The general rule of thumb is that most septic tanks can be buried anywhere from four inches to four feet underground.
- between 4 inches and 4 feet In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter.
How deep is the outlet pipe on a septic tank?
After the solids settle out, effluent leaves the septic tank through the outlet pipe and flows to the drain field. The outlet pipe should be approximately 3 inches below the inlet pipe.
What should be depth of septic tank?
Septic tank shall have minimum width of 750 mm, minimum depth of one metre below water level and a minimum liquid capacity of 1 000 litres.
How do I hide my septic pump?
Find what fits in your yard and climate.
- Plant tall native grasses with fibrous roots around the opening to conceal the tank lid from view.
- Place a light statue, bird bath or potted plant over the septic lid.
- Septic tank risers and covers are an alternative to concrete and blend into green grass.
How far should the distribution box be from the septic tank?
Common guidelines require at least 50′ clearance distance between a well and a septic system tank or 150′ between a well and a septic drainfield or leaching bed but you will see that different authorities may recommend different distances. Local soil and rock conditions can make these “rules of thumb” unreliable.
How many lids are on a septic tank?
A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.
What are the signs that your septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
How do you tell if your septic tank is full?
How to tell your septic tank is full and needs emptying
- Pooling water.
- Slow drains.
- Odours.
- An overly healthy lawn.
- Sewer backup.
- Gurgling Pipes.
- Trouble Flushing.
How often does a 1000 gallon septic tank need to be pumped?
For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.
How deep are drain fields buried?
A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.
Does shower water go into septic tank?
From your house to the tank: Most, but not all, septic systems operate via gravity to the septic tank. Each time a toilet is flushed, water is turned on or you take a shower, the water and waste flows via gravity through the plumbing system in your house and ends up in the septic tank.
How can I make my septic mound look nice?
Three Tips For Landscaping Around Your Septic Mound
- Cover the mound with flowers. Turning your septic mound into a stylish flower bed can help make it more attractive.
- Build a fence around the septic mound.
- Add soil around the mound for camouflage.
What can you put on top of a septic field?
Put plastic sheets, bark, gravel or other fill over the drainfield. Reshape or fill the ground surface over the drainfield and reserve area. However, just adding topsoil is generally OK if it isn’t more than a couple of inches. Make ponds on or near the septic system and the reserve area.
Is it OK to cover septic tank lids?
If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)
Septic Tank Design Depth – how deep should the septic tank be located
- When establishing a septic tank, you may ask a QUESTION or make a COMMENT regarding how deep the septic tank should be located.
InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Design depth for a septic tank: What are the most frequent depths to which septic tanks, cesspools, seepage pits, and drywells are buried? Is it necessary to locate the septic tank below the frost line in order to prevent it from freezing? Septic tanks are placed at a certain depth, and there are various elements that impact the actual depth to which a septic tank (or cesspool, drywell, or soak-pit) will be sunk, which are discussed below.
For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.
Septic Tank Installation Depth
Table of Contents for the Article Series
- SEPTIC TANK DESIGN DEPTH- this article
- SEPTIC TANK DESIGN DEPTH
- SEPTIC TANKDRAINFIELDFREEZE PROTECTION
How Deep Should WePutthe Septic Tank at Original Installation?
Septic tanks may be built almost anywhere in the soil, regardless of its depth. When operating in a freezing climate, even in uninhabited homes, it is unlikely that the septic tank serving an occupied home or even an unoccupied one will freeze. This is due in part to latent heat received by the septic tank’s bottom from earth, in part to heat generated by bacteria in the septic tank, and in part to warm wastewater entering from a building served by the septic system, and in part to warm wastewater entering from the building served by the septic system.
You’ll kill the bacteria, damage the drainfield, and taint the surrounding ecosystem as a result of this.
