How Much Does A 1500 Gallon Plastic Septic Tank Cost? (Solved)

The average price of a concrete septic tank is between $720 and $2,050, a fiberglass tank ranges from $1,600 to $2,000, and a plastic tank costs $830 to $1,900.

Plastic Septic Tank Prices.

Tank Size Average Cost
1,500 Gallon $1,270 – $1,900

2

How much do septic tanks cost to install?

  • A traditional septic tank for a 3-bedroom house will cost around $3,900 to install on average. For conventional systems, prices start around $5,000 in the Midwest, whereas in coastal areas, one could cost $10,000 or more. For an engineered system, the costs will average around $15,000 for installation.

How much is a 1500 gallon tank?

How much does a 1500 gallon capacity precast concrete septic tank cost? Answer: The average retail cost for a 1500 gallon precast concrete septic tank size is $1,590.

How long do plastic septic tanks last?

A septic tank can last between 20 and 40 years. The lifespan depends on the tank’s material. A steel tank lasts 20 years, while a concrete tank lasts 40 years. Plastic tanks can last as long as 30 years.

Is a plastic septic tank better than concrete?

Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.

How often should a 1500 gallon septic tank?

The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.

How does a 1500 gallon septic tank work?

1,500 gal tank There are perforated pipes that run under the soil and on top of gravel (aggregate); these stretch the entirety of the area so ensure the waste water is evenly distributes. The liquid slowly trickles from the pipes into the gravel and down through the soil. The gravel and soil act as biological filters.

How far apart are the lids on a 1500 gallon septic tank?

The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid. If you are extraordinarily lucky, the as-built drawing is accurate and you have hit the lids spot on.

What size are concrete septic tanks?

What sizes do concrete septic tanks come in? Standard tank sizes are 1000 gallon, 1250 gallon, and 1500 gallons nationwide.

How deep can you bury a plastic septic tank?

The general rule of thumb is that most septic tanks can be buried anywhere from four inches to four feet underground.

How big of a septic tank do I need for a 3 bedroom house?

The correct size of the septic tank depends mostly on the square footage of the house and the number of people living there. Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank.

Should bath water go into septic tank?

In MOST household septic systems, yes. Probably 98%+ of septic systems receive all of the waste water from the house – tub, shower, sinks, washing machine, dishwasher, etc.

1500 Gallon Plastic Septic Tank – 2 Compartment

Please pick an item from the drop-down menu.

Part Number: N-41760
Capacity: 1500 Gallons
Dimensions: 135″ L x 55″ W x 70″ H
Availability: In Stock
Ships From: CA, GA, MN, NY, OH, OK, UT, WA
Technical Drawings
Install InstructionsTank Drawing
*Stock subject to change. Please call to confirm.

1500 Gallon Two Compartment Septic Tank – 2 Manways

  • Pre-plumbed with PVC tees and septic adapters already fitted

Important Note: Tank must be left 1/4 full at all times including installation.

Part IAPMO Ships from
41760 No MN, OH, GA, OK, UT, NY, WA
41761 Yes CA

Pipes and septic adapters have already been placed in the pre-plumbed system.

State RequirementsApprovals

Our tanks must comply with a variety of health code standards that are in place across the United States. These codes are governed by the state or county in which you live, depending on your location. Please speak with your local health agency for assistance in choosing the tank you require.

Septic Tank Standards:

  • Tank that has been rotationally molded into a single component that is seamless and waterproof
  • Neither soil chemicals nor sewage gases have an effect on polyethylene. Tanks made of polyethylene will not rust or corrode. Strict quality standards guarantee that the septic tank is safe for the environment. Connections to the plumbing system according to Schedule 40
  • Standard plumbing is something that all area installers or professionals are familiar with. Extensions for the risers are not included. Excellent shipping item that is virtually unbreakable.

