How Far From My Septic Tank Should A Jacaranda Tree Be? (Solution)

The general rule is that such a tree needs to be at least as many feet away from your septic drain field as it is tall. So a specimen 50 feet tall at maturity should stand at least 50 feet away.

  • The barrier should be at least 3 feet from the drain system so that it doesn’t interfere with operation of the system, and no closer than 5 feet to the trees. It should run the length of the drainfield to prevent roots from growing around it. Beneficial Vegetation

Do jacaranda trees have invasive roots?

Jacarandas have a vigorous root system You’ll have to be careful where you plant your jacaranda tree. While also considering space, be careful not to plant it near drains, pipes, water lines and paths, as they have a vigorous root system and can cause fungal problems if dug or mowed out.

How far do jacaranda tree roots spread?

The ultimate size of a tree’s root mass will depend upon growing conditions – soil type and watering practices – but in general terms, the Jacaranda will develop roots in the top 18-24 inches of soil and spread out nearly twice as far as the canopy is wide.

Where should you not plant a jacaranda tree?

Jacaranda trees need plenty of space Typically, a mature Jacaranda tree can be 25-50 feet tall and 15-30 feet wide. This makes Jacarandas only suitable for large backyards, parks, or streets. Planting these trees in cramped spaces will lead to inadequate and unhealthy growth.

What kind of trees can you plant near a septic tank?

Here are some example of trees and shrubs with shallow root systems that are safe to plant near your septic system:

  • Japanese Maple Trees.
  • Holly Shrubs.
  • Dogwood Trees.
  • Cherry Trees.
  • Boxwood Shrubs.
  • Eastern Redbud Trees.
  • Azalea Shrubs.

How do you keep a jacaranda tree small?

Thin the canopy to develop stronger branches, removing crossing branches and those at odd angles, but never removing more than 20 per cent of the growth. Cut just outside the branch collar and only ever in the dead of winter.

How fast does a jacaranda grow?

Jacaranda will most often grow to less than 8m tall, although it can reach 12–15m under ideal conditions, taking 20+ years to do so. Jacaranda tree foliage is a lush green with a soft, almost fern-like appearance due to the dozens of tiny leaflets that make up each compound leaf.

How much water does a jacaranda tree need?

During the spring and summer months, jacaranda should be watered slowly and deeply once every two weeks. During winter when the trees are dormant, water just once or twice. Don’t water at the base of the trunk but rather around the dripline where rain naturally falls from the outer branches.

Is there a dwarf jacaranda tree?

Jacaranda Bonsai Blue is truly unique as it is the world’s first dwarf Jacaranda. This small tree will become 30” tall and wide and has fern-like foliage and beautiful purple-blue coloured flowers. This deciduous tree is hardy to USDA Zone 9-11.

How do you shape a jacaranda tree?

It is best to prune Jacaranda in winter and we highly recommend they have a healthy pruning, at the very least, every 3 years. An arborist will use precision tools to remove dead branches as well as any crossed or lower branches to ensure the canopy is full and moves upward with the growth of the tree.

What zones do jacaranda trees grow in?

In general, jacaranda trees are a good choice for large outdoor areas in warm climates, USDA hardiness zones 10 and 11. They are resistant to pests and diseases and are moderately drought-tolerant (though they require watering during extended dry periods).

What will grow under a jacaranda tree?

If they are planted near a house or other building, position them to the north or west so they cast summer shade. Underplant as the tree grows with shade-loving clivia, azalea and bromeliads. Both the flowers and foliage of jacarandas are distinctive to look at.

Are jacaranda trees wind resistant?

The best site is probably one where the spent flowers will fall harmlessly into a lawn. The second is to avoid excessively windy locations as the wood is somewhat brittle and strong winds can cause broken branches. Other than that, Jacaranda should make a fine addition to your landscape.

How far can you plant a tree from a septic tank?

Any trees planted in your yard should be at least as far away from the septic tank as the tree is tall. For example, a 20-foot-tall tree should be planted at least 20 feet away from the septic tank. Some trees need to be located even further from a septic tank.

How far should a tree be planted from a sewer line?

Trees should be located more than 10 feet from sewer lines to minimize root intrusion.

How close can you plant a tree to a leach field?

Large trees are more likely to have extended root systems that can damage your leach field. Avoid planting beech, elm, birch, maple, willow or poplar trees close to your leach field. Never plant any tree closer than 10 feet to the edge of your leach field.

What Trees Are Safe to Plant Near a Septic Tank?

Davey utilizes cookies to make your experience as pleasant as possible by giving us with analytics that allow us to provide you with the most relevant information possible. By continuing to use this site, you acknowledge and agree to our use of third-party cookies. For additional information, please see ourPrivacy Policy. Subscribe to “The Sapling” on the Davey Blog for the most up-to-date information on how to keep your outside area in peak condition throughout the year. Septic systems, which have thick pipes that go deep throughout the yard, raise a lot of problems regarding what you may plant and where you can put it.

Landscaping Ideas Around Septic Tanks: What to Plant Over a Septic Tank

Regardless of what you’ve heard, it’s not impossible that this will happen! It is true that the correct type of plant or tree may assist the system in keeping water flowing smoothly and preventing erosion. Plants that function best have soft, green stems and are well-adapted to the amount of rain that falls in your location. In other words, we’re talking about annual plants versus perennial plants against wildflowers versus bulbs versus grass. Trees may also be used, as long as you select one with shallow roots and place it a long distance away from the tank.

Can I plant oak trees, Japanese maples or fruit trees near a septic tank?

It is possible, but it is really difficult! The roots of trees are wired to follow the flow of water. As a result, if you plant trees or bushes too close to your irrigation system, they may pry into the pipes and block them, causing harm to the system and the water flow in your home. When it comes to landscaping near the tank, the plants we described above are typically a better choice. In fact, you may cover the system with flowers like those (or even grass) to disguise the system’s presence.

Thus, white oaks and crabapples are both good choices for landscaping.

Maple trees are infamous for blocking drains and sewer lines.

Biological or viral contamination of any plants grown in close proximity to your sewage tank may be a concern.

What trees are safe to plant near a septic system?

Getting back to the original reader who sparked this discussion: because of their shallow roots, skyrocket junipers may be planted in a variety of locations. However, there is a caveat to this, as well as to all of the other options listed below. If possible, place the tree as far away from the system as the tree will be when it is completely matured.