Factors Determining Septic Tank Depth
The following are the primary elements that influence the actual depth at which a septic tank is likely to be buried (and, consequently, the depth to which you may have to dig to locate the septic tank) at a specific site:
- The depth to which the lowest sewage line departs the structure that the septic tank serves is referred to as the sewer line depth. Given that we often rely on gravity to transport sewage from a building to a septic tank, the tank will be lower than the waste line that exits the building that it serves. a spot where the contractor discovered site characteristics suited for burying a septic tank because of its form, rocks, and impediments If a location has bedrock or huge rocks that are near to the surface, the tank may be relocated
- The greater the distance between the tank and the structure, and the greater the depth of the tank if the system relies on gravity to carry sewage, the deeper the tank will be. We don’t place septic tanks any deeper than they need to be since we are normally transporting effluent from the septic tank to the drainfield by gravity as well as by pumping it out. Plumbers often build sewage lines to slope down from the inlet to the outlet at a rate of 1/8″ per foot to 1/4″ per foot of linear run of the waste pipe, depending on the kind of waste pipe. In order to avoid septic drainfield burial at an excessive depth, we must ensure that there is sufficient air in the soil, since the absence of oxygen deep in the soil will inhibit certain desired bacterial action (the aerobic bacteria) that is required to break down and process sewage. It is certainly possible to locate and position the septic tank anywhere, including uphill from the building, if a sewer ejector pump or grinder pump system is utilized to transport sewage from a structure to an underground storage tank. If a sewage effluent pump is used to transport septic effluent from the septic tank to the drainfield, we may, of course, locate the tank “downhill” from the drainfield as well
- But, if a sewage effluent pump is not utilized, we cannot. Growing grass: If the septic tank is just 2 or 3 inches below the surface of the earth, you might as well have left the top of the tank visible, because grass will not grow in such thin soil as you would expect. Adding 6″ to 12″ of backfill may be sufficient to allow grass to grow over the septic system
- However, this is a purely aesthetic issue and does not affect the system’s functionality. See SEPTIC SYSTEMS, OVERHAULED PLANTS
- Recommendations from the manufacturer: Some modern septic treatment system designs need the use of a skilled system operator to perform highly specified inspection and maintenance intervals. According to the information provided atBAT MEDIA SEPTIC PLANTS, BAT septic systems (biologically accelerated treatment) are maintained or examined at 6-month intervals, among other things. According to the maker of that technology (Jet Inc.), it is extremely critical that the finishing grade slope away from the facility when completed. In addition, the grade must be at least 1″ below the bottom of the access covers to be considered. (Jet retired in 2016)
A service riser should be put in deep septic tanks to provide access to the tank. Plungers are large-diameter “wells” that are installed over the entrance and/or outlet ports of a septic tank in order to provide simple access for tank pumping, inspection, and baffle repair. Plungers are also used for septic tank pumping, inspection, and baffle repair. If the septic tank is sunk more than a few inches below the surface of the earth, good practice calls for the installation of a septic riser, which is a high diameter pipe that allows for easy access to the septic tank for inspection and cleaning.
Continue reading atSEPTIC TANK DEPTH to learn how to determine the depth of a septic tank’s cover, or choose a topic from the closely-related articles listed below, or see the completeARTICLE INDEX for more information.
Alternatively, view the FAQs on SEPTIC TANK DESIGN DEPTH – questions and answers that were originally posted on this page. Alternatively, consider the following:
Septic Tank Articles
- The following topics are covered: SEPTIC DRAINFIELD LOCATION
- SEPTIC DRAINFIELD SIZE
- SEPTIC SYSTEM INSPECTION LEVELS
- SEPTIC TANK COVERS
- SEPTIC TANK DESIGN STRENGTH SPECS
- SEPTIC TANKDRAINFIELDFREEZE PROTECTION
- SEPTIC TANK, HOW TO FIND
- SEPTIC
- THE DISTANCE TO THE SEPTIC TANK
- FINDING THE MAIN WASTE LINE EXIT
- POSITIVE SEPTIC TANK LOCATIONS
- SEPTIC TANK COVERS
- SEPTIC TANK DEPTH
- SEPTIC TANK DESIGN DEPTH
- SEPTIC TANK LOCATING EQUIPMENT
- SEPTIC TANK RISERS
- SEPTIC TANK GRASS OR SNOWMELT
- SEP
- THE MISTAKES MADE IN SEPTIC TANK PUMPING
- THE SEPTIC TANK PUMPING PROCEDURE
- THE SEPTIC TANK PUMPING SCHEDULE
- THE SEPTIC TANK RISERS
- THE U.S. SEPTIC AUTHORITIESDESIGN SPECIFICATIONS
- THE MISTAKES MADE IN SEPTIC TANK PUMPING
Suggested citation for this web page
DEPTH AT INSPECTION OF SEPTIC TANK DESIGN An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Apedia.com. Alternatively, have a look at this.
INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS
Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.
Ask a Question or Search InspectApedia
We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.
Technical ReviewersReferences
Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.
How Deep Are Septic Tanks Buried? (And How Do You Find It?)
It is possible that this content contains affiliate links. It is possible that I will receive a commission if you make a purchase after clicking on an affiliate link. In addition, as an Amazon Associate, I receive a commission from qualifying purchases.- Septic tanks, for example, might become a requirement in more remote places where some services are not readily available or easily accessible. After all, we rely on contemporary conveniences such as adequate plumbing to make our lives more comfortable and easy.
Discovering the location of your septic tank in your yard, as well as what may be grown near or on top of it, will help you determine how much of your yard is suitable for regular gardening.
You May Not Know
Despite the fact that it appears to be something that every homeowner should be aware of, understanding how deep a septic tank is buried can be difficult to determine. Perhaps you forgot about the septic tank after it was installed years ago, or perhaps you are moving into a house that already has a septic tank constructed in previously. Whatever the situation, determining the depth of your septic tank can be a challenging task under the circumstances, especially if you are unsure of the location of the lids.
How to Locate Your Septic Tank
Perhaps you’re unsure of the location of your septic tank on your property and are attempting to identify it on your own. There are really quite a few quick and simple methods for determining the location of your tank without having to go through a lengthy process. The first method is to follow the path laid out by your sewer lines. Typically, the tank and your drain field will be placed along a line parallel to the sewage line that goes from your property out to the street. Your home’s crawl area or basement may even have a four-inch sewage line that leads away from the structure of the building.