Frequently Asked Septic Tank Questions

  • If you ask the question, no, you cannot place the plastic septic tank beneath a driveway since it is not authorized, and doing so will invalidate the guarantee. Keep tanks out of the line of heavy and vehicle traffic regions, and don’t put them beneath driveways. If you’re looking for bedding or backfill, a sand/gravel mixture (sometimes known as “pea gravel”) is a good option. (Please refer to the installation instructions above.) 3. Is it possible to utilize a septic tank above ground? Underground plastic septic tanks are intended for use solely below ground. They are not intended for above ground usage. The use of above-ground storage tanks may result in the tank’s distortion and degradation. When compared to underground storage tanks, it is significantly more cost-effective to employ an above-ground storage tank that has been particularly constructed for above-ground uses. 4. Can hot water be held in plastic septic tanks? Yes, but only if the water temperature in the tank does not exceed 100 degrees Fahrenheit. The maximum storage temperature for polyethylene storage tanks is 120 degrees Fahrenheit. Containments with a temperature greater than 120 degrees Fahrenheit, even for a short period of time, might degrade the structural integrity of the tank and making it more prone to deformation and collapse
  • 5. How do you gain access to underground plastic septic tanks? Each underground plastic septic tank is supplied with manhole access hatches, which allow you to gain access to the tank (1 or 2 depending on tank). Additionally, risers can be placed to the top of the tank to provide for access from the ground level. A riser would save you from having to dig up the dirt above the manway in order to get access
  • Otherwise, 6. Is it possible to pick up a plastic septic tank in the area? In most circumstances, yes. You must place an order in advance in order to pick up a plastic septic tank and save money on shipping. When you are notified that your tank is ready for pickup, Plastic-mart will offer you with a six-digit trip number that will allow you to come in and pick up your tank Monday through Friday from 8:30 a.m. to 2:00 p.m. Plastic-mart and the local producers are grateful for the chance to provide local pick-up as well as the collaboration necessary to ensure that the process is as efficient as possible.
SKU N-41760
Part Number N-41760
Mfr. Part Number 41760
Capacity (Gallons) 1500
Dimensions 135″ L x 55″ W x 70″ H
Weight (lbs) 483
Material Polyethylene
Manufacturer Norwesco
Manufacturer Warranty (years) 3
Availability In Stock
Technical DrawingsGuides
Technical Drawings Install InstructionsTank Drawing
Shipping From CA, GA, MN, NY, OH, OK, UT, WA
Freight Class 400
Shipping Length 135
Shipping Width 55
Shipping Height 70
Shipping Weight (lbs) 483

RatingsReviews

  • Tanks for storing water (cisterns)
  • Tanks for storing water (cisterns)
  • Tanks for holding water (cisterns)
  • Tanks for holding water ( Liquid Transport Tanks (PCO)
  • Stackable Water Tanks (Brine Storage Tanks)
  • Forkliftable Water Tanks (Forkliftable Water Tanks)
  • Stackable Oil Storage Totes (Stackable Oil Storage Totes)
  • Fuel Tanks (PCO)
  • Pumps (PCO)
  • Water Pumps (New Viqua)
  • Plastic Open Top Tanks (Open Top Cylindrical Tanks)
  • Open Top Rectangular Tanks
  • Open Top Cone Bottom Tanks
  • Norwesco Bruiser Tank Custom Plastic Fabrication
  • Tank Manufacturers
  • Blog
  • Rain Barrels
  • Rainwater Tanks
  • Custom Plastic Fabrication

1500 Gallon 2 Compartment Plastic Septic Tank (Preplumbed)

The following items are included in the 2-compartment septic tank: Septic tanks manufactured by Norwesco are one-piece construction, which eliminates the need for further assembly and so reduces installation time and labor.

  • Rugged, one-piece tank that is rotationally molded and does not have any seams to leak
  • During the installation process, there is no need for any specific backfill or water filling. During pump-outs, it is possible to pump the water out completely. It is possible to install with 6″ to 36″ of cover
  • A septic tank or pump tank that can also be used for non-potable water is suitable for this use. Openings and lids for access are compatible with Norwesco manhole extensions, double-wall corrugated pipe, and ribbed PVC pipe.

