How Large Is Septic Tank Pumping Hose? (TOP 5 Tips)

The pump prices include pumping out of a 1,000 gallon or less septic tank (or) 1,500 gallon or less septic tank, up to 18 inches of digging, 50 feet of hose and normal levels of sludge and solids.

  • Each hose is 35 feet. Hicks Septic performs a wide array of septic system services, including: Septic Tank Pumping

How far can septic pump truck reach?

Many septic pumper trucks carry a shorter length but certainly there are septic pumping companies offering pumping services advertising that they can reach up to 200 feet from the truck.

What kind of pump do I need to pump out my septic tank?

Effluent pumps are typically used to pump grey-water from a septic tank to a leach field. For raw sewage, a sewage pump or grinder pump is recommended to prevent clogging from handling solids larger than 3/4″ in width.

How big is a septic pump truck?

Septic Trucks Tank sizes range from 300 gallons, and as large as 5500 gallons.

Do you pump both sides of a septic tank?

Have your pumper pump both compartments of the septic tank. These are commonly called the “inlet” and “oulet” sides of the tank. While the inlet is absolutely necessary, the oulet is also good to have pumped.

Should you tip septic pumper?

Any insight appreciated. You should give an extra $50. in THANKS to your septic pumping company for being impeccably honest and working with your own interest in mind. What your septic pumper told you: (it’s not necessary to “re-fill” a septic tank after pumping) is absolutely correct.

How often should a 1000 gallon septic tank be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How big of a sewage pump do I need?

Q. What size sewage pump do I need? A home sewage pump must have the capacity to handle 2-inch solids. Beyond that, most homes need a ½-horsepower sewage pump that can pump about 5,000 gallons per hour to the height of the main sewage line or septic tank.

Can you pump a septic tank yourself?

Technically, you can clean a septic tank yourself. However, professionals do not recommend that you do so. A professional has the tools needed to properly pump your tank. A professional also has the knowledge and training to remove all of the waste from your tank and dispose of it properly.

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

  1. Pooling water.
  2. Slow drains.
  3. Odours.
  4. An overly healthy lawn.
  5. Sewer backup.
  6. Gurgling Pipes.
  7. Trouble Flushing.

How much does a full septic truck weigh?

With a 1,900-gallon tank, a septic truck will weigh in at around 28,000 pounds when completely filled.

How many gallons can a vac truck hold?

Commercial vacuum trucks which collect fecal sludge usually have a volume of 10–55 cubic metres (350–1,940 cu ft). However various smaller versions for specialized applications or low-resource settings can be found with tanks as small as 500 litres (110 imp gal; 130 US gal ).

What are poop trucks called?

A honeywagon is the slang term for a “vacuum truck” for collecting and carrying human excreta. These vehicles may be used to empty the sewage tanks of buildings, aircraft lavatories, passenger train toilets and at campgrounds and marinas as well as portable toilets.

Can you flush the toilet when the septic is being pumped?

You can save time and money by taking a few daily precautions that reduce the frequency of pump-outs your system will need: To flush or not to flush — Aside from wastewater, toilet paper is the only other thing that should be flushed.

What to do after pumping a septic tank?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

  1. 1) Get on a Schedule.
  2. 2) Take Care of the System.
  3. 3) Know the Parts of Your System.
  4. 4) Check Other Possible Issues.

How do I prepare my septic tank for pumping?

3 Ways to Prepare for Septic Tank Pumping

  1. Keep a Record of Septic Tank Maintenance. We recommend you keep track of all septic tank maintenance, service, and repairs that have been conducted since you’ve lived in the home.
  2. Locate System Components.
  3. Clear Away All Debris.
  4. Choose Curt & Jerry for Septic Tank Pumping.


To begin, identify the location of your septic tank. If we don’t know where your septic tank is, we won’t be able to pump it. As a result, when scheduling service, be as specific as possible about where your tank is located. If you are present when we arrive to pump out your septic tank, please direct our pumper to the exact location of the tank. Especially critical if this is our first time working on your property. How can I know where my septic tank is, though, if I have no idea where it is?

It’s not something to be ashamed of at all.

Our professionals are well-equipped to locate your septic tank, thanks to the use of cutting-edge electronic locators.


  1. We must remove the cover from your septic tank and pump the waste out of the tank through an access point in order to remove it from the property.
  2. Inquire with us if the lids of your septic tank are being blocked by anything, such as dirt, a deck, or a sidewalk.
  3. You must dig up your septic tank lids if they are buried in order for us to have access to your tank.
  4. Inquire with us about building a riser so that you won’t have to dig up your lids every time your tank has to be emptied out again.
  5. The distance between your driveway and septic tank should be measured as well.
  6. If your tank is more than 150 feet away from a safe parking area in your driveway or on the road, you must notify us so that we can carry additional lengths of hose to your location.
  7. 4.
  8. Is your septic system backed up into your home?
  9. Please notify us if you are experiencing any difficulties with your septic system.

Many common problems may be resolved by pumping the septic tank, but certain difficulties need additional investigation. As much information as possible when scheduling service will assist our professionals in assessing the situation and arriving at your home fully equipped to tackle the problem.