- Follow the pipe all the way across the yard, checking every few of feet to make sure you’re still on the right track, and then turn around.
- When you don’t feel like digging around in your yard, you can always look up your house’s address in the county records database.
- Diagrams with measurements and even the particular location of where the septic tank is located should be included in this document.
- You can also choose to dig your lid out from under it.
- This is what will tell you how many lids are on your septic tank and how many are missing.
- The majority of septic tanks are rectangular in shape and measure around in the neighborhood of 5′ x 8′ in size.
- If you are unable to determine the position of your septic tank using a probe, you will need to do a shallow excavation around the perimeter of the tank using a shovel in order to finally locate the lid.
- First, look for visual cues to help you.
- There is no doubt about it, this will tell you exactly where the tank is located beneath.
- Take a look at the plumbing in your structure, as well as the overall state of the property, to get a good sense of where the tank is situated.
It will be full to just a few inches below the underside of your tank lid when your tank is fully charged to its regular level of filling capacity. If the lid is constructed of plastic, fiberglass, or steel, the upper surface of the lid may have some variation in color or texture.
Where Should the Septic Tank Be Located?
If your property does not presently have a septic tank, but you are interested in the possibility of installing one, it is critical that you understand where it should be installed. Ordinarily speaking, most septic tanks will be situated between 10 and 25 feet away from the house. You should bear in mind that septic tanks cannot and should not be located any closer than five feet from your residence. Using a probe, you may search for flat concrete to determine whether or not a tank has previously been put on a property that you have recently purchased.
Planting Above a Septic Tank
Even though it may not appear to be the finest idea in the world, putting vegetation over a septic tank may really be perfectly acceptable as long as you choose the appropriate plants to grow. Not only is it perfectly OK to do so, but it may also be rather helpful depending on what you are planting and harvesting. It is possible to avoid erosion in your tank with the correct sort of vegetation, and it is even possible to absorb some of the additional moisture that might accumulate in your drain field.
- Perennial plants and grasses (as previously indicated) are the ideal kind of plants to use in and around your drain field and septic tank.
- You can use non-woody ground covers for a similar purpose as you do with woody ground covers.
- Take, for example, the expanding environment.
- If you don’t have access to enough sunshine, you might want to choose a shade garden plant instead.
- Keep in mind that the soil that surrounds the septic tank drain field will typically be wetter than the surrounding soil in the rest of the yard.
- As a result, choose a perennial such as a hollyhock, wild violet, or bee balm to ensure that you cover all of those bases when planting.
- A septic system beneath these plants does not imply that deer will avoid the area because of its presence on your property.
- Something like a spring bulb or an attractive grass that the deer aren’t generally interested in eating.
Plants That You Don’t Want to Grow
Just because you have the option of planting over your septic tank does not mean that everything is appropriate for this situation. A few plants should be avoided at all costs while landscaping around your septic tank, particularly huge trees that are known for their rapid growth. On the same vein, shrubs and trees with aggressive root systems are some of the worst plants to grow around your home. These roots will shoot out in quest of water, and they will not be concerned with where they locate it.
The infiltration of those roots into your septic drain field might result in catastrophic damage to your septic tank and drain field.
It’s possible that you’ll need a complete replacement.
Many other plants have strong root systems that you should avoid growing anywhere near your septic tank or drain field, and there are lots of them.
How Your Septic System Works
It is possible that understanding how your septic system operates may help you better manage, maintain, and care for it. Aside from that, it is just a large tank buried in the ground that collects your waste (which is true, but still). In remote locations, there may be a deficiency in sewage infrastructure. Because not every rural location is the same, it is not a given that septic systems will be required in your local rural area. The septic tank, in any case, serves as a form of wastewater treatment facility when there are no sewage lines available.
- The tank is designed to be waterproof, ensuring that your wastewater does not leech into the surrounding environment.
- Solids sink to the bottom of the container, scum rises to the top of the container, and liquids sit in the center of the three levels described above.
- The wastewater that is being discharged from your home is the cause of the exit.
- This liquid is carried out of your home through a pipe and into a bigger portion of your sanitary sewer system.
- Your drain is typically comprised of a network of perforated PVC pipes that are put underground in trenches to collect water and waste.
- Because the drains are perforated, the wastewater is allowed to seep out into the crushed gravel or stone, and then eventually into the surrounding soil.
- The natural evaporation process will then take care of any surplus moisture in the soil, unless you do something to prevent the water from flowing out of the pipes.
How to Plan a Septic Field
The tank is only one component of the whole equation. You’ll also need a drain field to catch all of the liquid waste that will be generated. When you are planting around your septic tank, the drain pipes are the most significant source of worry. Having those aggressive roots infiltrate and ruin your septic drain system is the very last thing you want. When this occurs, it can prevent your septic tank from emptying correctly and potentially cause it to get contaminated by groundwater. According to a solid rule of thumb, the less horticultural labor you have to do in close proximity to your septic tank, the better.
Just remember that they must be planted every year, so keep that in mind while planting them.
The first step is to fill in the septic drain field with earth.