Disclaimer: This tank is intended for usage below ground only.

State RequirementsApprovals

Our tanks must comply with a variety of health code standards that are in place across the United States. These codes are governed by the state or county in which you live, depending on your location. Please speak with your local health agency for assistance in choosing the tank you require.

Installation Video: (This tank already had plumbing installed when tank arrives)

  • A variety of health code standards exist throughout the United States that our tanks must adhere to. In your state or county, these codes are governed by the local government. Please speak with your local health agency for assistance in deciding the tank you will require.

Septic Tank Installation and Replacement Cost

The typical cost in the United States ranges from $500 to $5,000. The national average cost of a septic tank installation or the cost of replacing an outdated septic system is dependent on a number of different variables.

Septic Tank Installation Average Costs
National Minimum Cost $500
National Maximum Cost $5000
National Average Cost $1500

According to the Environmental Protection Agency, one in every five residences in the United States relies on a septic system for wastewater management (EPA). In the case of septic systems, you may have a septic system for your home alone, or you may be connected to a communal system that services a small number of homes. Untreated wastewater created by a house or company is treated on site by a septic system, which is an on-site treatment system. Sewage lines convey wastewater from your shower, toilet, sinks, clothes washer, and trash disposal away from your home and into a septic tank buried in your yard.

Solids are separated from floatable debris in the septic tank, and the leftover liquid drains from the tank through a series of perforated tubes and onto a drain field or leach field after being separated in the tank.

The usage of septic systems is popular in rural regions that do not have access to a centralized municipal sewer system.

Tank capacity ranges from less than 1,000 gallons to more than 2,000 gallons, with the size of the tank determined by the quantity of water you consume on a daily basis.

Condos, apartments, residences, business spaces, and other types of structures might benefit from septic system installation or replacement services.

What’s in this cost guide?

  • Soil type
  • Tank size and kind
  • Equipment
  • Installation
  • Maintenance
  • Lift station
  • And more. Septic systems that are not conventional
  • How septic tanks function
  • Signs that you need to upgrade your system
  • How to employ a professional

Alternative septic systems

Species of soil; tank size and tank type; equipment installation and maintenance; lift station; Septic systems that are non-conventional Septic tanks and the way they function; A list of warning signs that your system needs to be replaced; What to look for when hiring a specialist;

Signs you need a new system

Anyone would not want sewage water rising up through their front yard on one of the hottest days of the summer season (or even on the coldest day of winter). Waterborne pathogens such as protozoa, bacteria (such as E. coli), and viruses may be spread through fecal matter, making wastewater not just stinking and disgusting, but also potentially deadly. It is possible for unclean wastewater to drain through the soil and pollute the water you and your friends and neighbors drink if your septic system is leaky, overwhelmed, or otherwise compromised.

Knowing what indicators to look for might help you catch an issue before it becomes a major problem.

See also:  How Llong Can You Survive In A Septic Tank? (Question)

This includes having your septic tank pumped out by a professional every three to five years.

Other indicators may indicate that it is necessary to contact a septic system specialist as soon as possible to either repair or replace the system.

Plastic Septic Tanks

Ace, Norwesco, and Snyder Industries brand septic tanks are available at Tank Depot at competitive prices. Norway-based Norwesco has been manufacturing polyethylene septic tanks since 1980. Norwesco is the world’s biggest maker of polyethylene tanks. Norwesco has a wealth of knowledge and expertise to give you goods that have been tested and proved to provide years of dependable, trouble-free service. State and municipal health officials from coast to coast have certified Norwesco septic tanks, which are covered by a three-year warranty and have been in use for decades.