Consequently, while skyrocket junipers normally grow to be 20 feet tall, it is recommended that they be planted at least 20 feet away from the system. The following are some more plants and shrubs to consider planting near a sewage treatment system:

  1. In zones 3-8, hemlock grows to be a beautiful evergreen that may reach heights of up to 80 feet. (Zones 3-8): An evergreen with wonderfully colored needles that may grow to be 80 feet tall
  2. It can be found in zones 3-8. Boxwood shrub (zones 4-9): An evergreen that is commonly used for hedges and grows to be around 10 feet tall
  3. It is a good choice for small gardens. Dogwood (hardiness zones 5-8): A spring-flowering tree that normally develops to be around 30 feet tall
  4. It blooms in the spring. Stunning blooming trees that grow between 30 and 50 feet tall in zones 5-8, ornamental cherries are a must-have for any garden. An added bonus is that there are several kinds and cultivars to pick from. In zones 5-9. American holly (Acer rubrum): An evergreen with vivid flashes of berries that often grows to reach around 50 feet tall
  5. It is a multi-stemmed palm that develops to be around 6 feet tall in zones 5b-11. The lady palm (zones 8-11) is a distinctive palm that may be grown to seem like a shrub and can grow to be around 10 feet tall. The pygmy date palm (zones 9-11) is a pint-sized palm that grows to approximately 12 feet tall and is extremely easy to grow.

Want a local arborist to plant your tree to keep your septic system safe? Start here.

I am having my septic tank moved to the side of my house where I have fruit trees and other plants, and I am quite excited about it. Can you tell me how far away these trees should be planted from my septic tank? A: There is a plethora of material available on the internet about the topic of the distance between trees and septic systems. I’ve seen distances as little as 20 feet (at the University of Minnesota) and as long as 100 feet (at the University of Minnesota) (North Carolina State University).

  • It is crucial to note that tree roots can develop two to three times the distance between the drip line and the trunk.
  • Let’s imagine one of the fruit tree limbs was ten feet in length, which is not out of the ordinary for fruit tree branches.
  • Those roots have the potential to interfere with the natural processes of the septic tank and cause significant harm.
  • If you need to relocate the fruit trees, do so and then replant them in a new location.
  • When you move them, try to get as much of the root ball as you possibly can.
  • It is advisable to plant them during the dormant season to ensure the health of the tree and the production of future fruit.

Growing Jacaranda Trees in Your Yard

Beautiful tropicaltree with fragrant purple panicle-shaped flowers, the jacaranda (Jacarandamimosifolia) is known for its clusters of fragrant purple panicle-shaped flowers in the spring and summer. The jacaranda branches are arched, providing a canopy that resembles an umbrella that has been flipped upside down. The jacaranda tree, with its fern-like leaves that may grow up to 20 inches in length, is a good shade (or street) tree because of its large size. In a tropical setting, it grows at a rapid rate, acquiring around ten feet per year during its first 10 years of existence.

A semi-evergreen or deciduous tree, the jacaranda tree is often planted between the months of fall and early spring, depending on where it is placed.

It is native to South America, but it has become an invasive species in many regions of the world, including the United States.

Learn How to Grow and Care for Jacaranda Trees

Common Name Jacaranda tree, black poui, blue jacaranda
Botanical Name Jacaranda mimosifoila
Family Bignoniaceae
Plant Type Flowering tree
Mature Size 25–50 ft. tall, 15–30 ft. wide
Sun Exposure Full
Soil Type Sandy, well-drained
Soil pH Neutral to acidic
Bloom Time Spring, summer
Flower Color Purple, blue-purple
Hardiness Zones 10 and 11 (USDA)
Native Area South America

Jacaranda Tree Care

The jacaranda tree, in general, is a suitable choice for wide outdoor areas in warm climes, particularly in USDA hardiness zones 10 and 11. They are resistant to pests and diseases, and they can withstand moderate drought conditions (though they require watering during extended dry periods). It is frequently able to grow grass beneath the tree because of the fern-like leaves, which allows diffuse light to filter through. However, keep in mind that the tree may have extensive surface roots that might cause damage to sidewalks or surrounding structures.

Because of its filthy tendency, the tree is a bad option for areas near pools, roads, and patios because of the cleanup required.

Despite the fact that jacaranda trees may be cultivated indoors, they normally do not produce flowers.

When planted indoors, jacarandas may become a breeding ground for aphids and whiteflies.


The jacaranda tree has an invasive growth habit in tropical climates such as Hawaii, Queensland, Australia, Chile’s Juan Fernandez Islands, Kenya, Tanzania, South Africa, and Zambia, and it is particularly prevalent in the Hawaiian Islands. It has deep roots, and it competes with other plant life, allowing just a few species to flourish beneath its canopy. It has the potential to cause seedling thickets and reduce biodiversity in a region. The Spruce / written and directed by Jayme Burrows The Spruce / written and directed by Jayme Burrows The Spruce / written and directed by Jayme Burrows The Spruce / written and directed by Jayme Burrows


Plant your jacaranda tree in full sun, where it will receive at least six to eight hours of direct sunlight every day, for the best blooming results. Jacaranda trees of a smaller size may take some mild shadow if necessary, but a lack of enough sunshine can reduce the number and brilliance of their blossoms.


The optimal conditions for jacaranda trees are well-draining, somewhat sandy soil with a pH level that is slightly acidic. In addition, it is tolerant of clay and loamy soils; nevertheless, it should not be planted in any soil composition that is regarded as heavy, damp, or poorly draining. Root rot and mushroom root rot are both more likely to occur in soil that has been saturated with water.


A good rule of thumb is to water your jacaranda tree when the top three or four inches of soil on the tree feels dry to touch. It is necessary to provide continuous hydration to these trees throughout the year, and they frequently require supplemental watering during periods of extreme heat or drought. Water the area surrounding the tree’s base to keep it healthy. Focus the majority of your watering efforts at the drip line (the point at which the water drips off the ends of the branches) rather than close to the trunk.

Watering in this manner should be repeated once a week, with frequency increasing to multiple times a week during periods of excessive sun or heat. During the tree’s dormant winter months, irrigation should be reduced to once a month.

Temperature and Humidity

Despite the fact that certain jacaranda trees can withstand occasional cold weather days (with temperatures as low as 20 degrees Fahrenheit), this species does not flourish in locations with regular freezing temperatures. This plant enjoys heat and humidity, however it is susceptible to trunk scald if exposed to high temperatures on a consistent basis.


Feed your jacaranda tree once a year with a well-balanced tree fertilizer, but avoid overfeeding it with nitrogen, which can cause blossoming to be stunted or even impossible. The fertilizer ratio of 10-10-10NPK is recommended (nitrogen-phosphorus-potassium). If you are feeding grass under a tree, it is likely that the tree is already receiving a significant amount of nitrogen.