In the second instance, too much mulch is being applied to the area in question. The third issue is that you may be watering your plants more than you should be. All three of these factors can impair the capacity of your drain field to evaporate in a typical manner.
How Deep Is A Septic Tank?
Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. Septic tanks are tanks that are built below the surface of the ground. The depth of the tank is determined by a variety of elements that are taken into consideration during the tank’s installation. It is vital to know the depth of a septic tank, especially when access is required for pumping or inspection of the tank.
So, how far down does a septic tank go?
They are generally rectangular in design and measure 5 by 8 feet in dimensions.
CALL 855.925.0760 FOR SEPTIC SERVICES
When it comes to septic tanks, how deep should they be? Because every condition and location is unique, the depth of a septic tank must be determined based on the specifics of the situation. As a result, before settling on a structure, the designer takes a variety of things into consideration. Assume that the soil type is such that it permits the use of the gravity system to function. Consequently, the septic tank may be built in a convenient location near to the surface. Now, this suggests that the lid can be raised to the level of the grade.
- So it allows for the entire effluent to be transported from the septic tank to the distribution section.’ This is the location where they are disseminated.
- Depending on the weather conditions, they might be shallower or deeper.
- The depth of the drain field is also determined by the level of the tank.
- Septic tanks are built substantially deeper in colder climates to accommodate the ice and snow that accumulates.
CALL 855.925.0760 FOR SEPTIC SERVICES
This is determined by elements such as the kind of soil and geology in which it is constructed. Another consideration is the depth of the sewer pipe leading out from the property. Similarly, in cold areas, the latent heat from the earth, along with the bacterial activity of the sewage, keeps the water from being frozen.
Any septic tank should not be buried too deeply underground, since this might cause harm to it and prevent it from performing its intended purpose. Here are a few examples of such elements that have been well explained:
- The presence of a high water table makes a deep septic tank an unwise choice in these circumstances. It is possible that extra soil will be required in order to improve absorption. It results in the formation of a mound, which can function as an above-ground drainfield.
- Type of Soil– The type of soil and the amount of organic matter in the soil influence the depth of the septic tank. High water tables are frequent in clay-rich areas, and they are especially prevalent in the southwestern United States. Professionals can assess the composition of the soil and make recommendations for the depth of the septic tank based on their findings.
- Site Characteristics– As you plan your system, your contractor will be able to evaluate the characteristics of your property. Drainage patterns, water bodies in the area, and slope are all included in this type of study. They can calculate the optimal depth of the septic tank based on these considerations.
- Tank Kind– The type of tank also has an impact on its performance. There are several different types of septic tanks available, some of which may contain up to 2 to 3 feet of earth on top. As a result, if the tanks are placed significantly deeper, the manufacturer’s guarantee will be violated.
CALL 855.925.0760 FOR SEPTIC SERVICES
A riser should be constructed in septic tanks that are located deep in the ground. Risers are large-diameter tubes that are commonly referred to as ‘wells.’ These are installed directly above the input baffle access point for the septic tank. This is often where the outlet is located. The major reason for installing it is to make it easier for specialists to get to the pump when they arrive to work. Professionals require access to perform services such as baffle repair, inspection, septic tank pumping, cleaning, and other tasks.
This pipe has a big diameter, which allows for convenient access to the tank for pumping and inspection purposes.
How to Find the Septic Tank Lid Deep Below the Surface?
Following these procedures will assist you in determining the depth of your septic tank lid, which will assist you in determining the depth of your septic tank lid:
- You must look for the locations where pipes are exiting your home. This will be located in the basement area. So simply keep an eye on where these pipes are leading. You only have to walk 10 steps from your home. Septic tanks are typically located roughly 10-20 feet from your front door
- You may inspect them with a steel probe if necessary. This should be a maximum of 5 feet in length. Make use of it to drive into the earth. You will be able to feel the location of the septic tank
- Nevertheless, you must use caution so as not to harm the lid. It is possible to puncture it if you are not careful. The first cap is normally found in a grassy area, and if it is punctured, it will cost a lot of money to repair it, so be careful not to puncture it. This is generally located towards the edge of the tank
- The tank’s general width is six feet
- And you may now go back to your front door. You should be able to identify the other cap after only 6 feet of walking. You will receive the discharge cap after taking two steps.
Questions Related to How Deep is a Septic Tank
The lids of septic tanks are often situated around the ground level. The lids are often buried anywhere from 4 inches to 4 feet deep, depending on the situation.
- Most of the time, the septic tank lids are located below ground. The lids are often buried anywhere from 4 inches to 4 feet deep, depending on the circumstances.
It is not suggested to put a septic tank at a location that is too deep. If it is implanted too deeply, it is possible that it will malfunction on a regular basis. It is possible that effluent may backlog on a regular basis and will not naturally flow into the drainfield.
- Whether I am allowed to drive over the septic tank, which is buried underground
No, you should never drive over a septic tank, even if you are aware that it is buried deep down. In a short period of time, driving over the tank will damage its surface, causing it to crack, and cause it to stop operating.
- Despite the fact that the septic tank is well buried, it is never a good idea to drive over it while driving. In a short period of time, driving over the tank will damage its surface, causing it to crack, and cause it to become unusable.