  • NORWESCO BELOW GROUND TANKS – Conversion OptionInformation about NORWESCO BELOW GROUND TANKS Choosing a location for the installation of your Plastic Septic Tank When purchasing a septic tank, it is important to examine the following characteristics.
  • Installation is a breeze.
  • Any Norwesco septic tank may be delivered to the project site in a pickup truck and handled by just two persons, depending on the model.
  • Construction is made of a single piece of rotationally molded plastic.
  • Design for Exceptional Strength The design of the ribs and the location of the ribs give the tank with exceptional structural stability.
  • Norwesco’s stringent quality control measures ensure that its septic tanks are safe for the environment.
  • 750, 1000, 1250, and 1500 gallon tanks are offered as single compartment or double compartment tanks (2/3 – 1/3) depending on your needs.
  • Pre-plumbed / ready to be put into service Norwegian Septic Tanks (750 gallons and greater) are delivered to you fully assembled and ready to be installed.
  • Tees are measured and cut to meet the requirements of each state code, ensuring that the tank you get is ready for installation.
  • This upgraded design outperforms existing lid designs in terms of strength and durability.

The gasket ensures a watertight seal around the opening of the lid. Accessory options are available. Manhole extensions and lid-riser combinations are offered to bring tank access up to code standards and to bring tank access up to code standards.

Plastic Septic Tanks – Two Compartments

Ace Septic TanksAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully document from date of manufacture.Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail.Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation.Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.Ace Septic / Cistern Tank AccessoriesRemember to order your state specific internal plumbing kit. Links:Septic Tank Product Description, Function and ServiceSeptic Tank Installation ProceduresSpherical Septic Tank Installation ProceduresSeptic Tank Divider Installation Procedures

Norwesco Septic Tanks300 + 500 Gallon Spheres may be used as Septic Holding Tanks (Pump Out).SeeUnderground Water Tanksfor others availablefor Septic Holding Tanks.The world’s leading manufacturer of polyethylene tanks, NORWESCO has been producing polyethylene septic tanks since 1980. With that kind of experience, NORWESCO offers you proven products that you can count on for years of dependable, trouble-free service.For septic system replacement and new home construction, NORWESCO‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any NORWESCO septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule.All NORWESCO septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode and require no additional coatings as other tanks do. NORWESCO’s strict quality guidelines ensure an environmentally safe septic tank.NORWESCO septic tanks come equipped with manhole covers and detailed installation procedures. Manhole extensions and lid/riser combinations are available to bring tank access to grade and to meet code specifications. The 750, 1000, 1250 and 1500 gallon sizes are available in both one and two compartment configurations.NORWESCO septic tanks are for BELOW GROUND USE ONLY. Using the tanks above ground may result in deformation of the tank. It is far more cost-effective to utilize one of NORWESCO’s above ground tanks that are specifically designed for above ground use and applications.The tanks described and shown on this page cannot be used as pump tanks and must be kept full at all times.PRE-PLUMBING: All of our NORWESCO septic tanks that are 750 working gallons andabove are “pre-plumbed” with PVC inlet and outlet assemblies. Assemblies andtheir components are made of either SDR35 or SCH40 PVC depending on state orlocal code requirements. All assemblies are sized according to code requirementsas well. Finally, an EPDM gasket is placed between the “T” assembly and thetank wall to assure watertightness. NORWESCO septic tanks will arrive to youready for installation.WATERTIGHT DOMED LIDS: All septic tanks manufactured at all facilities, are equipped with a watertight domed lid. This domed lid is significantly stronger than previous lids we have offered. When leaving our factory, the lid(s) will be attached to the tank with stainless steel screws and come standard with a foamed, polyethylene gasket between the lid and the tank. This gasket provides a watertight seal at the lid area.MANHOLE EXTENSIONS AND LID/RISER COMBINATIONS: Again, at all facilities, the notches in the manhole area(s) of the tank have been removed as the “interruption” in the manhole, or circle, weakens that area. The lugs on the accessories have also been removed. See tank accessories for more information on the accessory items.NORWESCO septic tanks are backed by a full three-year warranty and have been certified by state and local health departments from coast to coast. Where applicable, NORWESCO septic tanks have been certified by both IAPMO and CSA.Across the United States and Canada, there are certain health code requirements that our tanks must meet. These codes are regulated by the state, county or province.Click here for Septic Tanks in HawaiiTank Depot Tanks Light Weight – Durable – Easy to Install