Types of Jacaranda Tree

There are numerous significant variations of Jacaranda mimosifolia, including the following:

  • “White Christmas,” also known as Jacopo mimosifolia “Alba,” is a full-size tree with a similar habit and care requirements to other varieties
  • It can grow up to 40 feet tall and 60 feet wide with lush foliage
  • Its white blooms may appear earlier than other varieties, beginning as early as April in some climates. Jimosifolia ‘Bonsai Blue’: A dwarf cultivar with rich purple blossoms that grows only 10 to 12 feet tall and six to eight feet wide
  • It grows in USDA hardiness zones 9 through 11
  • It is a good choice for containers. Jacaranda jasminoides: A dwarf variety that grows 10 to 25 feet tall and has tubular blooms that range in color from violet to dark purple. J. jasminoides ‘Maroon’ is a dwarf cultivar that grows 10 to 25 feet tall and has dark maroon-purple blossoms
  • It is native to Mexico.
See also:  Where Can I Find A Map Of My Septic Tank? (Correct answer)

Tatters / Flickr / Creative Commons Attribution 2.0


Young jacaranda trees should be pruned to develop a single central leader (main trunk) in order to increase their strength and stability. Avoid pruning beyond this point because excessive trimming may cause the tree to develop vertical suckers, which can damage the tree’s form. Broken, dead, or diseased branches should be removed only when necessary during the season’s pruning.

Propagating Jacaranda Trees

Ideally, the seeds should be planted between the months of autumn and early spring. You may also propagate this plant by taking a stem or branch off of it and planting it (softwood). An alternative option is grafting, which is best carried out by nursery or horticulture specialists. Plants produced from softwood cuttings bloom more sooner than plants grown from seed, which makes softwood cuttings the preferred method of propagation. Furthermore, stem cutting is the most dependable way of propagation since the child plant will be an exact replica of the parent plant.

  1. Trim a branch using pruning shears or hand pruners to a diameter of 1/2 inch to one inch in diameter. Also required is either a transparent jar of water or a container of moistened soilless potting mix (including perlite) or a sandy, loamy mix. If you choose the water rooting approach, you will ultimately need a container of potting soil to plant the rooted stem
  2. Otherwise, you can use the dry rooting method. To begin, cut a branch that has grown through the bark and has healthy buds at the base of the branch. It should be cut right above a node (the point where the leaf grows from the stem). Make a diagonal incision of at least one inch in length
  3. The longer cut surface favors roots. Ideally, the cutting should be at least three to four inches long and should have at least three nodes on it. It is possible to keep the cutting in a clear glass or jar of room temperature filtered water until roots grow (approximately two weeks), after which you may plant it in potting soil or a container. Maintain a constant amount of water in the container while you wait for the roots to grow in it. Use filtered, room temperature water. Alternatively, you may just plant the cut end in an enriched, wet soilless growth medium without any additional preparation. Optionally, you can dip the cut end into rooting hormone to increase the likelihood of it producing roots. In a bright setting, but not in direct sunshine
  4. Direct sunlight has the potential to burn or dry the cutting. Using a soilless potting mix, transplant the water-rooted cutting into the ground once the roots have grown to at least one inch length. After that, you should wait at least eight months before transplanting the cuttings. Allow the plant plenty of time to establish its root system before transplanting it. Then either relocate the plant to a more permanent location outside or pot it up in a larger container—at least five gallons or more.

How to Grow Jacaranda From Seed

In the late summer, the jacaranda tree produces its fruit, which is a dry spherical brown pod that is one to three inches broad and one to three inches long. Pick the seed pods directly off the tree when they are dry to harvest theseeds for replanting in your garden (pods that have fallen to the ground might not contain seeds).

  1. Soak the seeds in water for 24 hours before using them. Place the seeds in seedling containers or pots on top of a layer of potting soil and water well. Cover them with a thin layer of potting soil and water them in regularly to keep them healthy. After sowing the seeds, they should sprout in two to eight weeks. Let the seedlings grow for eight months before transplanting them.

courtesy of VV Shots / Getty Images

Potting and Repotting Jacaranda Trees

Jars of at least five gallons in capacity must be used to plant container-grown jacaranda trees, which should be filled with a sandy loam potting mix that drains fast. While the soil should be kept damp but not soggy throughout the active growth season, the soil should be kept dry. In order to avoid damaging the plants, transplant jacarandas in the winter after the leaves fall off but before they begin to bloom in the spring. Transplanting them when they are latent decreases stress and enhances the probability of a successful transplantation outcome.

These trees may grow to be 50 feet tall in the tropics, outgrowing their pots. However, in cooler areas, they may be cultivated as container trees that grow to around eight to ten feet tall if you cut and shape the tree once a year during dormancy to keep it on the lower half of the spectrum.


Because they are tropical trees, it is unlikely that these plants would live in areas that freeze for lengthy periods of time. It can withstand a few cold snaps here and there, but much more than that is a recipe for tree death. The tree can endure occasional 20-degree Fahrenheit days with a cold snap here and there if your winter temperatures fall from time to time during the winter. Think ahead and plant the jacaranda in a sunny location that provides some protection from strong winds in order to reduce the likelihood of freezing days in the winter.

More flowers in the spring are triggered by a dry season in the fall and winter.

It is important to prune your potted plant during the dormant winter time to prevent your potted jacaranda tree from becoming overgrown.

Common Plant and Pest Diseases

Jacaranda trees are subject to attack by aphids and scale insects, and the glassy-winged sharpshooter has been known to infest the leaves of the plant. All of these pests can be controlled with the use of insecticidal soap or horticultural oil. When it comes to disease, jacaranda trees are rarely affected; nevertheless, insects such as the sharpshooter, which transmit the bacteriaXylella fastidiosa, can cause plants to suffer bacterial leaf scorch. The germs obstruct the tree’s ability to obtain the water it requires.

However, because there is no known treatment for the ailment, the tree is unlikely to survive in the long run.

This illness is caused by a widespread fungus and there is currently no effective treatment other than removing the dying plant.

When you begin to peel back the dead bark, you will find a white fungal growth on the surface.

How to Get Jacaranda Tree to Bloom

Jacaranda trees bloom twice a year, once in the spring, in late May or early June, and once in the fall, in late September or early October. While the petals wither and fall, the decomposition of the trumpet-shaped blossoms emits a harsh and foul-smelling odor, despite the fact that the flowers are fragrant when new. This tree produces a lot of debris; sweep and rake the dead blossoms as soon as you can to avoid a rotten-fruit scent in the future. Planting a jacaranda in a sunny location with well-draining soil will yield the greatest results in terms of getting it to blossom (preferably sandy).

