How To Find Clog In Septic Tank? (Best solution)

How do you unclog a septic tank?

Ways to unclog a main drain or full septic tank: Use a snake or water jetting to unclog the main drain pipe. Check the inlet and the outlet of the septic tank for any blockage due to solid wastes, scum and so on. Check the distribution box located between the septic tank and the percolators. Check the area around the percolators.

How do I know my septic tank is clogged?

Use a sewer line camera: A professional septic tank technician can scope the tank and system with a camera to inspect the drain lines for damage or blockage. Check septic tank filters: Intake and outlet drains can become blocked by floating solid waste or high sludge levels in your tank.

How do I unclog my septic tank?

Sprinkle the drain with baking soda, then dump vinegar into the pipe. Leave the mixture to sit in the pipe for an hour or two. Finally, flush the drain with hot water. If the clog is small, this could be enough to clear the pipe.

How do you diagnose a clogged drain?

Signs of a clogged drain:

If you see or hear your toilet bubbling.
Water backs up to your sink, bathtub, shower, or commode.
Water is coming out from beneath your commode.

Water is slow to drain from your sink, bathtub, shower, or commode.
Bad odor coming from drains.

How do you tell if the leach field is clogged?

Stay vigilant for five signs your drainfield does not drain correctly anymore.

Slowing Drainage. Homeowners first notice slower than usual drainage from all the sinks, tubs, and toilets in a home when they have a compromised drainfield.
Rising Water.
Increasing Plant Growth.

Returning Flow.
Developing Odors.

Why does my septic keep clogging?

A clogged septic tank or drain is caused by a number of things: An obstruction in the line caused by a buildup of pressure between the object and the inner circumference of the pipe. An example is a diaper stuck in the sewer drain line. There is simply too much diaper to fit through the line at once!

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How do you find a clog in a sewer line?

Run the water in the sink closest to the toilet for about a minute. If the toilet bubbles (gurgles) or the water level in the toilet rises, you may have a clogged sewer line. When your washing machine drains, the toilet overflows or water backs up in the tub or shower.

Can you unclog a drain field?

Over time, the leach field can become damaged or clogged due to buildup of material. A full septic tank can cause problems by allowing solid waste and sludge to overflow into the drain field. While a clogged drain field cannot be snaked out and cleared like a drain pipe, you can take steps to alleviate the problem.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.

Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.

Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.

If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.

Advertisement
s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.

Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.

4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.

If at all possible, take a shower or bath as soon as possible after working on your septic tank

When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.

5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.

Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.

6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.

Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.

In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.

If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.

2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.

2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with a ratcheting motion. Using a mechanical auger, you can cut through a clog using a long metal cable that you insert into your pipes and has a revolving bit. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the pipe. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the obstruction.

3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.

It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.

4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it

If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.

Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.

It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.

6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished

Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.

Because the cleaning solution contains microorganisms from your septic tank, do not pour it down another drain.

1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.

Other than water and natural garbage, avoid flushing anything down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle

Therefore, any additional products can cause the entire system to back up and fail. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the trash with the ordinary garbage. Other people in your home should be made aware of what they may and cannot flush down the toilet to avoid clogging the drains.

1 Other than water and natural waste, avoid flushing anything down the toilet or down the drain. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle, thus any additional stuff can cause the entire system to clog. Paper towels, wet wipes, food scraps, and other solid waste should be disposed of with the usual garbage to avoid clogging the pipes. Make it clear to other people in your home what they may and cannot flush down the toilet to avoid clogging the pipes.

It will also save you money on your utility bills if you keep your water consumption to a minimum.

3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.

Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.

4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping

Not every septic system will be equipped with an effluent filter
However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.

5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement

Create a new question

Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty

Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
They are available.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Things You’ll Need

Hose

Paper towel
Mechanical auger
Safety glasses

Work gloves

About This Article

The writers of this page have together authored a page that has been read 315,143 times.

Did this article help you?

Plumbing

Unclogging
Septic Tank
Blocked

Septic System
Pipes and Drains
How to Plumbing

Pumping out a Septic Tank, Unclogging a Septic System, Pipes and Drains, Plumbing Tips, and more.

Reasons for a clogged bath or kitchen drain:

Dumping food or solid stuff down the drains is prohibited. Putting oil or other sticky substances into the kitchen sink
Dumping chemicals or paints down the drains is not acceptable. Hair down the drains of the bathtub and shower

Ventilation that is improper and/or insufficient Drainage system that is clogged Septic intake or outlet that is clogged

Common Causes of Clogged Drains

Making a mess by pouring food or solid stuff down the drain; Emptying the kitchen sink of grease and other sticky substances. Chemotherapy drugs or paints being poured down the drain; Bathtub and shower drains clogged with hair ventilation that is insufficient and/or improper Main drain tube is clogged; Septic intake or outlet that has become clogged.