Septic Pumper Truck Operating Procedures: Septic Tank Pumping Procedure

  • Determine where your septic tank is located. Unless we know exactly where your septic tank is, we cannot pump it. When scheduling service, make every effort to clearly describe the location of your tank. Please direct our septic tank pumper to the precise location of your septic tank if you are home when we arrive to pump it. This is especially crucial if this is our first time working on your property. How can I know where my septic tank is, though, if I have no idea? It is not need to be concerned. The situation is in no way embarrassing. Please notify us so that we may supply the appropriate equipment to assist you with your location needs. Our professionals are well-equipped to locate your septic tank since they use state-of-the-art electronic locators. Consider making extensive notes or perhaps a drawing of your sewage system once you’ve determined where your tank is located. 2. Check to see if the septic tank’s lid is easily opened and shut. If you have a septic tank, we must remove its lid and pump waste out of the tank through a port that has been installed. A minimum of 18 inches in diameter is required for this access point so that our pumper may move the hose around to remove all of the sediments from the tank as quickly as possible. Inquire with us if the lids of your septic tank are obscured by anything, such as soil, a deck, or a sidewalk. For the most part, it is usual for the lids of sewer tanks to be buried in earth, ranging from few inches to several feet deep. You must dig up your septic tank lids if they are buried in order for us to have access to your system. Let us know when you plan to come so that we can allocate adequate time and bring the necessary tools to uncover your lids if you are unable to dig them up on their own. Inquire with us about building a riser so that you won’t have to dig up your lids every time your tank has to be pumped. A riser pipe raises the access port of your tank to the surface of the earth, allowing it to be reached without the need for digging. The distance between your driveway and septic tank should be measured as follows: Due to the fact that our trucks are equipped with roughly 150 feet of hose, we must be able to park within 150 feet of your tank. If your tank is more than 150 feet away from a safe parking area in your driveway or on the side of the road, you must notify us so that we can carry additional lengths of hose to your location. Keep automobiles and other obstructions off of your driveway, trim the thick grass around your tank, shovel snow and de-ice your driveway in the winter, and notify us if there are any low hanging wires or tree branches in your driveway. In the event that you are experiencing septic system issues, please notify us. Your septic tank is overflowing and leaking into your home. There is a puddle in your yard, do you know where it is. In the event that you are experiencing difficulties with your septic system, please let us know immediately. Many common problems may be resolved by pumping the septic tank, but certain difficulties will need more investigation and treatment. You will assist our personnel in assessing the situation and arriving to your house prepared to remedy it if you provide as much details as possible when you arrange service.

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. The septic pumper truck is operated as follows: This paper covers the stages involved in the operation of a septic pumper truck during septic tank cleaning and maintenance. In this section, we describe how the septic pumper truck operator should open the septic tank, place the vacuum lines, check the septic truck vacuum pump for proper operation before beginning the pumpout, the normal vacuum levels in the system during septic tank pumping, listen for jamming of the septic vacuum pump during pumping, connect the vacuum hoses to the pumper truck, and start the septic tank vacuuming procedure.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

Septic Tank Pumper Truck Operation Procedures

Conflicts of interest are not tolerated at No affiliation exists between us and any sponsors, products, or services mentioned on this website. Septic pumper truck operation is as follows: Septic pumper truck operation is described in detail in this paper during septic tank cleaning and maintenance. We describe the steps taken by the septic pumper truck operator in opening the septic tank, placing the vacuum lines, checking the septic truck vacuum pump for proper operation before beginning the pumpout, the normal vacuum levels in the system during septic tank pumping, listening for jamming of the septic vacuum pump during pumping, connecting the vacuum hoses to the pumper truck, and starting the septic tank vacuuming procedure.

There is an article index for this topic available as well, or you can use the page top or bottom navigation options.

A Photographic Step by Step Guide to Pumping or Cleaning a Septic Tank

In order to properly place the septic tank pumping lines or execute any other tasks with the septic pumping truck, the operator must first find the septic tank and remove the cover from its enclosure (discussed above.) Immediately after opening the septic tank, an initial step is taken to begin breaking up the septic tank’s floating scum layer and settled sludge layer. This activity is depicted in the photo here. The septic pumper operator is in charge of laying out the pumping vacuum lines that will transport waste from the tank to the septic tank.

  1. The vacuum pump assembly on the septic pumper truck is seen in these images.
  2. The vacuum pump must be turned on before the pumper hose can be connected to the truck’s transfer tank, as part of the preparation process.
  3. While driving, the operator pays attention to the truck’s vacuum pump motor to ensure that it is running properly.
  4. Having verified that the vacuum pump is running properly, we can proceed to remove the pumper truck’s tank valve cover as well as connect the vacuum line to the pumper truck.
  5. The operator is shown in the second shot to the right, hooking the first length of septic tank pumping hose to the tank truck in the third photo to the right.
  6. The first piece of the vacuum line has already been connected to the pumper truck.

Keep an eye out for the operator in these photographs, since he is not wearing personal eye protection equipment or a protective apron. Those who are suggested to guard against the dangers of sewage pollutant splash-back are those who are not.