You can look through your property records to see if there are any details concerning the septic tank’s construction. If you have only recently moved into the neighborhood, you might inquire with the homeowner. If nothing else seems to work, you might enlist the assistance of the specialists who come to examine or pump your water.
- How can I find out if there is a problem with my septic tank, which is buried deep underground?
It is advised that you have your septic tank tested on a regular basis in order to spot problems early on. Furthermore, if you notice any indicators of a septic tank problem, such as a bad odor or sewage backup, it is time to have it checked. If you are unsure about the depth of your septic tank, you can get assistance from a septic tank professional. They can assist you in discovering the lid of the tank much more quickly, regardless of how deep the lid is hidden. The depth of the septic lid is typically 5 feet, however this might vary depending on the depth of the tank.
CALL 855.925.0760 FOR SEPTIC SERVICES
A septic system is made up of two lengths of pipe that are connected together. Initially, it runs from the house, where the system services are located, to a tank, where the waste is separated and solids settle out. The second section runs from the tank to the drainage field, where fluids from the tank are dispersed into the earth underneath the tank.
The process of installing the first run of pipe is quite similar to that of installing a traditional sewage line. It is necessary to maintain a downhill slope to the storage tank.
Locating the Septic Tank
The tank serves as the nerve center of the septic system. It is required to be situated between the residence and the drainage field. Each and every septic installation must begin with a soil test, and depending on the results, soil conditions may necessitate the placement of the tank in a less-than-ideal site for digging sewer lines. Also required are minimum setback distances from property borders, functioning wells, surface water and other obstructions to provide a safe working environment.
Tank Depth
A standard septic tank has a 4-inch intake at the top, which is positioned towards the bottom. Ideally, a 1/4-inch-per-foot slope toward the pipe from the house should be maintained by the pipe connecting to it. To put it another way, for every 10 feet of distance between a tank and a home, the inlet must be 2 1/2 inches lower than where the pipe departs the house at its lowest point. The pipe usually exits at ground level, although it may need to pass beneath a foundation footing or concrete pad in rare cases.
Digging the Trench
The trench for the septic pipe should be dug before the hole for the tank since you will need a backhoe to complete the work and the tank will get in your way if it is already in the ground. To allow rainfall to drain properly, the pipe should be placed on a 2- or 3-inch bed of drain rock, so remember to account for this extra depth when digging. It is normal to use a four-inch pipe, and it should be installed far enough down to link with the main soil stack, which is a three-inch pipe that runs vertically past the main bathroom and through the roof of the home.
Precautions
Local building and health agencies will demand permits for a septic tank installation. You will also be required to submit a design plan before the permits will be provided, so prepare ahead of time. This layout should be developed in collaboration with a local builder who is familiar with the unique characteristics of the topography in your neighborhood. Stay away from planting trees or plants near the tank, drainage field, or any of the pipe systems. They will be drawn to the pipes in their hunt for nutrition, and their roots will be able to successfully block them.
Removal may be both expensive and time-consuming.
Septic Tank Depth
Permits for a septic tank installation are required from the local building and health agencies, and you will be required to submit a design plan before the permits can be obtained. This plan should be developed in collaboration with a local builder who is familiar with the unique characteristics of your terrain. Stay away from planting trees or plants near the tank, drainage field, and other pipelines.
They will be drawn to the pipes in their hunt for nourishment, and their roots will become entangled in them. It is impossible to use your septic system until the roots have been completely removed from the pipe. Getting rid of it can be a difficult and expensive process.
How to Care for Your Septic Tank
Septic systems are built in around one-fourth of all residences in the United States, and they are particularly common in rural regions that are not served by municipal sewer systems. In contrast to conventional sewage systems, which pump solid and liquid waste from the home into sewer mains and then to a centralized sewage treatment plant, septic systems pump waste from the house out into a drain field and an underground septic tank.
How Septic System Works
The water and wastes carried by the water in a standard septic system go down the home’s drain system and through a single main sewer pipe to the septic tank, where they are treated. It is possible for wastewater to flow only by gravity or with the aid of an electric pump. However, this is not always the case. The septic tank is designed to store waste material for an extended period of time, allowing solids to sink to the bottom while oil, grease, and liquids – later known as scum — float to the top.
As bacterial activity breaks down the pathogens, the liquids slowly trickle down through the soil and into the groundwater.
Between times, the solids in the tank degrade under the influence of anaerobic bacteria and form an oily substance that settles at the bottom of the tank.
If the bacterial action is efficient, the volume of these solid wastes is significantly decreased as they decompose.
Anatomy of a Septic Tank
All of the water and waste that is carried by the water run down the home’s drain system and into a single main sewer pipe that leads to the septic tank in a classic septic system. In some cases, the flow of wastewater is simply dictated by gravity, while in others, it is aided by a mechanical pump. When the septic tank is full, the solids settle to the bottom and the oil, grease, and liquids — which eventually become the scum — rise to the top of the tank, where they are discarded. At maximum capacity, liquids on top of scum run via porous pipes and into an adjacent drain field, which has been prepared with gravel and other particles in order to aid in the dispersion of the liquid waste.