1500 Gallon Septic Tanks

A monolithic residential septic tank with a capacity of 1500 gallons is intended to store a total of 1500 gallons of liquid. Septic applications for five-bedroom residences and pump tank stations benefit from this septic tank size, which is the best option available. As required by ASTM C 1227NPCA, the structural integrity of A.J. Foss concrete tank sizes complies with all applicable health code standards as well as best-practice recommendations.

Choose the Inlet and Outlet Option You Need

When it comes to residential septic applications, the monolithic, top-seam type concrete septic tank provides the flexibility of routing the pipe from the home to either one of the tank’s side or center inlet portions. The same options are available for the tank’s outlet pipe, which may be connected to the leach field from either its side or its middle outlet fittings and connection sizes, as well as for the tank’s outlet connection sizes. Closed end boots, such as Polylok IV, are utilized for the tank’s penetrations because they provide a flexible and waterproof connection to the pipe that enters and exits the precast construction.

A Residential Waste Management System

A.J. Foss can provide advice for septic tank needs because they are a trusted leader in the septic tank manufacturing industry. Each product type, including tank ready septic tank accessories and customized choices, is well-known to our septic tank specialists, who have access to all of the most common forms of septic systems available. As an added bonus, we provide an unparalleled tank guarantee, giving clients the confidence that every durable, one-piece tank manufactured by A.J. Foss is engineered to avoid tank failures and provide long-lasting, low-maintenance service.

1500 Gallon Monolithic Septic Tank Details
Tank dimensions 10’10” x 5’7” x 5’8”
Number of bedrooms supported 5
Pre-assembled Yes
Ideal for high water table Yes
Average retail cost $1590
Number of covers (lids) 2
Can come in traffic rated (H20) capacity Yes
Concrete strength 5,000 PSI
What are its gallons per vertical inch 31
Weight 12,500 lbs.
Fiber reinforced Yes
Number of inlets boots (Up to schedule 40pipe can slide through) 3
Height of Inlet from bottom of tank to bottom of pipe 56”
Number of outlets boots (Up to schedule 40 pipe can slide through) 3
Height of outlet from bottom of tank to bottom of pipe 53”
Required height of inlet baffle (20% of liquid level) 10”
Required height of outlet baffle (40% of liquid level) 20”

Frequently Asked Questions

In response to your question, the typical retail price for a 1500 gallon precast concrete septic tank is $1,590.

How many bedrooms does a 1500 gallon septic tank support?

The answer is that in New Hampshire, a 1500 gallon septic tank may sustain a home with up to five bedrooms.

Are one compartment tanks ideal for properties with high water tables?

Yes. Ideal for high water table scenarios, you should go for a monolithic septic tank, which is a one compartment septic tank with the seam located right at the very top of the septic tank. This is a popular choice for houses with high water tables since the liquid is contained below the lid, preventing any leakage into or out of the building.

How much does a 1500 gallon concrete septic tank weigh?

We transport our 1500 gallon tanks at roughly 12,500 lbs, although the weight of precast tanks varies significantly from manufacturer to manufacturer based on the size, wall thickness, floortop thickness, and reinforcing bars used. Precast septic tank with a loading capacity of 1500 H-10 is ready for delivery.

Can you drive over a 1500 gallon concrete septic tank?

It is dependent on the design rating of the septic tank. We provide tanks in three different versions of tank description and design ratings: Loading the H-10 Walking traffic is permitted on precast concrete septic tanks that have 300 pounds of live load per square foot and a burial depth of three feet. HD is appropriate for burial depths of up to 5 feet. H-20 is appropriate for drive-over traffic and burial depths of up to 6 feet in the ground.