Ways to unclog a drain:

Baking soda and vinegar drain unclogging is an alternate and more natural method of unclogging a clog in the drain. Vinegar and baking soda have no negative impact on the environment. A plunger can be used to clear a clogged drain. This method will work for clogs of modest size and will not cost you much money. If the obstruction continues, consult with a professional. Although it is more expensive, unclogging a drain with a cable or auger may be quite successful in removing solid obstructions in the drain and even breaking through thick roots
Yet, it is also more efficient. Pouring paint or other sticky and oily materials down the drain can produce blockages, and high-pressure water jetting is more successful at clearing them.

Before you begin utilizing high-pressure water jetting to unclog your drain, be sure that your pipes are capable of withstanding the high pressure that will be applied by the high-pressure jet. Otherwise, the high pressure will rip your pipes apart. Hydro jetting is best left to the professionals, such as your local plumbers.

Ways to avoid clogged drains and a full septic tank:

Avoid blocking your sink drain by pouring solid objects or oily stuff down it. Cover the drains in your toilet and kitchen with filters to protect hair and solid things from entering the drain system. Make certain that suitable numbers of air vents are provided, and that the diameters of the vents are acceptable for all of your fixtures.

Problem II: All of your home’s drainage lines are sluggish to drain, and the drain water from the main drainage line is backed up in a pool.

Possible causes for a slow drain:

An obstruction has formed in a section of the main drain line

An obstruction has formed at the drain intake or outflow of the septic tank. A section of the percolation pipes has become jammed
The septic tank vent has become obstructed. Low temperatures have caused the sewage tank or septic vents to become iced over
One of the distribution boxes has been blocked off

Ways to unclog a main drain or full septic tank:

To unclog the main drain line, use a snake or high-pressure water jetting. This is the work of a professional. By virtue of his knowledge and experience, he can snake a sluggish drain, determine if the blockage is caused by solid waste, oily substances, or roots, and apply the most appropriate procedure to unclog the drain. Verify that there is no blockage at the entrance or exit of the septic tank owing to solid wastes or scum, among other things. Check the distribution box, which is placed between the septic tank and the percolators, for easy flow once the block has been removed. If there are any obstacles, they should be removed. Check the region around the percolators for any problems. Check to see whether the area is damp, marshy, or smelly. It indicates that the percolation process is not working properly. Another type of work is where the earth is not absorbing the drain water at the same pace as it is being discharged. It might be because your water use has increased recently as a result of the increased number of guests, or it could be because the soil has been saturated as a result of moisture from other sources such as rainfall (which has been above average), or both. If your septic tank has frozen due to inclement weather, call an expert right away
If your septic tank has frozen due to inclement weather, call an expert right away. Use the septic tank as a storage tank until the tank has completely thawed on its own if you can’t find a professional or the tools you need to do the job. You will be able to hang on for a longer period of time if you make wise use of water. Winterizing the septic tank before the following winter will help to prevent it from freezing in the future.

Preventive measures to avoid a blocked main or slow drain:

To unclog the main drain line, use a snake or high-pressure water jets. Experts have completed this task. He understands how to snake a clogged drain, determine if the obstruction is caused by solid waste, oily substances, or roots, and employ the most appropriate procedure to unclog the drain. Verify that there is no blockage at the entrance or exit of the septic tank owing to solid wastes or scum, among other things. a. Check the distribution box, which is placed between the septic tank and the percolators, for easy flow after removing the block. If there are any obstacles, remove them. Check the area around the percolators for any potential hazards or problems. See whether it’s soggy, marshy, or smelly before you enter. Percolation is not taking place properly, as shown by this message. Another type of work is where the soil is not absorbing the drain water at the same pace as it is being discharged Either your water use has increased recently as a result of more guests, or the soil has been saturated as a result of moisture from other sources such as rainfall (which has been above average), or a combination of the two, it might be the case. If your septic tank has frozen due to inclement weather, call an expert right away

If your septic tank has frozen owing to inclement weather, call an expert right away
Use the septic tank as a storage tank until the tank has completely thawed on its own if you can’t find a professional or the tools you require. Your ability to maintain your grip for an extended period of time will be aided by the usage of water sparingly. Winterize your septic tank before the following winter to stop it from being frozen in the future.

External References

Natural ways to unclog a drain include the use of vinegar, baking soda, and water (theGoodHuman.com), among others. On eHow.com, you can learn how to unclog a sink naturally.