Make certain that the ground surrounding a jacaranda tree is wet but not soggy at all times. Protect the tree from being hit by strong winds. Stop fertilizing the grass that grows around a jacaranda tree. Fertilizer, particularly nitrogen fertilizer, has been shown to limit floral output.

Common Problems With Jacaranda Trees

In the United States, these trees thrive in the warmest climates, such as Hawaii, the southern United States, Southern California, and sections of Texas. They develop much more quickly and easily there, since the circumstances are right. When the plant’s water, sunshine, and temperature requirements are not satisfied, the most serious problems arise.

Yellowing Leaves

Because of inadequate watering, your tree may not generate enough chlorophyll, resulting in chlorosis, which causes the green leaves on your tree to fade and turn yellow. Make sure to give your tree plenty of water. On extremely hot days, water your plant thoroughly and according to the manufacturer’s instructions.

Browning, Dying Leaves

It appears as though trees that have gotten the insect-borne bacterial leaf scorch disease are suffering from a lack of water. The leaves begin to wilt, turn brown, and fall off the tree. The branches and stems become brittle as a result of the drying process. There is currently no treatment available for this ailment. Other probable reasons of browning leaves include leaf burn caused by too much sun or an oversupply of fertilizer, both of which can be harmful. Take a look at those considerations.

Dead Leaf Tips

Excessive fertilization can degrade the mineral to salt ratio in the soil, resulting in dead leaf tips and fading leaf margins on the leaves. If the leaf tips appear to die after fertilizing, it is possible that this is the source of your tree’s leaf problems. A tree that has received excessive fertilization should have its withering or drooping leaves removed, and the treated soil should be properly watered to flush out any remaining fertilizer. FAQ

  • How long do jacaranda trees typically live? It is estimated that the average lifespan of a jacaranda tree is 50 years, with some trees living up to 200 years in a healthy habitat. Is it possible to plant jacaranda trees indoors? It is possible to grow it inside for the first few years of its life if it is placed in a bright, sunny location. Due to the fact that it is such a tall, blossoming tree, it will ultimately need to be transplanted to the outdoors in order to attain maturity. What are some alternatives to having a jacaranda tree in your yard? The jacaranda tree is a popular choice among those who live in colder climates
  • Yet, they may be disappointed when their tree becomes too large to bring inside for the winter. It is possible to replace the jacaranda tree with an avitex tree, which can withstand colder temperatures and produces blooms with beautiful blue spikes at the same time as the jacaranda tree. It also grows half as large as a jacaranda tree, reaching only approximately 25 feet in height as opposed to the 50 feet of a jacaranda tree.

tree roots — Inspector Blog — Safe@Home Inspections

If you have an older home, having someone do a video sewer scope check may be able to save you thousands of dollars. In most cases, the problem I encounter during a home inspection is that I perform a visual, non-invasive inspection (for the most part), and the sewage line is buried beneath the ground, placing it beyond the purview of what I do. Given the age of the house, I can make informed assumptions about the type of material you could have connecting your property to the city sewage or the septic tank.

  1. That is something I am unable to inform you about since I do not know what condition the pipes may be in.
  2. If everything goes according to plan, this operator will send the probe to the connection with the main sewage line or the septic tank and report back on the material and whether or not it is in excellent working order.
  3. It is common for failures to fall into one of two types.
  4. Orangeburg pipe, which is just a toilet paper roll that has been saturated with tar, simply crumbles.
  5. The second category is concerned with the passage of time and its influence on the environment surrounding the pipe.
  6. When it comes to contemporary drainage plumbing, this can be a concern since the lines frequently develop sags that hinder flow.
  7. In my front yard when I lived in Southern California, I had a gorgeous jacaranda tree that was full with flowers.
  8. Trees are opportunistic, and this particular one worked its way through all of the connections in the clay pipe and into the seams where each hub piece was attached.
  9. Clients who live in older houses should take advantage of the new technology, which is readily available.
  10. Despite the fact that these systems are not easily apparent, a video sewer scope system may be used to image them.

Having a video camera line inspection performed to check for any obstructions in the main sewage line is recommended.” Obviously, it is up to the customer to make the decision – but it is a very inexpensive way to provide piece of mind.

Septic Tank Care: Which Trees to Plant Near Your Septic System

The addition of trees, bushes, and other plant life may improve the overall look of any landscape, but it is important to exercise caution when planting anything near a septic system. In our last article, we discussed which portions of your septic system are most sensitive to tree-root damage, as well as how far away you should place your trees from the septic system’s perimeter. The moment has come to take a look if you haven’t already done so. The trees, shrubs, and other plants that are safe to plant near your sewage system and the trees and shrubs that you should avoid growing anywhere near your septic system will be discussed today in detail.

Why might it be beneficial to plant vegetation near or over your leach field?

Several homeowners have become so anxious about the prospect of planting trees, bushes, or anything else in their leach field that they avoid doing it entirely. Although it may seem counter-intuitive, growing the appropriate sort of plants may be good to the health of your septic system. This is due to the fact that plants aid in the prevention of erosion by eliminating excess moisture from your leach field.

Which plants are safe to place near or over your leach field?

Planting plants with shallow root systems, such as grasses, annuals, and perennials, is your best hope for preventing soil erosion. Spring bulbs, wild violets, hollyhocks, bee balm, and deer-resistant perennials are all excellent alternatives for planting in the early spring. When it comes to planting trees and shrubs, on the other hand, you need to be a little more cautious. Planting trees and shrubs with shallow root systems near your septic system is quite safe. Here are a few examples of such plants:

  • Japanese Maple Trees, Holly Shrubs, Dogwood Trees, Cherry Trees, Boxwood Shrubs, Eastern Redbud Trees, Azalea Shrubs, and other ornamental plants

Keep in mind that you should avoid planting any plants near your septic system if you intend to eat the produce from it. It is possible that you may have better development, but none of the fruits or vegetables that are grown will be safe to consume.

What plants should you avoid placing near your leach field?

As a general guideline, you should avoid planting any trees or shrubs that are known to develop quickly and become enormous, as well as those that are known to actively seek out water sources. Other trees are more picky about the water sources they will seek out than others, and some species, such as weeping willow trees, will go for the water in the pipes that go through the leach field and into the surrounding fields. In the following list, you will find some examples of trees and plants that you should avoid planting in or near your leach field.

  • The following plants are included: Japanese Willow Shrubs, Ash and Birch trees, Pussy Willow Shrubs, Aspen trees, Tulip trees, Maple trees, Beeches, and other similar plants.