Can you install a 1500 gallon concrete one compartment septic tank in one piece?

Yes, we have the ability to build 1500 gallon low profile septic tanks in a single piece of equipment. The trucks and cranes we use to carry septic tanks are capable of setting even big tanks (up to a 1750 gallon tank) in one piece.

In addition, because these concrete precast tanks are delivered in a single piece, the time required for installation of your concrete septic tank delivery is significantly decreased.

When is septic tank installation of a tank above ground appropriate?

Yes, we have the ability to build 1500 gallon low profile septic tanks in a single piece of machinery. The trucks and cranes we use to carry septic tanks are capable of setting even big tanks (up to a 1750-gallon tank) in one piece, if necessary. In addition, because these concrete precast tanks are delivered in a single piece, the time required for installation of your concrete septic tank is minimized.

Features/Details*

  • A 1500-gallon septic tank is utilized in systems with five bedrooms. It is also employed as a pump station. Grease traps are commonly seen in the following sizes: It is shipped pre-assembled to make installation as simple as possible
  • Tank with a top seam for usage in high water table locations or in situations where avoiding water penetration is essential.

* Standards for the state of New Hampshire are displayed; click here for information on other states’ specifications. You might also be interested in these widely used precast concrete septic tanks if you like what you see.

  • The following sizes are available: 1000 gallon, 1250 gallon, and 1250 gallon Monolithic
  • 1600 gallon, 1600 gallon Monolithic
  • 2000 gallon, and 2000 gallon Monolithic
  • Precast Concrete Septic Tank, and 2000 gallon Monolithic
  • Precast Concrete Septic Tank, and 2000 gallon Mono Precast Concrete Septic Tank – 1025/275 Gallons
  • Precast Concrete Septic Tank – 1250/350 Gallons
  • Precast Concrete Septic Tank – 1250/350 Gallons Monolithic
  • Precast Concrete Septic Tank – 1250/500 Gallons
  • Precast Concrete Septic Tank – 1500/500 Gallons Monolithic

a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.

How much does a plastic septic tank cost?

Asked in the following category: General The most recent update was made on March 8, 2020. Listed below are some samples of the typical cost of septic tanks: A plastic septic tank that holds between 750 and 1,500 gallons costs $500 to $1,500 depending on size. 750-3,000-gallon concrete septic tanks cost between $1,300 and $5,000 to install and maintain. a period of 40 years Aside from that, what is the cost of a 3000 gallon septic tank? Septic tank costs can range from as little as $600 to as much as $1,500.

  1. Concrete septic tanks ranging in size from 750 to 3,000 liters cost between $1,300 and $5,000.
  2. Advantages.
  3. They are far lighter in weight than concrete septic tanks, making them significantly easier to construct.
  4. What is the approximate cost of installing a new septic tank?

1500 Gallon Plastic Septic Tank Norwesco 41760

  • The question was submitted to the category of General. The most recent update was made on March 8th, 2020. Some samples of the typical cost of septic tanks are as follows: A plastic septic tank that holds between 750 and 1,500 gallons costs $500 to $1,500 depending on the size. 750-3,000-gallon concrete septic tanks cost between $1,300 and $5,000 to install. Years of service: 40 Also, what is the cost of a 3000 gallon septic tank? Septic tank costs can range from as little as $600 to as much as $1,500 per tank. A plastic septic tank that holds between 750 and 1,500 liters costs between $500 and $1500. 750-3,000-gallon concrete septic tanks cost between $1,300 and $5,000 to install. What about plastic septic tanks? Do they work as well as they are advertised? Advantages. In addition to being waterproof, plastic septic tanks are also entirely corrosion-resistant. Compared to concrete septic tanks, they are significantly lighter, making installation significantly simpler. The durability of concrete septic tanks is exceptional, and they may endure for several decades provided they are properly cared for and maintained. To acquire a new septic tank, how much does it cost? When building a three-bedroom house on a level site in good soil, the cost of a typical gravity trench system (bottom left) might vary significantly depending on where you reside, but it should be generally between $7,500 and $10,000.