Where to Buy Septic Pumper Trucks, Vacuum Pumping Trucks, other Septic System ServiceInstallation EquipmentSupplies

  • A new vacuum service vehicle for servicing septic systems or portable toilets is being manufactured by KeevAC, which is headed by Kevin Keegan and can be reached at 866-789-9440. In addition, vacuum pumps, hoses, and other sanitation accessories are available from the firm. American vacuum manufacturer National Vacuum Equipment is located at 2707 Aero-Park Dr. in Traverse City, Michigan 49686. Their phone number is 800-253-5500, and their email address is [email protected]. National Vacuum Equipment is a vacuum equipment company based in the United States. NVE Challenger pumps and Battioni Pagani rotary vane pumps are among the products that the company distributes. The company also manufactures vacuum blowers and high-capacity vacuum pumps as well as air assist vacuum pumping systems and valves for vacuum systems, as well as custom-fabricated vacuum products. This organization provided assistance with our story. PUMPER TRUCK VACUUM PUMPS
  • The Sanitation Journal is an industry journal that features portable restrooms and septic pumper trucks for sale in its classified ads section. There is a list and description of vacuum trucks as well as portable toilet/restroom service vehicles. The website lists septic pumper trucks for sale under the category “Vacuum Equipment Septic,” as well as vacuum excavators, jetters, and portable toilet service equipment
  • Wastequip provides vacuum trucks and vacuum equipment, as well as hydro trenchers and portable toilet trucks
  • And provides septic pumper trucks for sale under the category “Vacuum Equipment Septic.” See if any other septic service firms in your area have equipment for sale by calling their phone numbers listed in your local phone book.
See also:  What Happens When You Remove The Baffle On A Septic Tank? (Solved)

Reader CommentsQ A

Chris In the absence of more information The driver of the septic tank pumper truck is doing something on his lawn, and I have no idea what it is. It’s possible that he’s merely warming up the truck engine. Of course, if you saw pumper lines from his vehicle attached to anything, such as a public sewer, that would be a cause for worry as well. Septic tank trucks are driven by the gentleman across the street. Every day, he parks his truck in his driveway and starts it. What exactly is he doing?

Herman Thank you for your insightful inquiry.

As a result, the pumping operation is only capable of completing the “easy” part of the job and is likely to leave a significant volume of solids in the tank – which is unfortunate because it is precisely the removal of these solids – the floating scum and settled sludge solids – that is the primary goal of pumping out a septic tank in the first place.

  1. 4” Purchase Orders and the Policy Governing Them We’re sorry, but we are unable to deliver the product or service that you requested.
  2. There are no items and no services.
  3. In order to provide our readers with the full assurance that we write and report without bias, we do not sell any products and do not have any commercial or financial connections that may result in such conflicts of interest in the future.
  4. Please provide me with an estimate on how much it would cost to install a Vactor EXB-198 pumper hose on my Universal H-12 vactor truck, if at all possible.
  5. If you wanted to remove waste oil, you would surely not utilize a septic pumper truck.
  6. Furthermore, you would not want to combine waste oil with septage or sewage waste.
  7. Is it possible to utilize a pump truck to collect waste oil from restaurants?
  8. Additionally, the licensing requirements to own and operate a septic pumper truck and a septic tank cleaning firm differ from municipality to municipality, but in general an operating permit granted by the local department of health or comparable body is necessary.
  9. SEPTIC TANK PUMPERS AND CHEMICAL TOILET OPERATORS MUST COMPLY WITH SPECIFICATIONS Environmental Health Division of SContra Costa Health Services is located at 2120 Diamond Blvd., Suite 200, Concord, CA 94520 and can be reached at (925) 692-2500.

obtained on 2019/1-0/15 from website source at the time of publication: Where do all of these cleaning trucks go to get refilled? In order to drive a pumper truck, what type of license do I require? Any medium-sized vacuum truck would be quite beneficial.


(February 13th, 2014) Anonymous said: Dear Sir, we need to get in touch with you since we are interested in purchasing some of your products. Here is our phone number.


As an anonymous observer pointed out, InspectApedia does not sell any products or services in order to maintain the confidence of our readers. Check the CitationsReferences section at the end of each article, including this one, and you will discover references to companies and sources that can aid you in your endeavors. If you want to see the specifics, you’ll need to click on the “Click to Show or Hide CitationsReferences” button. Please do not write us an email or contact us in an effort to make a transaction.

Question: costs involved in septic pumping or pumping equipment

(February 2, 2014) Anonymous asked: What is the cost of this service?


Anon I’m not sure what you’re asking for: the cost of a septic tank pump ($100 to $200) (which fluctuates considerably depending on location and municipal regulations on sewage disposal), or the cost of a septic pumper truck ($50,000 and above, used).

Question: how far can the tank be from the pumper truck

(9th of May, 2015) Michael inquired as to how long the hoses used to pump out septic tanks are expected to last. My tank is around two hundred feet from the road.


Michael: Septic pumper trucks are typically shorter in length, although there are some businesses who advertise that they can reach up to 200 feet from the truck while performing pumping services. Maintain the understanding that not only must the entire pumper truck hose length account for the horizontal distance, but it must account for the vertical lengths as well, from the ground level into the septic pumper truck tank and from ground level to the bottom of the septic tank. On a dead flat site, I’d recommend increasing the horizontal distance between the pumper truck connection and the septic tank cleanout lid by another 13 feet.

Continue reading atPUMPING the SEPTIC TANK, or choose a topic from the closely-related articles listed below, or see the completeARTICLE INDEX for further information.

Septic Pumping ProcedurePumper Truck Operation Articles

  • Why should you pump your septic tank? What is the schedule for pumping? What is the safety of your septic tank?

Suggested citation for this web page

PROCEDURE FOR OPERATION OF A PUMPER TRUCKatInspect An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Alternatively, have a look at this.


Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things.

Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Please use the search box just below, or, if you prefer, you may make a question or remark in theCommentsbox below and we will react as soon as we can. Thanks for visiting! InspectApedia is a website that allows you to search for information. Please keep in mind that the publication of your Comment below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your posting will appear when it has been reviewed by a moderator. Excuse the delay in getting back to you!

Pumping Septic tank – Questions

We encourage you to use the search box just below, or if you prefer, you may write a question or remark in theCommentsbox below, and we will react as soon as we can. Look through the InspectApedia website. Nota Bene: If you include a picture, a web link, or language that seems to the program as if it may be a web link, the display of your remark below may be delayed until it has been reviewed by a moderator. We sincerely apologize for the delay.

The Working End of the Hose

Receive articles, stories, and videos about trucks delivered directly to your email! Now is the time to sign up. Trucks+ Receive Notifications Pumper Discussion, an email-based forum for industry experts sponsored by COLE Publishing, is the subject of this feature in Pumper. It reports on interesting talks that take place in Pumper Discussion. Septic and drainfield installation and maintenance, trucks and equipment, portable sanitation, chemicals and additives are some of the topics covered in Pumper Discussion, as well as the sharing of knowledge and ideas.

The information and advice provided in Overheard Online is provided in good faith by industry professionals.


I’m putting up a vacuum truck in New Zealand, and I’m curious as to what you put on the end of the hose and into your holding tank. I’ve seen one design that makes use of a length of aluminum tubing, but I’m not sure how it’s connected to the camlock fitting with that design. I’m also interested in purchasing a Crust Buster, however the cost of shipping and the current currency rate will make this an expensive buy for me. Any suggestions would be much appreciated.


Is it a regular pump truck or a vacuum loader that you’re referring to? We inserted the vacuum hose straight into the tank of the vacuum truck. I’m not aware of anyone in my immediate vicinity who uses an aluminum hose attachment. Normally, vacuum loaders are the only machines that can do this, but it wouldn’t hurt to use it on a vacuum truck as well. The only attachment I’m familiar with is the Power Booster, which requires the use of an air hookup from the truck to function.


I make use of a piece of ABS pipe that is about 4 or 5 feet in length. I attach it with camlock fittings, which are available at any hardware store. This helps to keep the end of the hose clean and allows me to direct it more readily where I want it. This approach has been in use for more than 30 years. In addition, we utilize a 3-inch PVC pipe that is approximately 4 feet long and is joined using a camlock. It performs admirably. Septic tank pumping using the Crust Buster is one of the finest purchases I’ve made in terms of equipment.

Do I require a more powerful pump?

I’d want to update to something that is more responsive.

I realize that increasing the cfm simply accelerates the time it takes to reach maximum vacuum.

You have to battle it, but my 15-inch Hg pump is capable of doing it currently. While I understand that 300-350 cfm at 24 inches Hg would be sufficient, this is like to hammering a nail with an 8-pound sledgehammer. I’d like to hear from people who are now employed as pumpers.


Whether this will help or not, we have a 2,500-gallon tank with a 350 cfm pump, which we think will be helpful. It appears to be in working order. The truck slows down while pulling long or steep distances, and you must mix some air with the septage or you will be stuck on the work all day. If we had to do it all over again, we would use a bigger cfm pump and, more than likely, a water-cooled system.


I’m not sure whether this would help address your queries, but we have a 2,500-gallon tank with an air-cooled 350-cfm pump on site. All is well with the system. The truck slows down while pulling long or steep distances, and you must blend some air into the septage or you will be stuck on the work all day. It is probable that we would use a bigger cfm pump and that it would be water-cooled if we were to do it over again.

Questions to Ask When Getting Your Septic Tank Cleaned

Published onHiring a professional to clean your septic tank can be difficult, especially if you’re not aware what to look for or which questions to ask while making your selection. When you have concerns about your septic system, a reputable provider will always answer them and be prepared to guide you through any facet of it.

Operation, insurancelicensing

In general, the longer a company has been in business and has been pumping septic tanks, the more experience and knowledge you will receive from the service you are receiving. For referrals, consult with your circle of friends, family, and neighbors.

Does the company carry General Liability and Workers Compensation Insurance?

These insurance policies protect you, the homeowner, from being held liable in the event that a company employee is injured on your property while on your property.

Is the company registered with the TCEQ and SAWS for hauling wastewater?

Check with the Texas Commission on Environmental Quality and the San Antonio Water System to check if the firm is registered with both organizations (or whichever local system you are a part of). Licenses such as these demonstrate that the organization is trustworthy and that it disposes of garbage in a lawful and safe manner. You, as the waste creator, have the ultimate duty for the correct disposal of the trash you generate. It is mandatory that the business who pumped your tank give you with documentation proving that your trash was correctly and safely disposed of after it has been properly disposed of


Since 1987, the majority of tanks have been constructed with two lids, which need digging in order to adequately clean both sections of the tank. The lids are dug up, and more hoses are charged if they are required to utilize them. Some firms just pump out one of the compartments and demand additional fees for digging up the lids and other fees for using extra hoses.

Does the price include dumping fees?

Some firms impose an extra fee or charge separately for disposal.

See also:  What Does Cornmeal Do To The Septic Tank? (TOP 5 Tips)

Does the price include any additional time on site due to locating the tank or a tank with very heavy sludge?

It should take less than an hour to clean a typical septic tank; however, additional costs may apply if the tank is difficult to detect, dug deeper than usual, or contains excessive amounts of sludge. Before hiring a business to pump your tank, make sure you are informed of any additional fees that may apply.