As we discussed in our last article, any trees or bushes that you plant should be placed as far away from your septic system as possible, regardless of how large they are. For example, a tree that grows to be 30 feet tall will need to be placed at least 30 feet away from your septic system in order to be effective. Our objective at Septic Remedies is to serve as your one-stop shop for all of your septic tank needs. Please contact us or visit our website for additional information on how to properly maintain your septic system.

See also:  Where To Find Out If There Is A Septic Tank? (Solved)

Interesting Facts About The Jacaranda Tree

There was a lovely veil of purple and blue flowers along the streets.

Flowers that have fallen to the ground have created a magnificent carpet of blue. Who wouldn’t want to leave behind the gorgeous jacaranda tree? With the arrival of Spring, we thought we’d put together a list of interesting facts about our favorite jacaranda tree!

  • The jacaranda tree is not indigenous to Australia. In spite of the fact that jacarandas, also known as jacaranda mimosifolia, have been continuously increasing in Australia for more than 150 years, they are not indigenous to the country. Jacaranda seeds, which originated in portions of Central and South America, were considered to have been transported to Europe by sea captains sailing from South America, with Sir James Martin perhaps establishing the world’s first jacaranda tree.
  • As a result, if you want to cultivate jacaranda trees, you’ll need enough of area to accommodate their growth and development. It is reasonable to expect adult trees to reach a height and width of at least 10-15m in ideal conditions, making them an unlikely option for a tiny backyard or as a fence-side planting — your neighbors will not be impressed
  • Planting your jacaranda tree in an inappropriate location will result in a weakened root system. It is important to remember that while evaluating space, avoid planting it near drains, pipelines, water lines, and walkways, since it has a powerful root system and can create fungal issues if dug up or mowed out. The placement of your jacaranda tree near your swimming pool is another typical error. The falling leaves quickly clog the filter, and you will despise yourself for causing so much upkeep.
  • Because baby jacarandas are quite sensitive to the cold, you’ll need to carefully monitor and care for them throughout their first two years of growth. Jacarandas are particularly susceptible to the cold and frost during this period. Following this period, they should be able to develop and adapt to the Australian environment without difficulty.
  • The typical lifespan of a jacaranda tree is 50 years
  • But, they may live for much longer periods of time, with some specimens living to be over 200 years old. They achieve maturity in around 20 years and are capable of regrowth if they are destroyed by new dropping seeds. They are native to the United States.
  • Plants respond to pruning by putting forth clusters of strong, vertical shoots that might detract from the overall look of the plant. It is recommended to let a jacaranda tree to mature once it has been pruned (formative pruning of young jacarandas is normally carried out at nurseries). Once you have begun pruning a jacaranda tree, you will have to be persistent in cutting off the vertical branches.

For more information on how to plant jacaranda trees or for helpful garden management suggestions, contact a member of our knowledgeable Landart team today.

10 Trees You Should Never Plant in Your Garden

Speak to a member of our knowledgeable Landart team now to learn more about planting jacaranda trees or to receive useful gardening advice.

How Certain Trees Can Harm Your Garden

In spite of the fact that trees are a wonderful idea in general, they should not be planted in haste. To ensure that your tree thrives and that unanticipated repercussions are minimized, it is necessary to do thorough planning and preparation. As a matter of fact, there are several trees that you should reconsider planting in your garden because of the following reasons:

  • The tree’s leaves are a shambles. Trees lose their leaves and bark of their own will. Trees, on the other hand, can drop a variety of items in addition to these. Furthermore, they can lose fruits, berries, and seed pods, which can result in a massive mess in your yard every year. Raking and cleaning them may be time-consuming and stressful, therefore it is better to avoid having dirty trees in the first place. Pests and illnesses are a threat to the tree’s health. The fact that certain trees are more sensitive to pests and diseases than others should come as no surprise. It is possible that planting them in your garden would expose other plants to these pests and illnesses. The tree is frail and susceptible to being damaged. Some trees are naturally fragile, making them more susceptible to breaking under the weight of heavy snow or severe winds. Branches that fall can cause harm to things underneath them, as well as injury to individuals who are trapped beneath them. The tree roots have strong water-seeking characteristics. Tree roots are frequently cited as one of the most significant sources of plumbing problems. “Thirsty” trees will seek out any source of water they can find, eventually making their way into your pipes and septic tanks to breed. Depending on the circumstances, you may be required to spend a large amount of money to have the roots removed and your fixtures restored. The tree provides a lot of shade. However, shadow is beneficial to both humans and some plants. In contrast, trees with an excessively dense canopy can prevent sunlight from reaching grass and other plants growing in their shade. Allergies to the species are possible. Some plants generate enormous amounts of pollen, which can worsen allergies in people who are sensitive to it. Those who are allergic to pollen should keep flowering plants out of their gardens in the spring to avoid allergic responses. Some trees have an impact on the soil. Certain trees have the potential to have an influence on the soil. A water-hungry tree, for example, will prohibit others from accessing the resource they require for their own survival. Some trees, such as pine trees and black walnuts, can cause the soil to become acidic or poisonous, causing other plants to die in their immediate vicinity.

Trees to Avoid

As you plan your tree planting, keep these less-than-desirable tree kinds in mind as you go. Some trees should not be planted on your land, and the following are examples. 1.Red Oak (Quercus rubra) The red oak tree is a tangled mess. In the autumn, they shed a lot of huge leaves and acorns. If you park your automobile beneath the shade of a tree, acorns dropping from a high enough limb might cause a minor scratch in the paintwork of your vehicle. Catkins, which are little clusters of pollen-bearing flowers, are also shed in large quantities by red oaks.

  • 2.Sweetgum Trees are a kind of tree that is native to the United States.
  • The tree was given its name because of its untidy seed pods, which are referred to as “gumballs.” The seedpods of this species are spherical, stiff, and spiky.
  • Because of its propensity to grow swiftly while still providing shade, the Bradford pear is particularly popular with developers.
  • Bradford pear, on the other hand, is recognized for having exceptionally delicate branches.
  • Additionally, the beautiful flowers of this species produce fragrant flowers.
  • 4.Lombardy PoplarLombardy Poplar is a fast-growing tree that may be used as a windbreaker in a variety of situations.
  • Unfortunately, the Lombardy poplar is also subject to a variety of pests and diseases, which may quickly transform these gorgeous trees into an eyesore in a short amount of time if not properly cared for.

5.Ginkgo biloba (Ginkgo biloba) Ginkgo trees are gorgeous, durable in a variety of climes, and generally a good choice for gardens – as long as you don’t plant any female ginkgo trees, of course!

In certain locations, it is referred to as a “trash tree” because of its abundance of rubbish.