It is almost sterile by the time liquid waste makes its way down to groundwater sources.
Anaerobic bacteria are responsible for this decomposition. These solid wastes are decreased in bulk significantly as they decompose if the bacterial activity is successful. Margot Cavin’s novel The Spruce
When to Have Your Septic Tank Pumped
An inspection of a septic tank should be performed every two to three years, with mechanical pumping necessary every three to five years to empty the tank, according to the Environmental Protection Agency (EPA). Pumping may be required on a yearly basis for systems that are inadequate or that receive a lot of demand. System components such as electrical float switches, pumps, and mechanical components must be examined more frequently, generally once a year, in certain cases. When you pump your septic tank, you’re getting rid of sludge from the bottom of the tank, and you need to do it as soon as possible since sludge can build up to the point where it stops the outflow pipe, which allows liquids to flow into the drain field.
- Typical for larger houses, waste generation increases, causing the septic tank to fill up more quickly
- Size of the household The amount of wastewater produced is as follows: If there is an excessive amount of wastewater going into the septic tank, it might have an impact on how quickly the tank fills. The amount of particles included in the wastewater is as follows: Households with a large number of toilets or who often use garbage disposals have a tendency to fill their septic tanks more quickly. Septic tank capacity: Larger tanks can retain more solid sludge and, as a result, will need to be pumped less frequently.
There are a few methods that might assist you in estimating when you should have your tank pumped. For example, a typical four-bedroom house may have a 1,200 to 1,500 gallon tank, and if you have a family of four, you may expect to have the tank pumped every 3 to 5 years under normal circumstances.
How a Septic Tank Is Pumped
The expert who inspects and services your septic tank will notify you when it is necessary to pump out the sludge from the tank, if you have a septic service professional who does so on a regular basis. This occurs when the floating scum layer that exists between the sludge and the floating water is within approximately 6 inches of the outflow pipe leading to the drain field. Septic service specialists arrive in a huge tanker truck with vacuum equipment, and when the lid has been removed from the septic tank, they introduce a large hose into the tank through the manhole they have created.
This helps to break up the particles and mix them with the liquid material, which helps the pumping process run more efficiently.
Tips for Maintaining Septic System
There are various proactive actions you can take to ensure that your septic system runs properly and that the frequency with which it must be pumped is reduced. These include the following:
- Reduce your water use. Utilizing toilets and faucets with high water efficiency and water conservation may significantly reduce the quantity of water that enters the septic system and causes it to backup. Water leaks and drips should be repaired as soon as possible in order to avoid misuse of water, which can lead to the septic tank filling up faster. Reduce the amount of solid trash produced: Another technique to ensure that the septic system is operating correctly is to keep track of the solid waste that enters it. Trash that is either washed down the drain or flushed down the toilet can cause the septic system to become overburdened. Other than toilet paper, don’t flush anything down the toilet. Also, avoid utilizing a trash disposer that dumps organic food wastes into the septic system, which might cause problems. Even though it takes just a small amount of work, throwing things in the trash makes a significant impact in how well the septic system is managed. Rainwater should be directed away from the drain field. Rain gutters and landscaping grading that direct water into the septic system’s drain field can impair the field’s capacity to distribute water from the septic system.
- Hot tubs should not be drained into the sewer system. Water from hot tubs or swimming pools should be discharged onto the yard rather than into the drain field, since this might impose an unnecessary strain on a septic system. It is best not to flush chemicals down the toilet. Avoid flushing chemicals down the toilet because they can interfere with the bacterial process that breaks down solid wastes. There are also several other commercial septic tank additives, which are often more harmful than beneficial. Use of septic tank chemicals is not recommended unless it has been prescribed by a trustworthy specialist.
Septic System Frequently Asked Questions
Water consumption should be reduced. Utilizing toilets and faucets with high water efficiency and water conservation may significantly reduce the quantity of water that enters the septic system and requires treatment. One further method of reducing the misuse of water, which can cause the septic tank to fill more quickly, is to repair leaks and drips. Solid waste reduction: Another method of ensuring that the septic system is in proper operating order is to monitor the solid waste that enters the tank.
- Other than toilet paper, don’t flush anything down the toilet, and avoid using a garbage disposer since it might send organic food wastes into the septic system.
- Rainwater should be diverted away from the drainage system.
- ; Draining hot tubs into the sewer system is not recommended.
- Make sure you don’t flush chemicals down the toilet!
Aside from that, there are several commercial septic tank additives available that are typically more harmful than beneficial. Use of septic tank chemicals is not recommended unless it has been suggested by a trustworthy specialist;
What is a Drainfield?
The drainfield, also known as the leach field, is the area where the water from your septic system is sent after it has been cleansed and filtered. It is necessary to construct a drainfield in order to ensure that water is distributed uniformly back into the soil.
How do I find my septic system?
If you’re fortunate enough to have a contemporary septic system in your yard, it may be equipped with an access lid that is visible from the ground floor. If this is the situation at your residence, locating your septic system is as simple as taking a few steps into your backyard. It’s unfortunate that this isn’t true for older septic systems. It’s possible that you may locate an older system in your home by checking for greener, faster-growing grass or even an area with less growth than the rest of your yard if you live in an older home.