Do they accept credit cards?

Some businesses only take checks or cash as payment.


The most frequent ways for locating a tank are the use of a probe and a metal detector, both of which are available.

However, if locating a tank is difficult, or if it is suspected that the tank may be hidden beneath a deck, patio, driveway, or other structure, a flushable electronic locator can be used to assist in locating the tank.

Are their hoses long enough to reach the tank without driving over your lawn?

A vacuum truck with a longer hose can generally pump the tank from the street or your driveway, rather than having to drive on your grass to get straight up to the tank as is necessary with a smaller vacuum truck.

Do they carry extra lids on the truck in case yours breaks?

A small number of lids are not manufactured with adequate support, and therefore shatter easily when they are removed. Some lids are permanently attached to the tank and must be torn off in order to be removed. In cases when a cracked or broken lid poses a concern to public safety, the lid should be replaced.

Do they check the inside of the tank for baffles, walls, cracks, leaks, roots, etc.?

The pumper should inspect your tank every time it is cleaned to ensure that there are no issues.

Do they pump the tank though the tank lid(s) or the cleanout?

Only by opening and closing the tank lid can proper cleaning be done (s).

Do they wash out the tank after it is pumped?

It is necessary to remove both the sediments and liquids from the tank, after which the tank should be thoroughly cleaned with water. Some firms will simply collect the liquids and leave the sediments in your tank, while others will collect both.

Will they remind you the next time your tank should be cleaned?

A method for reminding you to pump out your septic tank every 3-5 years should be in place if your company maintains detailed pumping data.

We are septic experts

Van Delden Wastewater Systems has been in the family since 1937 and is still family owned and run. We pump nearly 2,000 tanks every year, and our knowledge and experience are unsurpassed. Our pumpers have received extensive training and experience. We pump septic tanks in the proper manner, every single time. Because our pumpers are not paid on commission, we will never try to upsell you on something you don’t require. We inspect the interior of the tank on a regular basis for baffles, roots, walls, leaks, backups, and other issues, and we keep correct records so that we can remind our clients when it is time to have their tank cleaned once again.

For the safety of our consumers, we have general liability and workers’ compensation insurance.

We would be delighted to be of service to you.

We can assist you with any of your wastewater system needs, and our specialists can also assist you with your septic installation and maintenance requirements: 210.698.2000 (San Antonio) or 830.249.4000 (Austin) (Boerne).

Feaured Markets – Hoses, Fittings and Couplings

Introducing the Eagle Honey Bee Wastewater Suction Hose, the latest addition to our extensive line ofSuction Hoses that includes plastic, PVC, rubber, EPDM, and NBR, as well as bulk and custom hose assemblies and assemblies in bulk. Recent customer demand, as well as our expanding presence in the LiquidWaste Management business, has encouraged us to expand our already broad array of suction hose, hose assemblies, and accessories even further. In addition to our suction hose, we also have a full variety of fast detach camlocks, valves, strainers, and other accessories.

The most effective approach to ensure that you acquire the appropriate Suction Hose accessories for your application is to consult with one of our knowledgeable hose professionals beforehand.

Only the best from JGB will keep your vacuum trucks and pumps functioning at peak performance. JGB Enterprises continues to provide the high-quality hose products that you have come to expect!

Rubber Suction Hose

In the search for a heavy-duty water suction and discharge hose, the rubber suction hose is essential. Rubber hoses have a supple design that makes navigating in any environment a breeze. When floods and other surplus liquids become a nuisance, JGB Enterprises has the solution for you in the form of our rubber suction hose line. We provide the solidity in our hoses that you require while also maintaining excellent flexibility in both cold and hot weather conditions. The mildew and absorption that may develop with conventional hoses are not a problem with our hoses.

JGB Enterprises continues to provide the high-quality hose products that you have come to expect.

PVC Suction Hose

Our PVC Suction Hoseprovides the support and stability you want when working on the job site. Designed to be lightweight and very flexible, Eagle Green/Clear PVC hose has a smooth bore inner and outer surface, an ellipse-shaped helix that provides strength without adding thickness, and a vacuum rating of 29 in/HG. It also has a smooth bore inner and outer surface. Our Eagle clear provides the same fantastic advantages as our other products, but it also allows the user to monitor flow and observe where obstructions occur.

Agriculture liquid fertilizer, drain lines, irrigation lines, all types of pumps, and regular duty water suction are only a few examples of the many uses.

Our Eagle Green/Clear PVC Suction Hose is an excellent choice if you are searching for an affordable, ultra-flexible, and lightweight PVC suction hose that is also environmentally friendly.

Plastic Suction Hose

By expanding our platform in the liquid waste and septic business with the introduction of our all-new Eagle Honey Bee Suction Hose, JGB Enterprises is able to provide our clients with superior results that can only be obtained via the use of our Eagle brand hoses. The Honey Bee Wastewater suction hose demonstrates a number of key solutions that will assist you while on the job site. In addition to being crush resistant, the simple helix exterior allows for easy navigation on uneven surfaces, which helps to minimize fatigue and increase productivity.

Pumps, whether industrial or standard, residential and commercial properties, construction dewatering, and standard-duty water suction are just a few of the applications where our Eagle brandsuction hoses will improve job performance and efficiency.

JGB Enterprises continues to provide the high-quality hose products that you have come to expect. More information may be found here.