Your bathroom drains may be running slowly, and you may be thinking pouring some chemical drain cleaner down the drain to clear the clog. However, in these situations, rather than relying on potentially harmful drugs, it is always preferable to consult with medical specialists for a diagnosis. There are several possibilities for what can be causing your clogged drain, including a plumbing vent issue, an issue with your sewer line, or even a septic issue.Learn about three septic problems that might have symptoms that are similar to drain clogs.1.

Solids are prevented from moving down the line to the leach field by the output baffle, which prevents clogging of the pipelines.

A blockage in any of these baffles can prevent wastewater from draining properly into the tank.
Unlike a drain blockage, however, it is impossible to remove with a chemical cleaner; instead, a professional septic service specialist will be required to eliminate the obstruction.2.
In addition, there is the pipe that runs from your house to the septic system.

However, no matter what material it is made of, this major sewage line is prone to blockages, earthquake damage, damage from huge machinery being driven through the region, and tree root damage, among other things.
Drainfield FailureWhile many people are unaware of it, septic systems have a finite lifespan that must be maintained.
There are a variety of different ways in which drainfields might fail, which is why rules require you to have a reserve leach field site when you’re building a septic system.

When solids are forced out to the leach field, this problem, which is frequently caused by neglect, has the potential to degrade the drainage capacity of the soil due to the types of bacteria that flood the area when solids are forced out to the leach field.Compaction is another issue that can cause the leach field to fail prematurely.

Because the field’s operation is dependent in part on bacteria that require air in the soil to survive, this can render the area nonfunctional.However, regardless of the cause, a drainfield that is failing significantly reduces the wastewater processing abilities of your system, which can cause drains to slow or block in a manner similar to a clog.These three septic problems can sometimes present symptoms similar to those of a simple clogged drain.

These problems can eventually escalate into far more significant problems, such as sewage backup in your house.

Whether you require a diagnostic visit, sewer line cleaning, or septic system cleaning and pumping, call Upstate Septic Tank, LLC, immediately. We’ll be pleased to assist you in keeping your septic system in the best possible condition.

How to Get Rid of Septic Tank Clogs

That feeling you get after flushing the toilet and nothing comes out is wonderful, isn’t it? It might be amusing to hear your toilet gurgle or to hear the water flowing continually, but it can also be frightening to hear the water level climb as you watch it. It’s an unpleasant situation, not to mention that it necessitates a great deal of hard effort and elbow grease in the process of plunging and cleaning up the subsequent mess. When anything gets stuck in your pipe or your toilet makes a mistake, you may have blockages and backups.

Clogs can form inside your septic tank from time to time, causing blockages in the tank and drainage troubles to arise.
What if we told you that you could fix it yourself?

While bringing in a professional may be required in certain cases, there are several things you may do to resolve the situation without calling for assistance right immediately.
In your search for solutions to unclog your septic tank, you may want to try things like slowly pouring hot water down the drain or pouring vinegar down your drains to break up obstructions, to name a few possibilities.
In order to clear blockages from your drain, you may need to use a professional drain cleaner that you pour down the drain.

However, although these chemical cleaners will eat away at obstructions, they will also kill off beneficial bacteria in your tank, disrupting the delicate bacterial balance in your tank.
Yes, the nasty bacteria will die off, but the healthy bacteria will also die off.

With regard to drain cleaners, the best option is to select one that has concentrated bacteria and enzymes that will eat away at the dangerous bacteria and materials in your tank while simultaneously boosting the amount of helpful bacteria and enzymes in your tank.

In the case of trying to rehabilitate your septic system, using a product such asSeptic Blastcan be really beneficial.

After that, the product will begin to gently eat away at the obstructions in your tank, therefore it’s vital to be patient throughout this process.

It is possible that you may need to repeat this method every day for several days in a succession before the blockage is completely removed.

Your septic tank has now been cleansed and returned to its original level of functionality.

Fortunately, here at Green Gobbler, we provide excellent alternatives to harsh chemicals and maintenance supplies, allowing you to address your problems while minimizing the impact on the environment and your plumbing system. Choose Septic Blast to do the task right away!

How to Unclog a Septic Tank

A septic system is a wastewater treatment system that is self-contained and located underground. This type of system is most commonly used in rural regions since the distance between households is so great that centralized sewer systems are not particularly cost effective in these places. They are used to dispose of domestic garbage on-site, and because of their basic design, they are less expensive to install and maintain than other methods. As a matter of fact, they are typically built in a homeowner’s backyard, and as a result, they do not necessitate the use of sewage lines, resulting in them being less harmful to the environment.

Wastewater from the residence is sent down the sewage line and into the septic tank, where it remains.