This will show you exactly where your septic system is located in your yard, if you have one.
You’ll need to look for the location where your septic system’s sanitary line exits your home and follow that line until you find your septic tank, which will take some time.
If you are unable to discover your septic system, your yard may need to be dug up by a septic system installation in order to locate your septic tank as a last option.
How long do septic systems last?
Septic systems are not designed to endure for a specific number of years, thus there is no defined time frame. In the event of adequate maintenance, you may expect your septic system to last several decades before it has to be replaced; but, if your system fails or deteriorates as a result of bad care, its lifespan will be drastically diminished. In order to obtain an accurate estimate of how much longer the life of your septic system may be extended, you must first have it checked thoroughly by an experienced septic system installation or repairer.
What’s the advantage of installing a newer septic system rather than an older system?
Although it is not required to install a new system, there are advantages to having a modern septic tank rather than an older one. For starters, when you get a new septic tank, you can be confident that it will serve you for decades if it is properly maintained, and you will not have to worry about it being “too old.” Additionally, newer systems have been modified to reduce the likelihood of your system becoming clogged, and if something does go wrong with a new system or when it comes time to have your septic system pumped, a new system will likely be easier to locate because they are frequently constructed with ground-level lids.
New septic systems also provide a further treatment for your waste water, allowing it to be cleaner before it is released into the surrounding environment.
All of that being said, if your property currently has an older septic system installed, it should not need to be updated as long as it complies with the standards of your local health department and is in excellent operating order.
How much does a new septic system cost?
Installation of new septic systems may be a significant financial commitment, with costs typically reaching tens of thousands of dollars. Whenever you have to replace an outdated septic system, you should look into financing alternatives that will make it simpler for you to pay for a new septic system in the long run. Purchase further information from a septic system installation business on how to obtain septic systems at the most competitive prices while also taking advantage of low-interest financing options.
How big is my septic tank?
Septic tank capacity is determined by the amount of water consumed in your property as well as local codes and requirements. Check with your local health agency to find out how big your tank is before installing it.
Why should my septic system be pumped out?
Without regular pumping, the gases emitted by human waste accumulate in your septic system, increasing the risk of septic tank damage and the need for more frequent pumping. The regular pumping of your septic system will allow you to limit the rate at which your tank deteriorates and save money in the process. It’s crucial to remember, though, that degeneration is unavoidable in the long run. It is only via regular maintenance, such as pumping your tank, that your septic system will survive longer.
Does my tank need to be dug up to know if it needs to be pumped?
Risers are commonly found in newer septic systems, which allow you to access your tank from the ground level through a lid. It is straightforward for any septic system professional to determine whether or not your yard has risers placed, and whether or not it is necessary to pump it. If, on the other hand, your tank cannot be accessible from the ground level, it will need to be dug up in order to determine whether it has to be drained. Instead of inspecting your septic system to see whether it needs to be pumped on a regular basis, set a timetable for having your system pumped every 2-3 years.
Why should I have risers and lids installed on my septic system?
As a result, when it comes time to find, pump, or repair your septic system, risers are the best choice since they provide ground-level access to your system. Having a septic system lid will allow you to mow your grass while still being able to find your system with no difficulty. Lids and risers also have the advantage of being accessible all year round, as opposed to earlier septic systems that could only be accessed by digging a trench through your yard. If your septic system has to be pumped or repaired for any reason during the winter months, getting beneath layers of frozen earth can be difficult, if not impossible, and you may be forced to wait until the spring to have access to your tank again.
How often should my septic system be pumped out?
A typical septic system contains a 1,500-gallon tank, which needs to be pumped around every 2-3 years for a household of four, according to industry standards. If you have less than four people living in your house, you will most likely be able to pump your septic system every five years rather than every three.
You should speak with your local health agency to determine the exact size of your tank, and you should consult a septic system business to determine how frequently your tank should be pumped based on the size of your family and the size of your septic tank.
Do I need to have the septic tank pumped if I’m selling my house?
Consult with your local health department to learn about the restrictions that apply to your region of residence. Generally speaking, as long as your septic system has been pumped on a regular basis by a licensed septic system company and recently enough for the new homeowners to be able to live there for a year or two without having to pump the septic system, you should not be required to have it pumped again in the near future.
How do I find someone to pump my septic system?
It is important to be aware that not all septic system businesses are licensed and that not all firms properly dispose of or recycle the waste they pump from your septic system when you are looking for one to pump it. Finding a firm that complies with EPA standards should be your first concern, and then you should look at price, how pricing is split down, and which company is delivering the most honest, economical, and dependable service should be your next consideration. Investigate business evaluations, and when you select a septic system provider to pump your septic tank, be certain that they do the work properly, leaving enough water and waste to keep the sewage decomposing while leaving no visible trace more than a few inches of waste behind.
How much does it cost to have my septic system pumped?
It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, so it is always wise to shop around before making a decision. You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system long before it should have been replaced in the first place.