The Best Features to Have on Your Septic Tank Truck

If you own and operate a septic tank pumping business, your truck is the heart and soul of your business. In the same way that you must provide an employee with the essential equipment to do the task, you must also provide your septic tank truck with the necessary tools to operate smoothly and reliably. When you build a bespoke septic tank truck, the features and equipment you include decide how effectively you can service your unique clients and how lucrative you can be along the road. Listed below are a few of the more typical accessories and items to take into consideration when purchasing your new vacuum truck.

Features to Consider Adding to your Septic Tank Pump Truck

The first step in building the perfect customized septic vacuum truck is determining the length of your hose. Why? The length of your hose determines how near or how far you can park your vehicle while still being able to access a customer’s septic tank and pump it out. It is possible to get away with using a shorter hose and a smaller vacuum pump if accessibility is not a significant priority for your clients. However, it’s always comforting to know that you have the ability to get to difficult-to-reach spots when the situation calls for it.

Vacuum Pump Power

The one thing that is certain is that you will not be cleaning out any septic tanks if your vehicle does not have an operational vacuum pump. A frequently asked issue is what size pump is appropriate for a truck. Now, establishing the appropriate CFM in relation to your hose diameter and length, as well as the capacity of the tank, can be a hard mathematical exercise. The recovery time of the suction in your tank, as well as the amount of waste in your hose that has to be transported to the tank, are critical considerations.

As a result, it is recommended to install a pump that will provide you with the power (CFM and vacuum level) you require to handle not just the ordinary work, but also the odd challenging job that necessitates a little more vacuum power.

If you’ll be running long hoses, hauling up hills, or working on large projects, it’s important to invest in enough vacuum power to ensure that you can perform sufficiently for your customers while still maintaining a healthy profit margin.

Find Out More!

Sight Eyes, Floating Ball System, or Digital Readout

The most common and standard method of determining the level of liquid in a vacuum tank is through the use of sight eyes. The glass bubbles that are often found on the ends of a tank and which allow you to estimate how filled the tank is at any one time are known as gauges. It is possible to obtain more accurate information using a variety of standard alternative approaches. A level indicator with a float ball and dial, or a float device with a digital read, can offer more precise information about the level in the tank.

It is possible to obtain more exact data from a digital readout, which can be utilized for invoicing purposes that need correct information that can be validated.

Adding a Jetter

For cleaning drain lines, having a jetter mounted on your vehicle might be a very handy addition to your equipment collection. Roots and debris have an uncanny ability to make their way into and block drain systems. Instead of relying on luck to keep the lines clear, you may install a jetter system to ensure that you always have the correct equipment on hand when you need it. Drain line maintenance may aid in the operation of the septic system for the client while also generating additional cash and profit for your organization.

Freshwater TankPump

Septic trucks are not required to carry fresh water onboard their vehicles, but there may be compelling reasons to include a second compartment that can hold two or three hundred gallons of fresh water in an emergency situation. Fresh water may be used for a variety of tasks, from cleaning up tools and spills to providing water for jetting lines. It can also be used to assist maintain your equipment and tools, keep your customers’ driveways clean, and generate additional revenue from your pumping operation.

Consequently, equipping your vehicle with the appropriate tools for the task will not only boost your bottom line but will also minimize stress and allow you to save critical time while on the job.

would be delighted to guide you through the best configuration and tools that are appropriate for your particular business.

Septic tank cleaning and pumping – Canadian septic owners guideline 2021

A septic tank cleaning involves pumping your tank to ensure that it is thoroughly emptied of all solid and liquid contents. Cleaning your septic tank on a regular basis can assist to prevent excess scum and sludge collection, which will allow for more space for decantation to take place. Aside from that, it helps to eliminate inorganic waste that is unable to be decomposed by bacteria. In Canada, it is essential to clean your septic tank every two to three years, according to the legislation.

Due to the fact that septic tanks emit poisonous gases that are hazardous to human health, it is best to leave the cleaning of septic tanks to competent septic firms.

What are septic services?

For the time being, let us define what septic services are before getting into the specifics of septic tank cleaning. Septic services are the services that are given by septic firms to people who have septic systems. These services are as follows:

  • Septic tank installation, Septic tank repair, Septic tank cleaning, and Septic tank maintenance are all available services.

Companies such as Bio-Sol, in addition to providing these services, also provide biological solutions for mending and sustaining broken systems.

Because their products are manufactured from enzymes and bacteria, they are safe to use in septic systems.

Do septic tanks need to be cleaned out?

In Canada, it is essential to clean your septic tank every two to three years, according to the legislation. If you put off septic tank cleaning for an extended period of time, the septic system may collapse, resulting in a clog in the system’s drainage system. If your drainfield becomes clogged, it may begin to leak, causing pollution in the surrounding area. In most cases, biological additives can be used to correct the problem. However, the government has legislation against septic systems that pollute the environment, and if an inspector finds that your system is polluting the environment, they may recommend that you install a new system, which will cost you anywhere from $10,000 to $30,000 depending on the type of septic system you use.

How often should you have your septic tank pumped?

It is recommended that you clean your septic tank every 2-5 years, depending on the number of bedrooms in your home and the requirements of your local authorities and laws. Pumping periods are varied in each province in Canada, and they should be followed accordingly. According to the timetable listed in the table below, each province has its own schedule.