Unfortunately, there is a price to pay for this.

It loses its bark on a seasonal basis, and its huge, sticky branches are notorious for breaking off and dropping to the ground unexpectedly.

7.Mulberry Mulberries make very wonderful shade trees.

It also contains shallow but vigorous roots that have the potential to break pavements and upend landscape fixtures, among other things.

Its male form releases pollen, which can cause allergic reactions in certain people.

Willows are also thirsty when it comes to water.

The tree has a somewhat limited lifetime as well, lasting just approximately 30 years.

Silver Maple (number 9) Silver maple is a large, fast-growing tree that produces a lot of shade in a small area.

Its shallow roots system also tends to seek moist environments, such as pipes and sewers, tearing up your yard and plumbing in the process.

But that’s just about it with this tree.

It might as well be one of the worst trees to plant on your property.

Choosing a tree for your backyard shouldn’t be all about shape and appearance but about its overall qualities.

Planting a tree is an investment, and you shouldn’t put yourself at risk simply because of selecting the wrong tree species.

Call our toll-free hotline at 1-877-775-7444. We look forward to solving your tree problems and making your canopy beautiful, healthy, and safe! On October 30, 2020/Tips

Great flowering trees for High Desert gardens

  • It has been a pleasure for me over the past few weeks to walk around my yard and see the various trees that not only provide welcome shade, but also display beautiful flowers that have been blooming since the beginning of spring and will continue to bloom into fall, depending on the specific species. Even though I have numerous fruit trees that bloomed in late winter and early spring, the plants I’m referring to in this context were expressly chosen for their blossoms and the fact that none of them are water hogs. The trees in the list are ordered from the ones that bloom the earliest to the ones that bloom a little later in the year. The earliest to blossom is the California native species Western Redbud (Cercis occidentalis), which begins flowering in late winter and then begins to leaf out in early April after it has finished flowering. During the summer, this tree produces a flood of magenta-colored blooms, which are followed by bluish-green leaves and magenta seed pods, which provide aesthetic appeal to the landscape. The leaves change color from green to yellow or crimson in the fall. By winter, the naked branches and ripe seed pods add a sense of structure to the landscape. The tree is drought tolerant and grows to be about 10 to 18 feet tall and broad, so it is a good choice for limited spaces. The Purple Robe Locust (Robinia X ambigua ‘Purple Robe’) is the second to bloom, in early spring, and it produces clusters of sweet-pea-shaped, purplish-pink blooms that endure for three to four weeks. These relatively fast-growing trees may reach heights of 30 to 40 feet in a short period of time. However, because of the invasive nature of their roots, they should be maintained away from septic systems, swimming pool decked areas, walking paths, and house foundations. Other blooming varieties of locust that thrive in the High Desert region include the Idaho Locust (Robinia x ambigua ‘Idahoensis’) and the tiny California native tree/shrub Desert Locust, both of which are endemic to the state (Robinia neomexicana). Among the trees that begin to leaf out in early spring and bloom mid-spring through the summer and fall months is Desert Willow (Chilopsis lin­earis), a drought-tolerant native California species that blooms from mid-spring through the summer and fall months. It may grow to be 15 to 30 feet tall and 10 to 20 feet broad, depending on the variety. According on the variety, it produces trumpet-shaped orchid-like blooms that can be white, pink, lavender, or burgundy in color, or a combination of these colors. However, although it has nar­row willow-like leaves, which give the plant its widespread name, it is not a real willow. Hummingbirds are drawn to it because of its nectar. Crape Myrtle thrives in warm climates with long summers. During the summer, they produce magnificent flower clusters in a range of flower hues, including white, red, pink, and purple, depending on the cultivar. The leaves, which are dark green in the summer, transform to vibrant colors of orange and crimson in the fall, providing a spectacular display of autumn color. Even in winter, the tree’s lovely bark and branching structure add to the overall visual appeal. It grows to be around 25 feet tall and broad, yet it only requires thorough irrigation on a very occasional basis. Parkinsonia aculeata, often known as Mexican Palo Verde, is a fast-growing tree that grows 15 to 30 feet high and broad at first, then slows down, eventually becoming an appealing tree. It has a beautiful shape with its spiky green trunk and branches, feathery leaves, and many yellow flower clusters that appear in the spring and continue to bloom occasionally throughout the summer and autumn. It can endure the alkaline soil of the High Desert and requires just a small amount of water to maintain its health. The Silk Tree, also known as the Mimosa (Albizia julibrissin), has a lovely umbrel­la-like shape. It has the potential to grow up to 40 feet tall and twice as broad, but it may be controlled to a much lower scale. When the sun sets, the leaves turn ferny and light green, and they fold at night. Hummingbirds and other small birds are attracted to the pink, pincushion-like blossoms that appear throughout the summer. When given the opportunity to construct several trunks, it becomes really exciting. It grows quickly when given moderate water, although it may also survive when given little water. Another type of flowering tree that can thrive in the High Desert climate is the Strawberry Tree (Arbutus unedo), as well as the Blue and Foothill palo verdes (Cercidium floridum and C. microphylla, respectively), Goldenrain Tree (Koelruteria paniculata), Texas Mountain Laurel (Sophora secundiflora), and Chaste Tree (Cercidium sp (Vitex agnus-castus). This is by no means a comprehensive list of spectacular flowering trees for the High Desert temperature zone, but it is an excellent starting point for creating a stunning and colorful landscape. CHEERS TO SUCCESS IN THE GARDEN! Micki Brown, a High Desert inhabitant and drought-tolerant plant specialist with a master’s degree in Plant Science, works in the field of drought-tolerant plants. Send your questions to [email protected], and we’ll answer them in the column. To see prior editions of the Mojave Gardener column, go to