What happens if I don’t have my septic system pumped?
The sediments will pile up in your septic tank if you don’t pump it out regularly, ultimately overflowing into the drain field and clogging the drain field. Backups can occur, causing damage to your property and even necessitating the replacement of your drain field, which can be a very expensive error.
I just had my septic system pumped. Why is it full already?
Septic systems are designed to refill rapidly since the purpose of pumping is not to remove water but rather to remove non-biodegradable waste, and the water itself is not the aim of pumping. Once your septic system has been pumped and you begin to use the water in your house, your tank will quickly refill in order to maintain good operation of the system. If the water level rises to a point where it is above the outlet line, contact your septic system service provider for assistance immediately.
What do you look for when inspecting my septic system?
When we do an inspection, we make certain that your septic system is in good operating condition and that it satisfies the standards for receiving a Certificate of Compliance. If you’re planning to sell your home, you should have your septic system checked out by a professional who is certified by the Minnesota Pollution Control Agency. This will allow you to sell your home faster and for more money, if you can prove that your system has been checked out by an accredited professional. The level of liquid in your septic tank will be checked, and we’ll make sure there is no surface-level discharge.
We’ll also note whether the level of solid waste in your septic tank indicates that it should be pumped, and whether any repairs are required to improve the overall functionality of the system.
The drains in my home aren’t draining as quickly as they normally do. Does this have to do with my septic system?
Drains that are clogged and that empty slowly are not necessarily a big source of concern. Before presuming that there is an issue with your septic system, check sure that there isn’t anything obstructing your drain first. In the case of one plumbing fixture in your house that is draining slowly, it is likely due to clogging; however, if all of the drains in your home are slow or leave waste backed up, it is probable that your septic system requires inspection and may even require pumping.
What happens when my septic system fails?
Symptoms of a failing septic system may include minor issues such as drain breaks or pipes that have been stopped, which can be caused by tree roots intersecting with the system. Septic system failure, on the other hand, might indicate that your septic tank has degraded to the point that it cannot be repaired and must be replaced. A blocked drainfield will hopefully not become your problem because it is the most expensive component of your system to replace; nevertheless, if it does, you must act quickly to make the necessary repairs or else your waste will continue to back up, perhaps causing damage to your property.
You’ll need to replace the drainfield as soon as possible to avoid further pollution of drinking water sources.
How do I prevent my septic system from failing? How can I properly maintain my septic system?
Your septic system should degrade at a normal rate over the course of several decades if you maintain it on a regular basis. Maintenance normally consists of getting your septic system pumped on a regular basis and making certain that you do not flush or wash anything down the drain that might block your septic system.
What shouldn’t I flush down the toilet?
Your septic system should degrade at a normal rate over the course of several decades if you do regular maintenance. In most cases, maintenance consists of having your septic system pump out on a regular basis and making sure you don’t flush or wash anything down the drain that might block your septic system.
What shouldn’t I pour down the drain?
Grease from the kitchen, motor oil, anti-freeze, gasoline, paint, and food should not be flushed down the toilet or drain. You should avoid flushing anything down your drain other than soap and water, and you should especially avoid flushing any form of chemical down your drain that should not be recycled back into the environment, such as fertilizer.
Is using a garbage disposal bad for my septic system?
Using a trash disposal will result in the requirement to pump your septic system more frequently than you would otherwise need to do if you avoided flushing food particles down your drains. Too much food collection in your tank might cause your drainfield to clog since the microorganisms in your tank are not capable to digesting it. When using a trash disposal, check with your septic system company to find out how frequently the disposal should be serviced.
Should I add bacteria to my septic system?
Aside from being completely useless, introducing bacteria to your septic tank is also highly discouraged. The bacteria produced by human waste is sufficient to break down the solid sewage in your tank without the need of bacteria supplements or other methods. If, on the other hand, multiple members of your home are using pharmaceuticals, they will enter your septic system through human waste and kill some of the beneficial bacteria in your tank, causing it to malfunction.
Please contact the firm who installed your septic system to see whether or not you should be worried about the amount of bacteria-killing compounds entering the system.
There’s a strong sewer odor outside of my house. Could this be my septic tank?
In general, adding bacteria to your septic tank is a waste of time and money. The bacteria produced by human waste is sufficient to break down the solid sewage in your tank without the addition of bacteria additions to the tank. For example, if you have a large number of medicine users in your family, these pharmaceuticals will enter your septic system through human waste and kill some of the beneficial bacteria in your tank. Please contact the manufacturer of your septic system for information on whether or not you should be worried about the quantity of bacteria-killing compounds entering the system.
Can my septic system contaminate nearby water?
It is possible for your septic system to pollute surrounding water sources if it is not properly managed or fails completely. In the event that you suspect that your septic system is failing, make sure that it is routinely pumped and inspected by an expert.
My gutters’ downspouts drain into my yard above my septic system. Is this a bad thing?
The drainage of your gutters into your yard above your septic system, and particularly into your drainfield, can be hazardous to your septic system. All water should be diverted away from your septic system in order to minimize flooding and damage to your septic system’s tank or drain field.