Province Recommended Septic tank pumping frequency
Ontario 2 years
Quebec 2 years
Nova Scotia 3-5 years
New Brunswick 2-3 years
Manitoba 3 years
British Columbia 3-5 years
Prince Edward Island 3 years
Saskatchewan 2-3 years
Alberta 3-5 years
Newfoundland and Labrador 2-4 years
See also:  How Much Does It Cost To Drain A Septic Tank Alabama? (TOP 5 Tips)

The government is quite concerned with ensuring that septic systems do not harm the environment. In order to prevent this from happening, the government has established legislative restrictions on the pumping durations stated above. The government governs this in three major ways: first, via taxation; second, through regulation; and third, through regulation.

  • A major concern for the government is that septic systems do not harm the environment. In order to prevent this from happening, the government has established statutory restrictions on the pumping intervals stated above. The government governs this in three major ways: first, via taxation
  • Second, through regulation
  • And third, through regulation of the marketplace.

Water running back into the tank from the drainfield during or after pumping indicates that the drainfield is clogged, and the pumping business should be notified immediately. To fix the problem in this situation, you could consider using a shock therapy. Otherwise, the tank may get completely refilled in a relatively short period of time.

What are the signs that your septic tank is full/due for pumping?

You should be aware of certain critical signals that indicate when it is time to pump your septic tank as a septic system owner. Here are some of the most crucial warning indicators to keep an eye out for. The clock has struck three o’clock– this is not necessarily a portent, but it is worth noting anyway. You should consider having your septic system cleaned every three to five years if you haven’t had it pumped in the previous three to five years. Pumping the tank every few years guarantees that the tank does not become overflowing, since if it does, it may begin backing up or leaking, resulting in contamination of the environment and the surrounding area.

  • This will assist you in determining whether or not your septic system is truly full.
  • Blocked drain field– a clogged drain field can be caused by a septic tank that is overflowing.
  • These include: Slow drains, tiny pools of water in your lawn, foul aromas, high nitrate concentrations in drinking water, and grass that grows greener around the drainfield region than in other parts of your land are all signs of a clogged drainfield on your property.
  • A backup can also occur when there is an excessive amount of scum in the tank, which causes the entrance line to get clogged.
  • Pollution of the environment– Almost every septic system is overworked as a result of routine use – especially when the majority of homes use compounds that are harmful to microorganisms.

Breakdown to do so may result in the failure of the system as a result. A faulty system will not only poison groundwater, but it will also pollute the surrounding ecosystem. Replacement of a septic system that is creating contamination in the environment is required under the law.

How to clean a septic tank

Pumping your septic tank should only be done by professionals who have been properly registered and licensed. Because septic tanks generate potentially harmful gases, it is best to leave tank cleaning to the professionals. The first step in cleaning a septic tank is determining where the septic tank is located. If you are unsure of the location of your septic tank, the pumping contractor will find it for you. It shouldn’t be too difficult to locate a septic tank life, though. If the septic tank lids are not visible in your yard, here are some ideas that might assist you in locating the tank.

Locate the septic tank

  • Septic tanks are typically located away from the foundation of the house, but close to where the plumbing exits the house
  • You can also locate the tank using a probe bar, though this should be avoided if your tank is made of polyethylene or fiberglass
  • You can also use a probe bar to locate the tank
  • Local authorities can also provide you with on-site sewage plans for your home if you request them. They will almost always have these on hand, and these drawings will show you exactly where your septic tank is located on your property.

Start emptying

The actual cleaning of the septic tank will begin when the location of the tank has been determined. In order to guarantee that the septic tank is completely cleaned, it is necessary to ensure that all of the liquids and solids are removed from it. The septic tank cleaning firm will have to make certain that the sludge and scum layers are dissolved and combined with the liquid in order to ensure that the solids are evacuated. In order to do this, they will begin by pumping some of the liquid out of the tank and then pouring it directly back into the tank at the bottom.

Also possible is the employment of the hose to probe and break down the solid layers into tiny particles.

Look for potential issues

Inspecting the system and taking note of certain crucial factors is what the septic tank cleaning business should do while cleaning the system.

  • If there are any traces of effluent on the land, particularly near the septic tank and drain field, the property should be evacuated. Symptoms of high liquid levels just before pumping, as well as any previous signs of high liquid levels. High liquid levels might signal that there has been a backup from the drain field. As soon as the tank is pumped, there is a backflow of liquids from the leach field back into the tank. Depending on the circumstances, this might indicate that the drain field has failed. Abnormally low liquid levels – If the liquid levels in the septic tank are abnormally low after years of typical usage, it might signal that there is a tank leak. As the septic tank is being drained out, some groundwater is being drawn into it.

Taking note of the items listed above is extremely essential because it will allow you to determine how healthy your septic system is and whether or not you need to begin thinking about septic system repair. It is important to reinstall the manhole cover cautiously once it has been completely cleaned. Any small spillages that may have occurred during the pumping process should be cleaned up with water; however, significant spillages should be disinfected, removed, and buried as soon as possible after occurring.

Which methods are used to clean a septic tank?

When it comes to cleaning septic tanks, there are two basic procedures that contractors employ: total emptying and selective emptying.