Lady Bird Johnson Wildflower Center

topic question
Leaves dropping from a potted MesquiteAugust 11, 2014I have a Prosopis pubescens (Screwbean Mesquite) that I purchased at a nursery in Alpine, TX just a few miles away from me. It was a in nursery style black plastic container. The mesquite is perhaps a. View Mr. Smarty Plants’ Answer
Soil Loosener/Pollinator Plants for HoustonAugust 11, 2014I am trying to establish a mostly-native pollinator way-station in a recently purchased lot in a 100 year old neighborhood in Houston. Much of the property has a thick layer of oyster shell four to si. View Mr. Smarty Plants’ Answer
Final size of a Texas mountain laurelAugust 11, 2014I have purchased a Texas Mountain Laurel. The plant tag says it will grow 25 to 35 feet. LBWF plant data base says 10 to 15 feet. Which data should I go with? It’s either plant close but not close to. View Mr. Smarty Plants’ Answer
Making a pollinator gardenAugust 11, 2014Hello, I have a ditch right by my house and I want to turn it into a pollinator garden using native plants. My problem is, right now it’s so full of weeds that we have to mow those down so soon. For. View Mr. Smarty Plants’ Answer
Recovery of water-stressed AgaritaAugust 11, 2014Hello! I planted a small agarita at the end of May and then left town for six weeks. During that time it was supposed to receive weekly deep irrigations to help it establish, but it seems that som. View Mr. Smarty Plants’ Answer
Growing Texas star hibiscus in Central TexasAugust 11, 2014Hi there, I purchased a beautiful Texas Star Hibiscus that I want to plant in my yard. Unfortunately, my yard being in Travis Heights, I hit a lot of caliche when digging. To plant some other nativ. View Mr. Smarty Plants’ Answer
Identification of tree with outrageous thornsAugust 10, 2014Can you identify this tree? It has these outrageous thorns on its trunk. They are in clusters and are anywhere from 1″ long to 4″ long or so. View Mr. Smarty Plants’ Answer
Certified organic native grass seeds for TexasAugust 10, 2014Thanks for your previous answer to my pasture grass seed question. We know about Native American Seed but they don’t sell certified organic seeds. We’re not sure whether we’ll be able to find cer. View Mr. Smarty Plants’ Answer
Will deer eat bellflowers?August 10, 2014Are deer attracted to the bellflower? Will they eat it? View Mr. Smarty Plants’ Answer
Flowering vine with yellow flowers in NevadaAugust 10, 2014A flowering vine started growing in our Henderson back yard about 2 months ago. It has variegated green leavesyellow flowers. We decided not to pull it outnow it’s spreading. I’ve looked on v. View Mr. Smarty Plants’ Answer
topic question
See also:  How Much Is A Septic Tank Service On Average In California? (Perfect answer)

Help! This tree is breaking my wall – DIY

One of the advantages of working as a landscaper is that you get to witness firsthand how seemingly harmless planting methods from the past may inflict significant damage to a property’s landscaping. Planting trees too close to a home, perimeter wall, or other hard structure, such as an in-ground swimming pool, is one of the most prevalent issues we find in this respect. When planting a tree, it is critical to select the proper location for the tree since it may be a difficult and expensive procedure to transplant or remove plants that have been planted in the inappropriate location.

  • As an illustration, the photograph below displays a tree aloe (Aloe barberae) that has been planted close to a home in order to improve the entry.
  • It may grow to be up to 18m tall and has a spread of between 4 and 8m depending on how it is pruned.
  • Aside from that, the trunk of this tree expands with age and may grow to a diameter of 3m, which would cause it to become a nuisance to the house.
  • Gardeners, on the other hand, are not always in charge of deciding where trees should be planted.
  • If a seed has dropped from a neighbor’s land, it is possible that the seed was deposited in the droppings of a bird, which is more likely.
  • In this particular instance, the tree was allowed to grow naturally and has now reached a height of 4m, which indicates that it may be damaging the building’s foundation.
  • Make certain that the stump and big roots are removed as well, as they are prone to produce new shoots if left in place.
  • An raised concrete surface has been created by the roots of a jacacaranda tree (J.m.
  • See photo below.
  • As a final point, when it comes to removing and replacing trees, it is far preferable to avoid the expenditures associated with property damage and instead plant trees that will be non-aggressive and just as effective in years to come rather than removing and replacing trees.
  • To prevent having to trim or entirely remove a tree at a later date, always investigate the full-grown size of the tree you desire to plant and provide enough space for the tree to grow and form a natural shape. Take into consideration the behaviors of the roots of the tree you’ve picked
  • Inspect your plans to see if you have left enough room for an expanding trunk.

For additional information, please see our article ” Choosing a tree for your garden ” or go to Browse the zato website to discover more about the trees that are endemic to Southern Africa.

Privacy Trees: Everything You Ever Wanted to Know

30th of May Isolation trees are beautiful additions to any yard, as they provide you with privacy from your neighbors and noise reduction while adding curves. They will also aid in the protection of your landscape from harsh weather conditions, as well as the improvement of the quality of air in your backyard. When it comes to selecting the best privacy trees for your yard, careful consideration must be given to every detail. This guide is intended to act as a tool to assist you in ensuring that the trees you purchase and plant will thrive and be a part of your landscape for many years to come.


If you make a decision in haste, you might be in for a lifetime of disappointment. Potential difficulties, on the other hand, may be avoided with careful planning. Take your time and carefully choose the trees that will provide you with all of the characteristics you seek.


Are you only interested in the privacy this tree provides, or do you want it to add blooms and texture to your yard as well? Or will they serve as a dark green backdrop for your flowering plants, allowing your yard to stand out from the rest? Knowledge of your requirements will assist you in making your ultimate decision when the time comes. a.


Take into consideration the location where you intend to place your trees. You’ll need to cover a certain number of feet. This will be especially significant when estimating the number of trees that will be required for your project. Also take into consideration how much space in your yard you intend to devote to this screen. If you do not have a large yard, the size of the trees you pick will be influenced by this. The size of your yard has an impact on how many privacy trees you need and how they are spaced.

For smaller trees, such as the Emerald Green Thuja, this is especially true.


What is the minimum height requirement for your privacy screen? The pace of growth of a tree will have an impact on your selection. You should keep in mind that larger, faster-growing trees can grow to be quite tall and wide in a short period of time. The placement of these plants near utility wires, buildings, or walkways is not recommended. If your trees are planted near these facilities, you may need to prune them on a regular basis. In addition, it is a good idea to plant trees in areas where the root systems will have sufficient space to spread out.

As a result, their root systems will require a lot of space to grow and spread out.

A further disadvantage of fast-growing trees is that they have a shorter life span than other types of trees.

Storm damage to trees might be exacerbated as a result of this condition. While slow-growing trees are more resilient and may typically live for hundreds of years, they may not reach their full height during your lifetime because of their slower growth.


Each tree has certain requirements for its upkeep. Most trees do well in wet, somewhat acidic soil, which is ideal for their growth. However, if you reside in a location with less-than-ideal soil conditions, you may need to supplement your tree planting mix with organic or acidic material to ensure that your trees thrive. When it comes to soil, it’s critical to understand the pH balance of your soil before you begin planting. Varied types of trees require different pH values in their soil. When determining the pH of your soil, we recommend that you use a pH tester.

