breakdown, please contact us.

• Don’t use a waste disposal
• Pouring automotive oil, cooking oil, or grease down the drain is not recommended. Driving across the septic system and leach field is not permitted. Planting plants or trees over the leach field is prohibited. Do not use phosphorus-containing detergents. Make sure you don’t spill any paint or paint thinner down the sink drain. Use of drain or septic system cleansers is not recommended. Contact us immediately if you see any of the following indicators of failure in your septic system:

How do I know if my septic system may be failing?

• Sewage odor near the septic tank or leach field
• A pool of water forming over the tank or leach field. Drains and toilets that are slow to drain
• In the winter, a patch of brilliant green grass over the leach field, or a lush green growth over spongy ground in the summer, when the other grass is sluggish to germinate and develop

Can I request a grease trap be cleaned?

Grease traps are cleaned by us. This is mostly for business properties like as restaurants, although we can clean most little ones in private houses as well as most large commercial sites.