  • Complete emptying refers to the process in which the contractor totally removes all of the contents of the septic tank from the property. The trash is subsequently transported by the contractor to a septic sludge treatment facility that has been designated. It is not suggested that septic tanks be completely emptied. After pumping the tank, it is beneficial to leave a few inches of sludge at the bottom of the tank to aid in the re-institution of bacterial activity. However, there are several circumstances in which total emptying may be the best option. Holding tanks and cesspools are examples of this. Selective emptying: As the name implies, the purpose of selective emptying is to ensure that the tank is not totally depleted of all of its contents. Different contractors employ a variety of approaches to do this. Some people use a pump to remove everything from the tank and then return some of the liquid back into the tank. In order to guarantee that they only pump backwater with a residual suspended matter concentration of less than 350 mg/l, the pumped liquid is first filtered. Using a selective emptying method is considered a more environmentally friendly method of pumping the tank since it recycles part of the bacteria straight back into the tank, allowing the septic system to continue to function properly even after it has been pumped.

Where does the septic waste go after a tank cleaning?

Pumped septic waste should be disposed of at public septage disposal facilities. Septic firms often obtain approval from these institutions in advance of performing their services. If septic sludge is mistakenly dumped on an illegal location, the septic business is responsible for notifying the local environmental health authority as soon as possible. Septic spills of around 15 gallons in volume should not be removed by the septic firm without first informing the local environmental health office, according to EPA guidelines.

This is due to the possibility that hazardous elements will interfere with the wastewater treatment operations.

What options do I have if I can’t get a pumping truck to my septic tank location?

When it comes to garbage disposal, islanders face a set of issues that are specific to them. Aside from the difficulties associated with the installation of a septic system, there is also the matter of how to pump it. Septic firms on the Vancouver and Montreal Islands, as well as on other significant Canadian islands, provide a full range of septic services, ranging from septic tank installation through septic tank pumping. The smaller islands, on the other hand, do not have this choice. The health department has a barge that travels around these little islands, pumping the septic tanks as necessary.

Having a cottage in the woods limits the number of things you can do with it.

You may improve the efficiency of the system even further by employing shock treatment and upkeep solutions, such as those provided by Bio-Sol.

Is it possible to have a septic tank pumped during winter?

It is feasible to pump your tank throughout the winter, but the process is typically more difficult and expensive. There is minimal relationship between the difficulty of pumping septic tanks in the winter and the pumping equipment. The most difficult part of the process is generally getting access to your land and getting to the septic tank after the truck has finally arrived on your property. It is possible that shoveling may be necessary if there is an excessive amount of snow, which would further complicate the operation.

  • Here are two more septic issues that have been identified throughout the winter months.
  • Due to the excellent insulation provided by snow in normal conditions, the cold temperatures have little effect on the septic tank’s performance.
  • It is possible that your tank will freeze as a result of this.
  • Frozen tank components– Frozen tank components slow down the metabolic rates of anaerobic bacteria, which implies that the bacteria will not be able to fully decompose the waste in the system.
  • Water that passes through the plumping in minute droplets has a high likelihood of forming ice in the pipework.
  • Despite how tempting it may seem, do not pour antifreeze into the system since doing so would actually damage it by killing the beneficial bacteria.

Particularly important if you discover that your tank is nearly full or if your tank has not been pumped in the last 3-5 years.

How much does it cost to pump a septic tank?

Pumping your tank during the winter is doable, but it is typically more difficult and expensive. There is little relationship between the difficulty of pumping septic tanks in winter and pumping equipment. Usually, the most difficult aspect of the process is getting the truck onto your property and then getting to the septic tank once it does. It is possible that shoveling may be necessary if there is an excessive amount of snow, which would further complicate the operation. The difficulty of getting about is not the only problem during the winter months.

  • When conditions are normal, snow acts as a good insulator, preventing the septic tank from being damaged by cold temperatures.
  • As a result, your tank might get completely frozen.
  • Frozen tank components– Frozen tank components slow down the metabolic rates of anaerobic bacteria, which implies that the bacteria will not be able to fully decompose the waste produced by them.
  • Using little droplets of water to pass through the plumping might cause the pipes to freeze quickly.
  • If you are tempted to pour antifreeze into the system, refrain from doing so because doing so will actually damage the system by eliminating the beneficial bacteria.
  • Particularly important if you notice that your tank is nearly full or if your tank has not been pumped in the last 3-5 years.

Does the size of the tank matter when pumping it?

In most cases, the amount of wastewater transported to your tank from your home, the statutory restrictions for your region, and the size of the tank are the primary drivers of how frequently your tank has to be pumped. Tanks of various sizes require different amounts of pumping. Generally speaking, the smaller the tank, the more times it will need to be pumped. However, in most circumstances, the size of the tank does not matter because every province in Canada has a specified pumping period that must be followed (refer to the table above).

How biological additives optimize the tank and facilitate pumping

The amount of wastewater that is supplied to your tank from your home, the statutory restrictions for your location, and the size of the tank are the primary drivers of how often you must pump your tank.

Tanks of various sizes require different amounts of pumping, and the smaller the tank, the more the number of times it must be pumped. However, in the majority of cases, the size of the tank does not matter because every province in Canada has a recommended pumping period (refer to the table above).


To guarantee that your tank does not fail, you should examine it on a regular basis and also get it pumped as prescribed by the provincial legislation, if appropriate. If a septic tank fails, it will begin to leak, and any leaks will damage the surrounding environment. The legislation is quite stringent in this regard, and you will be required to replace a septic system that has failed to the point that it is poisoning the environment. As a result, it is in your best interests to ensure that you are aware of the suggested pumping schedule.

Leave a Comment

Your email address will not be published. Required fields are marked *