There are three layers of wastewater that form inside the tank: solids that are lighter than water (e.g.
The sludge and scum layers stay in the tank, where bacteria that are naturally found in wastewater break down the particles and remove them from the system.
In this case, the cleared liquid flows from the tank to the drainfield or distribution device, as previously stated.

This consists of a succession of trenches or a single bed coated with gravel or course sand that is buried one to three feet below the surface of the ground and is connected to the main sewer line.
Another benefit of having a drainfield is that it treats wastewater by allowing it to flow from the pipes into the gravel and then further down into the ground.
Despite the fact that this approach is successful, it is prone to failure (particularly if not much attention is being paid to it).

Overflowing toilets on a consistent basis
It is the drains that are making these strange gurgling sounds. When you empty a sink, the water will back up into the shower or bathtub. You will see that there is an overflow where your washing machine is positioned. If foul odors pervade the air or garbage is visible on the ground, it is time to act. Your drains are emitting an unpleasant odor
Your toilets flush at an inordinately slow rate

Streams and ditches in the vicinity get contaminated as a result. You’ll see dips in the earth around the soakway drain or the septic tank
These are called septic tank dips.

How to Solve a Septic Tank Clogging Problem

There will be times when you have septic tank problems, but you will not always have to dig up your tank or drainfield to remedy the problem. When you dig up your septic tank, the last thing you want is for your yard to become a mucky mess that will take days to clean up once you have finished digging. Following that, here are some suggestions to assist you in unclogging your septic tank: 1: Determine what is causing the blockage to occur. As previously said, you do not always have to dig out your tank when you have a clog in your toilet.

In reality, the problem may just be a buildup of debris that has accumulated through time and has to be removed.
They can utilize technology to establish whether or not there is a problem with your system in the first instance.
If your problem is not mechanical in nature, you will not require the use of any of those equipment to resolve it.

It is possible to unblock obstructions using bacteria since it behaves like an acid.
Sludge will be released by adding chemicals to the mix, but this will also allow the sludge to enter your system, making the situation more worse.
You may search online for bacteria merchants who are willing to sell to you.

Why should this be the case?
4: Allow bacteria to do its work.
This is due to the fact that you have no way of knowing how much sludge you have in your tank, as well as in your lines and field.

It is common for bacteria to be chosen as the remedy of choice because they are organic and will not affect systems in the same manner that chemicals would do. Bacteria reproduce and consume any organic matter that comes into contact with them as they move through the environment.

Reducing the Clogging of Septic Tanks

Maintenance is always essential in ensuring that you do not suffer as a result of a clogged septic tank. Yes, sludge accumulates over time, but taking proper care of your system now will save you a lot of hassle in the future. Although it is advised that you get your tanks cleaned out once a year, the frequency with which you do so is determined by the following factors:

The number of people that live in your house
The size of your home. The quantity of wastewater produced (the amount created is, of course, based on the number of people living in your household)

And The amount of particles present in the wastewater (for example, the use of a garbage disposal influences the amount of solids present in the wastewater)

It is not necessary to do routine maintenance on your septic tank’s absorption field. Nevertheless, this does not imply that you should take it for granted. Fortunately, there are certain things you can do to ensure that it is always working and protected.

Do not drive automobiles, trucks, or heavy equipment through the field. Do not grow trees or bushes in a field since the roots of these plants can get into the irrigation system and cause a blockage. Don’t use hard surfaces to cover the playing field (concrete, asphalt, etc). Grass is the most effective ingredient to employ if you want to provide shelter since it prevents erosion and drains excess water. Surface runoff water from roads, rooftops, patios, and other locations should not be diverted back into the fields.

The Most Common Causes Of A Clogged Septic Tank – How To Fix

Driving automobiles or large-scale equipment across the field is prohibited. Trees and bushes should not be planted near irrigation lines due to a risk of root intrusion and clogging. Don’t use hard surfaces to cover the field (concrete, asphalt, etc). It is recommended that grass be used while providing cover, as it reduces erosion and eliminates excess water; however, other elements such as trees and shrubs can be used as well. Surface runoff water from roads, rooftops, patios, and other locations should not be diverted back into the field.

How to Clear a Clogged Septic Line

If you have ever had to deal with a clogged drain, you are aware that the cleanup procedure is anything but enjoyable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.

Symptoms of a Clogged Drain

In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.

2. Water Going the Wrong Way

Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Before you call a septic company, there are a few things you may do to try to unclog your drain on your own that may be successful.

1. Avoid cleaners with chemicals

Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste.

Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

2. Pour hot water down the drain.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.

3. Use baking soda and vinegar.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see if boiling water may assist before contacting a professional.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.