  1. To get a more accurate average number for your soil, take numerous measurements in different locations of your yard while testing it.
  2. A adequate amount of water is required for privacy trees.
  3. You will require access to a reliable water supply, such as a sprinkler system or a watering can.
  4. The majority of trees do best in full to partial sunshine.

Existing Plants

If there are already established plants in the area, your new trees should have watering requirements that are comparable to those of the current plants. For example, drought-tolerant trees should be planted together, and plants that require the same amount of water should also be planted together.


Some Homeowners’ Associations and Private Covenants may impose limits on the kind of trees that can be planted on their properties. Make sure to verify with them first before making any purchases. Agricultural restrictions on particular trees are also in place in several states. Please with your local agricultural extension office if you have any questions about whether the trees you are interested in are prohibited to certain states. Generally speaking, government regulations do not pose a problem.

Deciduous or Evergreen Trees?

They shed their leaves in the autumn and stay naked all winter. The advantage of leaf loss, on the other hand, is the beautiful display of colors that occurs before the leaves fall. They also happen to be among of the most effective shade trees. During the summer, these trees may provide shade for your windows, allowing your home to remain cooler. Most consumers will save money on their air conditioning bill as a result of this. Furthermore, deciduous trees are capable of assisting in the heating of your home throughout the winter months since they shed their leaves, allowing sunlight to pass through the branches and into your home.

  • Evergreens Evergreens, for example, make excellent additions to your yard since they provide year-round privacy for spaces such as your bedroom and bathroom windows, which are otherwise exposed.
  • The leaves of most evergreens are made up of scales or needles.
  • Conifers, also known as Evergreens, can grow at a rapid or slow rate, depending on the kind you select to plant.
  • Evergreens do not cease to grow after ten years, however their growth may become more gradual over time.

Also, there are some plants, such as Hornbeam Hedges, that will preserve their older, dead leaves until the next spring, which is a nice feature.

Size and Spacing

Take into consideration the dimensions of the place where you intend to put your trees. The height and width of different species of trees varies as well. You should also examine the mature height of the tree that you are comfortable with in your yard. When planting, it’s also a good idea to keep your trees at least 10 to 15 feet away from your home or foundation, depending on the species. Moreover, it is recommended that you maintain a distance of at least 4 to 5 feet from patios, fences, and other buildings.

  1. After you’ve determined why you want to plant privacy trees, you’ll need to establish exactly how tall you want your privacy screen to be.
  2. When you plant your trees in rows, they will not spread out as far as they would if they were planted individually in the same spot.
  3. If the trees are spaced correctly, they will be able to receive the nutrients they require in order to grow large and tall.
  4. The breadth of the trees’ crowns is the most important factor in spacing.
  5. This may be accomplished by planting your trees 12 inches to 24 inches apart in their centers, depending on their size.

Common Screening Problems

It is not uncommon for home owners to plant a formal row of the same variety of tree in order to achieve a uniform appearance in their landscape. Plantings attempted in this manner frequently result in the absence of one or more trees. Instead of planting only one type of tree, you could experiment with planting a variety of trees and shrubs together. For big to medium-sized settings, this is very useful. Planting a variety of trees in your landscape will boost the diversity of your landscape.

Furthermore, most landscapes benefit from staggered row planting since it appears more natural.

It will also assist you in creating visually appealing backdrops for blooming and fruiting trees that are visible from your house, as well as allowing for enough screening and ventilation around your property.


If possible, wait until the weather is cold or damp before planting trees. If you are unable to plant your trees right away, we recommend keeping the roots of your trees moist and placing them in a cool, shady, and protected location until you can do so. For bare-root trees, soak them for 3 to 6 hours before to planting so that the roots may become more firmly established. Remove any plastic, burlap, or reinforcing wire that may have accumulated around the root-ball. Ensure that the root-ball remains intact and undamaged during this procedure.

  • Start scooping backfill into the hole with your shovel.
  • Fill the hole with water, making sure to eliminate any air pockets from the planting spot.
  • After the trees have been planted, they should be re-watered.
  • Mulch should be placed 3 to 6 inches out from the base of your trees to ensure proper drainage.
  • During the first two weeks, make sure to thoroughly water your trees.
  • Moisture-retaining soil that keeps its shape will not require much water.

Mulching helps to retain moisture and minimizes the frequency with which plants need to be watered. Provide your trees with additional water during prolonged dry times, even throughout the winter. Providing the trees with an adequate quantity of moisture will help to prevent root system damage.


It is not necessary to fertilize your trees until after they have grown in their new site for a year. It is not recommended to apply fertilizer in the planting hole during the transplantation process since it may cause root harm. It is preferable to use organic fertilizers for your trees since they are less destructive to the environment than inorganic fertilizers and because they are derived entirely from natural animal and plant sources. The use of nitrogen-containing fertilizer can aid in the acceleration of your trees’ growth.

  • However, before to fertilizing your trees, make sure to carefully read the label.
  • You may either drop or spread fertilizer under the tree’s canopy, depending on your preference.
  • Using ingredients such as leaf mold, sawdust, manure, peat moss, and pine bark in your garden may really enhance the quality of your soil while also providing essential nutrients for your plants to thrive.
  • If your trees do not require additional potassium or phosphorus, it is better to stay with nitrogen-based fertilizers that are high in nitrogen.
  • Trees should be fertilized after the last frost has passed in your region.
  • Fertilizing the trees enables them to stave off diseases and overcome any mineral deficits they may be suffering from.
  • Unless you fertilize your lawn on a regular basis, you may forego fertilizing your trees.

Pruning Privacy Trees

Pruning is not necessary for newly planted trees since they are not yet established. Instead, we propose that you prune just the branches that are dead or infected. Before you make any cuts to your tree, keep in mind that improper pruning can cause harm to the tree that will endure for a long time. Cuts should be made outside of the branch collar while trimming your tree so that you do not cause harm to the trunk. It is critical to maintain the health of the trunk since it is here that the internal deterioration begins to take hold.

If you do need to trim a bigger branch, make sure to cut it back to a secondary branch or bud before continuing with the pruning.

Any incisions made in the space between buds and branches might also result in the demise of the plant.

Take care not to trim the tip of this dominating stem, as this might cause it to break.

The best course of action is to trim or eliminate one of the stems in order to avoid structural instability in your tree.

Take into consideration the fact that the branches assist the tree in the production and storage of food.

Although Blair Brown is not a conventional gardener, she is becoming more and more interested in the world of plants (pun intended!).

She is the Content Marketing Manager at, and she is becoming more and more interested in the world of plants. She has liked getting her hands dirty with plant care and upkeep, as well as expanding her plant collection, particularly with exotic indoor kinds.

Leave a Comment

Your email address will not be published. Required fields are marked *