Important Note: Tank must be left 1/4 full at all times including installation.

Part IAPMO Ships from
41760 No MN. OH. GA. OK. UT. NY. WA
41761 Yes CA

Disclaimer: This tank is intended for usage below ground only.

State RequirementsApprovals

The tank is exclusively intended for usage below ground.

Septic Tank Standards:

  • Molded in a rotational motion. one-piece. seamless. tank that is completely waterproof
  • Polyethylene is unaffected by the compounds found in soil. gaseous sewage
  • Tanks made of polyethylene will not rust or corrode. Strict quality standards guarantee that the septic tank is safe for the environment. Connections to the plumbing system according to Schedule 40
  • Standard plumbing is something that all area installers or professionals are familiar with. Extensions for the risers are not included. Excellent shipping item that is virtually unbreakable.

Frequently Asked Septic Tank Questions

  • 1. Is it possible to place a septic tank beneath a driveway? In most cases, it is not authorized to place the plastic septic tank beneath a driveway, and doing so will invalidate the guarantee. Keep tanks out of the line of heavy and vehicle traffic regions, and don’t put them beneath driveways. 2. Is a sand/gravel mixture, usually referred to as “pea gravel,” suitable for bedding/backfill? Yes, a sand/gravel mixture, generally referred to as “pea gravel,” is suggested for bedding/backfill. (Please refer to the installation instructions above.) 3. Is it possible to utilize a septic tank above ground? Underground plastic septic tanks are intended for use solely below ground. They are not intended for above ground usage. The use of above-ground storage tanks may result in the tank’s distortion and degradation. When compared to underground storage tanks, it is significantly more cost-effective to employ an above-ground storage tank that has been particularly constructed for above-ground uses. 4. Can hot water be held in plastic septic tanks? Yes, but only if the water temperature in the tank does not exceed 100 degrees Fahrenheit. The maximum storage temperature for polyethylene storage tanks is 120 degrees Fahrenheit. Contents that have been exposed to temperatures in excess of 120 degrees Fahrenheit, even for a brief period of time. can cause structural integrity of the tank to be compromised, making it more prone to deformation and collapse
  • 5. How do you gain access to underground plastic septic tanks? Each underground plastic septic tank is supplied with manhole access hatches, which allow you to gain access to the tank (1 or 2 depending on tank). Additionally, risers can be placed to the top of the tank to provide for access from the ground level. A riser would save you from having to dig up the dirt above the manway in order to get access
  • Otherwise, 6. Is it possible to pick up a plastic septic tank in the area? In most circumstances, yes. You must place an order in advance in order to pick up a plastic septic tank and save on shipping costs. When you receive notification that your tank is available for pickup. Plastic-mart will offer you with a six-digit trip number that will allow you to visit them and pick up your tank Monday through Friday from 8:30 a.m. to 2:00 p.m. Plastic-mart and the local producers are grateful for the chance to provide local pick-up as well as the collaboration necessary to ensure that the process is as efficient as possible.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

The two types of systems covered in this book are aerobic and anaerobic systems. This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,743
Typical Range $3,157 – $10,367
Low End – High End $450 – $20,000

The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.

New Septic System Cost

Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:

  • Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
  • Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
  • Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield.

It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems. After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Replacement of a tank lid costs between $30 and $70. Drain Field Replacement Cost: $7,500. When replacing an aerobic system, talk to your service expert about the advantages, disadvantages, and expenses of upgrading to a more efficient aerobic system.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades.

It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs. In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.

If these bacteria are discovered in your vicinity, you should investigate your septic system to determine if it is the cause. Old age: If your septic system has reached the end of its useful life, it is time to replace it.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?

Leave a Comment

Your email address will not be published. Required fields are marked *